Top Taper Gauge

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better. ⑤ Can't fit to any threadless piercing jewelry..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the siz....
Check Stock

Painful Pleasures Threaded Taper for Ears Piercing and Stretching Kit For Navel Nose and Other Areas Medical Grade Stainless Steel 1 Inch Long 1.2mm at Thickest Point 16g

  • MADE FROM STAINLESS STEEL - This threaded taper is made from polished, 316L ASTM F-138 Implant-Grade Stainless Steel. This helps to prevent irritation and can be easily cleaned..
  • SINGLE OR MULTIPLE USE - Sold individually. These ear tapers can be autoclaved for multiple insertions or disposed of after a single use. Each one is sealed and wrapped..
  • TAPER SIZE - Measures 1-inch long and 1.2mm at its thickest point. The taper gauge offers internal threading of 0.9mm. Can be used on navel, nipple, and other areas..
  • FOR THREADLESS OR INTERNALLY THREADED JEWELRY - Use the pin hand taper for a hassle-free install of 16g threadless or internally threaded jewelry in one, swift motion..
  • VERSATILE - Ideal to use as a piercing and ear stretching kit. Or to stretch out and change jewelry in existing nose piercings, nipple piercings, belly piercings, lip piercings and eyebrow piercings..
Check Stock

Beslands Dial Indicator Bore Gage Gauge, Stem Length 6'', Cylinder Dial Bore Gage with Carbide anvils (2\-6\ Range)

  • Dial indicator includes jewel bearing, including ABS storage box.
  • Ultra-precision bore gauge The deep bore gauge with a depth of 10 inches allows users to measure out-of-round conditions and cylinder taper without having to disassemble the piston-this gauge can reach critical wear areas of the cylinder block..
Check Stock

Body Candy Womens Ear Plug Gauges Organic Hand Carved Wood Nautical Anchor Hanger Plugs Stretched Ears 2G

  • Curved taper features a nautical anchor shape.
  • Sold as a set of 2 hand carved wooden nautical anchor ear plugs.
Check Stock

Painful Pleasures Threaded Taper for Ears, Piercing and Stretching Kit For Navel, Nose, and Other Areas, Medical Grade Stainless Steel, 1 Inch Long, 1.2mm at Thickest Point, 16g with 0.8mm Threading

  • MADE FROM STAINLESS STEEL - This threaded taper is made from polished, 316L ASTM F-138 Implant-Grade Stainless Steel. This helps to prevent irritation and can be easily cleaned..
  • AUTOCLAVE SAFE - These ear tapers can be autoclaved for multiple insertions or disposed of after a single use. Add 1” piercing needles to pierce and install internal jewelry in one motion..
  • TAPER SIZE - Measures 1-inch long and 1.2mm at its thickest point. The taper gauge has a 0.8mm x 2.0mm thread on the end and offers internal threading of 0.8mm. Use on navel, nose, and other areas..
  • FOR INTERNALLY THREADED JEWELRY - Use the hand taper to install 0.8mm thread pattern jewelry. Our bent and circular 16g internal is 0.8mm threading. Not suitable for 0.9mm Labrets and Straights..
  • VERSATILE - Ideal to use as a piercing and ear stretching kit. Or to stretch out and change jewelry in existing nose piercings, nipple piercings, belly piercings, lip piercings and eyebrow piercings..
Check Stock

POWERTEC 71035V Table Saw Angle Cutting Jig for Creating Tapered Cuts | 24-Inch Lightweight Aluminum Rails and Laser Etched Scale, 15 Degrees of Taper, 1 PK

  • INCLUDES: (1) Table Saw Taper Cutting Jig with 24” rails with work stops, ergonomic handle, lock knob and laser etched scale.
  • FUNCTION: Used as a taper cutting guide for table saws, this easy-to-use carpentry tool helps you make long cut cuts at angles from 1” per foot (4.8 degrees) or up to 3” per foot (15 degrees).
  • VERSATILE: Perfect for making angled cuts, projects that require a little taper or other woodworking projects such as building kitchen table legs, chairs, wood shelves, wedges and more..
  • PREMIUM: Made with an extremely durable, yet lightweight extruded aluminum construction that offers anti-corrosive properties and a high strength-to-weight ratio for heavy-duty applications.
  • FEATURES: Sturdy construction and design with extruded legs with anodized finish, tapered handle with rounded head and textured finish, improved laser engraved 17 gauge steel hinge plate.
Check Stock

Fowler 52-646-100 Dial Bore Gage Set, 0.7-1.5

  • Two-point contact for detection of geometry problems such as ovality and taperCarbide-tipped contact points for extended wear and improved abrasion resistanceDescriptionThe Fowler Dial Bore Gauge Set has gradient spacing of 0.0005" and the insulated grip offers extra stability while taking measurements. The gauge utilizes a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points offer extended wear and improved abrasion resistance..
Check Stock

1-15mm/1/32-5/8 Stainless Taper Welding Gauge Test Ulnar Welder Inspection Inch & Metric for Measuring of Cylindrical Bores

  • Figures and increments both inch and metric are etched into surface.
  • For measuring of slot width, gap hole and etc..
  • Gauge is made of stainless steel, durable.
  • Welding taper gauge: 1-15mm (1/64-5/8 inch).
  • Light weight, and can be easily carried in your pocket.
Check Stock

Jovivi 2 Pairs Stainless Steel Taper Kit with Plugs Black Ear Stretching Kit Gauges Set 0G 8mm

  • Ear Gauges Expander Stretching Kit Includes 1 Pair Taper Spike and 1 Pair Single-Flared Tunnels Plugs. (There are Gauge 12G 8G 6G 4G 2G 0G 00G, please choose your size.).
  • Material: Made with high quality Stainless Steel..
  • 2 Pairs Ear Tapers Spike and Tunnels Set. Great stretching kit for beginners..
  • All styles are individually packaged according to size and style. Each order comes with one JOVIVI gift velvet bag!.
Check Stock

Shankly Dial Bore Gauge 0.001m Deep Engine Hole Cylinder Measurement Inside Micrometer Gage Cylinder Tool Kit 2m to 6m Comes with Carrying Case for Bore Measure

  • ✅ ACCURATE & PRECISE: This dial bore gauge is primarily used by machinists to precisely measure the inner diameter of bores in motor engines. When measuring cuts or hole sizes, a dial bore gauge's speed and accuracy can save a lot of time.
  • ✅ MEASURING RANGE: With this dial gauge, you can easily and accurately measure cylinder bores for taper. They have a measuring range of 2-6m and 0.001m and are equipped with a self-centering guiding protective bridge for dependable and repeated use.
  • ✅ WELL-CONSTRUCTED ENGINE TOOL: A dial bore gauge that is built to be irreplaceably reliable and precise, allowing for more efficient and trouble-free repairs. This premium bore gauge is built to last.
  • ✅ HEAVY-DUTY CARRYING CASE: Our bore gauge comes neatly in a tidy blow molded case with a built-in handle and slide latches that will make it simpler for you to keep track of each tool and arrange the entire set.
  • ✅ SATISFACTION GUARANTEED: We stand by the term "quality," and all of your items will arrive in good condition when you order from Shankly. Please contact us if you have any questions about your purchase. We will gladly assist you.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...riors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carryin....
Check Stock

Ruifan Unisex 2 in 1 Stainless Steel Screw Fit Interchangeable Taper Plug Piercing Ear Tunnel Stretcher Expander 6G 4G 2G 0G 00G Gauge

  • 2-in1 Steel Screw Fit Interchangeable Plug Tunnel - 6G 4G 2G 0G 00G,ONE PER SIZE,asle can use to stretchering your piercing gauge..
  • Gauge: 6G=4mm,4G=5mm,2G=6mm,0G=8mm,00G=10mm.
  • 15 PCS Per Pack: 5 tapers, 5 tunnels, 5 internally threaded screw on backs (for the tunnels),in different size 6g 4g 2g 0g 00g(each size one set, come with one free gift velvet bag..
Check Stock