Top Taper Shank Tap Chucks
6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case
- COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
- No more using a drill to drill the hole and then tapping it out later with another tool..
- HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
- HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
- you can use them in aluminum, plastic, wood and other thin soft material metal panel.
- When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
- EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
- Back taper exceeds the tap to prevent over-drilling and damage to the thread..
- WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check StockYonico 43031S 2-Inch Diameter Steel Forstner Drill Bit 3/8-Inch Shank
- This steel forstner bit has a 2" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
- Drill clean and accurate holes in solid wood, plywood and MDF.
- Constructed from high-speed-steel for quality and longevity.
- The 3/8" shank is compatible with all standard drill and drill press chucks.
- Hardened steel constructions for increased rigidity.
Check StockYonico 43015S 1-Inch Diameter Steel Forstner Drill Bit 3/8-Inch Shank
- This steel forstner bit has a 1" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
- Drill clean and accurate holes in solid wood, plywood and MDF.
- Constructed from high-speed-steel for quality and longevity.
- The 3/8" shank is compatible with all standard drill and drill press chucks.
- Hardened steel constructions for increased rigidity.
Check StockWIDIA GTD GT275016 Victory GT27 HP Tap, Full Bottom Chamfer, Right Hand Cut, 6 Flutes, Forming, 7/16-20, HSS-E-PM, TiCN Coating
- Advanced forming geometries designed for superior tap performance steel and stainless steel.
- Manufactured with fine-grain micro grain carbide for exceptional wear life.
- Ideal for long production runs where fewer tool changes mean greater productivity.
- Runs up to 4x faster and lasts up to 4x longer than conventional high-speed steel taps, Excellent thread quality and tap performance.
- Form E Bottoming Entry Taper, DIN Length ANSI Shank.
Check StockQjaiune 2pcs M14x1.5 Tap M14 Metric Thread Tap Right Hand Thread Tapping Tool HSS Thread Milling Taps M14 x 1.5 Taper & Plug Tap
- ✿M14x1.5 Machine Tap: This mini thread tap has a standard size, which can machine threads on most metals, and can also be used to repair damaged or blocked threads..
- ✿High Quality Material: Metric tap is made of high-quality high speed steel, with high hardness and strong wear resistance. It can be used on tapping machines, drilling machines and CNC lathes..
- ✿Wide Range of Application: M14 x 1.5 tap has high hardness and can be used for thread processing on metal, iron, copper, aluminum alloy, stainless steel, zinc and other metal materials..
- ✿Package Contains: 2 x M14x1.5 Metric Tap (Taper & Plug Tap), Thread Diameter: 14mm, Pitch: 1.5mm, Total Length: 2.91 Inch / 74mm, Working Length: 1.26 Inch / 32mm, Shank Diameter: 0.42 Inch / 10.6mm..
- ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock3/4\-14 NPT Pipe Tap,American Standard Tap Tool
- Each taper tap is used to cut internal threads in pipes.
- This taper tap is ideal for pipe fittings.
- Taps are tapered at a rate of 3/4 inches per foot.
- Nominal size of the tap is that of the pipe fitting being tapped.
- 1/4" size with 18 NPT (National Pipe Taper).
Check StockUnion Butterfield 1985(UNF) High-Speed Steel Spiral Point Tap, High-Hook, Black Oxide Finish, Round Shank with Square End, Plug Chamfer, 4-48 Thread Size
- Spiral point tap pushes chips ahead of tool to reduce clogging.
- Spiral point tap with straight flutes for cutting threads in through holes.
- Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup.
- Relieved-style design with high hook, special outside diameter and pitch diameter relief, and increased back taper for free cutting action.
- Some sizes are recessed between body and shank for deep-hole applications.
Check StockIRWIN Drill Bit, 3-Cutter, Self Feed, 2-Inch (3046010)
- Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
- Replaceable screw-point tip pulls the drill bit fast for clean, true holes.
- 7/16-inch hex quick-change impact shank reduces slipping in standard chucks.
- IRWIN drill bits are compatible with most 7/16-inch impact drills.
Check Stockuxcell Thread Milling Tap Metric M1.8 x 0.35, Titanium Coated Cobalt HSS (High Speed Steel) 3 Straight Flutes Machine Micro Screw Threading Tap for Watches and Clocks, 2pcs
- SquareEnd Size : 5 x 5mm/ 0.2" x 0.2"(L*W).
- Package Content : 3 x Hand Tap1 x Plastic Storage Case.
Check StockIRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)
- IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
- This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
- A full screw tip allows the drill bit to self-feed for ease of drilling.
- The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
- Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
- A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
- Fits all standard 1/4-inch quick change chucks.
- Full screw tip allows the bit to self feed.
Check StockAUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC
- Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
- Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
- This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
- 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
- Storage case is lightweight and durable for easy storage and is portable for all job environments.
Check StockSwordfish 8045 - Metric Alloy Steel Hand Threading Tap Set of 3 pcs Bottoming Plug Taper Uncoated Finish Square End M22x2.5
- Straight Flute Type, Round with Square End Shank, Uncoated (Bright) Finish.
- Each set includes 1 taper, bottoming and plug tap in the specified size.
Check Stock