Top Tapered End Mill For Carbon Fiber

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8 Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Fiblink Surf Spinning Fishing Rod 3-Piece Graphite Travel Rod Portable Spin Rod (9-Feet & 11-Feet & 13-Feet) (Length: 15')

  • Sensitive and Solid Carbon Fiber Construction – Carbon-fiber technology decreases weight and increases stiffness. It’s for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for fishing..
  • High Performance – Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • Non Slip Rubber Shrink Tube Handle – Non slip rubber shrink tube handle with tapered rear grip. Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat – Plastic wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
Check Stock

Fiblink Surf Spinning Fishing Rod 2-Piece Carbon Travel Fishing Rod (Length: 10')

  • Sensitive and Solid Carbon Fiber Construction - Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing..
  • High Performance - Stainless steel mixed with ceramic guide makes it more smooth, avoids line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The double footed stainless steel guide frames keep your line running straight..
  • Non Slip Rubber Shrink Tube Handle - Non slip rubber shrink tube handle with tapered rear grip Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat - Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
Check Stock

Fiblink Surf Casting Fishing Rod 2-Piece Graphite Travel Baitcasting Fishing Rod (Length: 10')

  • Sensitive and Solid Carbon Fiber Construction - Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing..
  • High-Quality Guides - Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • Non Slip Rubber Shrink Tube Handle - Non slip rubber shrink tube handle with tapered rear grip Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat - Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
  • Excellent Design - Design concept of durability and toughness, perfect strength to weight ratio.
Check Stock

Fiblink Surf Spinning Fishing Rod 4-Piece Graphite Travel Fishing Rod(11-Feet & 13-Feet & 15-Feet) (Length: 15')

  • Sensitive and Solid Carbon Fiber Construction – Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing..
  • High Performance – Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • Non Slip Rubber Shrink Tube Handle – Non slip rubber shrink tube handle with tapered rear grip Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat – Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
  • Excellent Design – Precise data calculation and the perfect combination of performance presents a cost-effective pole..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock