Top Tapered Taps

NEIKO 04204A Hex Head Multi-Spline Screw and Bolt Extractor Set | 25 Piece Easy Out Screw Extraction | Broken Bolt remover | 1/8” to 7/8” in 1/32” Increment | Cr-Mo | Stripped Fastener Tool

  • For helical coil wire screw thread insert taps.
  • Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
  • Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
  • Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
  • When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

Capezio Jr Footlight T-Strap Black Dance Shoe - 10 M US

  • Begin with street shoe size - 1/2 size up.
  • Nappa PU upper, Scored leather sole, Tele Tone toe and Duo Tone heel taps are compatible but not attached.
  • Moisture absorbent microfiber lining, Foam padded footbed, Achilles notch for comfort.
  • Folded edges, Leather buckle, Slightly tapered toe box.
  • Closed toe and sides, 2" heel with leather top lift, Light shank.
Check Stock

HHIP 2006-2026 1/4 Taper 3/4 Spiral Flute Pipe Reamer.406 - .472 Diameter 1-1/16 Length 2-7/16 OAL

  • Designed for reaming holes to be tapped with American standard taper pipe taps (NPT).
Check Stock

Capezio Jr. Footlight T-Strap Black Dance Shoe - 9 M US

  • Begin with street shoe size - 1/2 size up.
  • Nappa PU upper, Scored leather sole, Tele Tone toe and Duo Tone heel taps are compatible but not attached.
  • Moisture absorbent microfiber lining, Foam padded footbed, Achilles notch for comfort.
  • Folded edges, Leather buckle, Slightly tapered toe box.
  • Closed toe and sides, 2" heel with leather top lift, Light shank.
Check Stock

Capezio Jr. Footlight T-Strap Black Dance Shoe - 8 M US

  • Begin with street shoe size - 1/2 size up.
  • Nappa PU upper, Scored leather sole, Tele Tone toe and Duo Tone heel taps are compatible but not attached.
  • Moisture absorbent microfiber lining, Foam padded footbed, Achilles notch for comfort.
  • Folded edges, Leather buckle, Slightly tapered toe box.
  • Closed toe and sides, 2" heel with leather top lift, Light shank.
Check Stock

20 PCS Tap and Die Set - Metric Size M3 M4 M5 M6 M7 M8 M9 M10 M12 Tap Set and Die Set Threads Tapping Threading Tool Kit with Wrench Handle Storage Box

  • 【Durability & Premium Material 】: This metric tap & die set made of industrial grade GCr15 bearing steel construction ensures durability and long....
  • 【Easy to Be Used】: Tapered design coarse and fine taps and dies to make it more smoothly and easily create and rethread internal and external....
  • 【Accuratly Cutting Performance】: Perfect threading manufacturing process,precisely CNC machined with qualified surface treatment, rockwell....
  • 【Package Included】: Contain with 9 x metric taps and 9 x metric dies in muilti normal size, (M3 x 0.5mm), (M4 x 0.7mm), (M5 x 0.8mm), (M6 x 1mm),....
  • 【Wide Application & Brand Guarantee】: It can create new threads and repair damaged threads on metals like stainless steel, copper, aluminum,....
Check Stock

KECHUANG 60-Pieces Tap and Die Set Metric and SAE Standard Internal and External Threaded Tool Set

  • ► PREMIUM MATERIAL- Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ► EXCELLENT CUTTING PERFORMANCE-All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance, Can cut materials such as cast iron, steel, aluminum, copper, Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • ► VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ► EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • ► WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Check Stock

Starrett 162A Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0-0.040\ (1mm) with Tapered Collet, Knurled Rings, Nickel Handle

  • FINGER ROTATING DESIGN: The Starrett 162 Pin Vise features small handles that allow you to rapidly rotate between thumb and finger when filing small work.
  • HOLDS UP TO 1 MM: This model pin vise securely holds workpieces up to 0.040" (1mm) in diameter, including small stock, taps, drills, reamers, scribers, wire, small files, and other tools.
  • PREMIUM HOLDING DEVICE: Knurled rings and handle provide a secure grip, and the nickel plated handle and binding nut offer last-lasting durability and wear-resistance.
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces.
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface Measurements are 1-11/16" handle length, 3/16" handle diameter, and 3-3/32" overall length with chuck closed.
Check Stock

Starrett 166C Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0.050 - 0.125\ (3.21mm) with Insulated Octagonal Handle for Shock Protection, Tapered Collet

  • NoN-ROLLING OCTAGON SHAPE: The Starrett 166C Pin Vise has an Octagon-shaped handle that prevents the tool from rolling when it’s set down..
  • HOLDS UP TO 3.2 MM: This model pin vise securely holds workpieces sized between 0.050" - 0.125" (1.3mm - 3.2mm), including small stock, taps, drills, reamers, scribers, wire, small files, and other tools..
  • SHOCK PROTECTION: This pin vise features an insulated PVC handle, which protects the user from electric shocks..
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces..
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface. Measurements are 2-5/32" handle length and 3-55/64" overall length with chuck closed..
Check Stock

GMTOOLS 110PCS Tap and Die Set Metric Size Standard Threading Tool Set M2-M18 with Adjustable Handles Accessories and Storage Case Tap & Die Set for Cutting External and Internal Threads

  • [High-Quality Materials]: This metric tap set is made of high-quality hardened alloy steel, improving product hardness, wear-resistance, and increasing product service life, durable and superior strength..
  • [Excellent Performance]: Suitable for re-threading fasteners and fastener holes, cutting or updating internal and external threads. Fully ground & high-precision tap is sharp for tapping and chip removing operation, running smoothly and efficiently..
  • [Versatility]: Tapered Teeth Design starts threading more easily and smoothly, and prevents over-threading. Suit for creating new threads or repairing damaged threads on metals like carbon steel, cast iron, aluminum and stainless steel..
  • [Most Common Sizes in Metric]: This tap and die set comes with 110 pieces totally in a storage case. This metric tool set Include: 1) 35 pcs plug taps.
  • [Portable Case]: Each tap and dies set is equipped with a iron toolbox which is engraved with corresponding scales. And it’s convenient to store them in the case to prevent dust..
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • ...nd lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch (24.4cm x 12.1cm x 3.8cm) metal carrying case with a plastic molded insert tray for easy transportation, safe storage, and quick organization.
Check Stock