Top Tapping Lubricant For Titanium

Aceteel Metric M12 X 1.25 HSS Ti-Coated Straight Flute Thread Tap, M12 X 1.25mm Titanium Coated Thread Machine Tap Right Hand

  • 【Size】Length: 3.50"/89mm, Thread Head: 1.14"/29mm, Square Head: 7.1mm x 7.1mm (L*W), Shank Diameter:9.0mm, Pitch: 1.25mm..
  • 【Feature】Straight flute thread design, made of High-speed steel with high hardness and toughness, Titanium coating for improving wear and fusion resistance, long service life..
  • 【Application】Make or repair thread, suitable for most metals, copper, alloy steel, stainless steel(below 30HRC), cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC..
  • 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping..
  • 【Package Included】1pc Metric Right Hand M12x1.25mm High-Speed Steel Titanium Coated Thread Tap..
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

uxcell Spiral Point Plug Threading Tap UNC 5/16-18 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Specifications: Thread size: UNC 5/16-18.
  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade

  • Tap Size: M1.8 x 0.35 metric thread, H2 thread tolerance grade. Straight flute design, downward chip removal, fast tapping with accuracy. Titanium coating can improve wear resistance, corrosion resistance and rust protection..
  • Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
  • Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.
Check Stock

uxcell Spiral Point Plug Threading Tap M4 x 0.7 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

Wokesi M1.20.25 High-Speed Steel TiN Coated Metric Standard Thread Forming Taps Fluteless Taps Extrusion Taps Thread Drill Thread Milling Plug Chamfer Right hand (M1.20.25)

  • plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
  • Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
  • Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.
Check Stock

Titanium Corrosion Inhibitor and Lubricant Spray for Metal – Industrial Heavy Duty Rust Prevention Spray for Automotive – Water Resistant Non-Flaking Aluminum-Free Fluid Film by Metaflux 13.5 Oz 1 pack

  • CORROSION PROTECTION: Our corrosion inhibitor prevents wear out, seizing and corrosion of mechanical connections and on exposed metal surfaces. It....
  • PREMIUM FORMULA: Our rust prevention spray is highly resistant to saltwater, water, oil, petrol, most acids, lye, gases, and vapors. It is....
  • TITANIUM-BASED LUBRICANT: The performance-driven and heavy-duty lubricant spray for metal is based on titanium, doesn’t contain copper, nickel and....
  • REDUCES VIBRATION NOISES: Designed to protect against rust and increase the effectiveness of lubrication, our rust inhibitor spray helps reduce....
  • WIDE RANGE OF USES: Metaflux anti corrosion spray is formulated to improve the replacement of moving parts on CNC and milling machines. It is widely....
Check Stock

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

Makita A-97748 1/8\ Black Oxide Drill Bit, 1/4\ Hex Shank

  • [Specifications and packaging]: 33 Piece hex shank twist drill bit set.Plastic case..
  • [Fitment]: Wood drill bit set for metal/wood/plastic sink. Suitable for home DIY, and general building/engineering use..
  • [Material]: Impact drill bits use classic high speed steel construction with titanium coating for capability and durability..
  • [Advantage]: Hex shank twist drill bit set drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • [Quick Replacement, Safe Installation]: Titanium drill bit fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
Check Stock

5/16\ - 36 HSS Right hand Thread Tap with 7.3mm Drill bit

  • 【Good Quality Material】High-speed steel 6542,tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life ..
  • 【Type】M3*0.5 /M4*0.7 /M5*0.8 /M6*1/M8*1.25,Pitch:0.5mm/0.7mm/0.8mm/1.0mm/1.25mm..
  • 【Size】Thread Diameter:3mm/4mm/5mm/6mm/8mm.
  • Shank Diameter:4.0mm/5.0mm/5.1mm/6.0mm/6.3mm.
  • Square Head Size:3.1x 3.1mm/4.0x 4.0mm/4.1x4.1 mm/4.6x4.6 mm/5.1x5.1 mm (L*W)..
  • 【Usage】Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps ..
Check Stock

Panyard Jumbie Jam Authentic Steel Drum Kit Chrome Finish with Tube Floor Stand

  • 【FEATURES】Material: Steel-titanium alloy material, low hardness, no iron knock, stable tone. 8-inch 8-note, color: white, scale: 8-note, F key, diameter: 8 inches, height: 5 inches, net weight: 2.6 pounds..
  • 【PACKAGE CONTENT】 1 x steel tongue drum, 1 x double mallet, 1 x mallet-shaped stand, 1 x music book, 1 x padded travel bag, 1 x spare scale sticker, 1 x selected set..
  • 【PROCESS】The rigid titanium alloy is used to make equipment and machine parts that require good comprehensive performance, with corrosion resistance and no heat treatment hardening. The electroplating and painting process makes the surface of the Steel Tongue Drum form a protective film, which is not easy to be corroded and does not peel off the paint, which can extend the service life of the Steel Tongue Drum. Hand-painted, moderate sustain. The sound quality is more ethereal..
  • 【SOUNDING PRINCIPLE】 The Steel Tongue Drum is a musical instrument that resonates the entire cavity by the vibration of the tongue, so whether you use drumsticks or bare hands, the purpose is to make the tongue vibrate effectively. The sound of playing with bare hands is softer and gentler, and the sound of drumstick playing is more penetrating..
  • 【SUGGESTION】When tapping by hand, it is recomm....
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....
Check Stock