Top Tapping Machine Kit Imperial

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

CalFlor KI75155 VersaBlock Tapping Block FlooringInstallKit

  • Pull bar and tapping block are built tough to withstand countless floor installations.
  • Heavy duty tapered pull bar, designed to be used on laminate and engineered flooring.
  • 8 mm reusable, wedge-shaped, stepped expansion spacers.
  • Solid heavy duty tapping block, not hollow, non-breakable.
Check Stock

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

  • Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
  • The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
  • Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
  • Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
  • Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
  • Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
  • The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....
Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

  • {Metric & Imperial Sized Standoffs} Bolt Dropper’s kit has both metric and imperial standoffs offering a 99% fit in all types of mother board installations. Other kits don’t include an imperial size standoff which is necessary in many installations. No need to buy multiple kits to try and find the right size fastener with Bolt Dropper’s..
  • {502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
  • {High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..
Check Stock

Professional Flooring Jack for Hardwood Flooring Installing and Positioning

  • 【24 Spacers 1/4”& 1/2”】 Tezoro flooring installation kit provides 24 pack flooring spacers, which has 1/4 inch and 1/2 inch gap, meet your different gap requirements. Made of high-quality PVC, durable and reusable, always staying in place..
  • 【Double-Sided Tapping Block】 Our reinforced tapping block is solid, durable polypropylene body is built to last. At the same time, it is equipped with 3 different edges making it suitable for multiple style of flooring as thin as 3.5 mm or as thick as 15 mm or more!.
  • 【Quality Enhanced Version】 Tezoro Laminate Wood Flooring Installation Kit provides durable Heavy Hammer with non-slip rubber grip. The hammer head is made of high-quality materials, strong and durable, not easy to be broken, which delivers a softened positive strike..
  • 【Reinforced Pull Bar】 Upgraded pull bar is longer, thicker and wider, and it will not be deformed even after long time use. With three high-protection soft pads attached at back to protect the floor..
  • 【Buy Risk Free】 Tezoro laminate flooring installation kit will give you a Lifetime warranty. If you have any problems with the product, please email us and we will serve you wholeheartedly. Package included 24 x spacers.
Check Stock

HAMMOND SDA412 BREATHER KIT

  • Price For: Each Enclosure Material: Polycarbonate Body Color: Beige External Width - Imperial: 2.6" External Width - Metric: 66.04mm External Depth - Imperial: 1.2" External Depth - Metric: 30mm Kit Contents: Pressure Compensation Plugs RoHS Compliant: Yes.
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
  • Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year....
Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

  • 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
  • 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..
Check Stock

GuaShaco Jade Gua Sha Comb For Hair Scalp - Chinese Scalp Acupuncture

  • Hair and Scalp Care - Hair and scalp care is as important and vital as skincare. Use this jade comb with easy DIY steps to enhance overall scalp....
  • How to use - Simply press the jade comb on your scalp and run it through the hair in a constant direction to massage. You can use it along with small....
  • Embedded In TCM, Made With Love - Use our Jade Gua Sha Scalp Comb to relief stress and tension to help in migraine/headache. Deep scalp guasha also....
  • From Imperial Deluxe Kit - This individual Jade Comb is one of the most popular jade tools from our Imperial Jade Deluxe Kit. Now available to get it....
  • Guaranteed Authenticity - Every Jade Gua Sha Scalp Comb is made from genuine Xiu Yan Jade. All our jade tools are certified in authenticity..
Check Stock

Kids Maple Tree Tapping Kit - Taps & Tubes Kit - Fun and Educational Maple Sugaring Kit

  • Our Kids Maple Tapping Taps and Tubes Kit comes complete with a Children's book, Kid's Guide to Maple Tapping, filled with photos and fun activities!.
  • Kit specially designed children. Some adult supervision required.
  • Everything your junior sugarmaker needs to become a real Maple syrup maker.
  • Educational and fun. Protes a healthy back to nature activity for children.
  • Kids learn while they are having fun. A great family or kids group activity..
Check Stock

X-DREE Replacement Brass Tone 14mmx10mmx5mm Self Tapping Threaded Inserts 2Pcs(Reemplazo de tono de latón 14mmx10mmx5mm Inserciones roscadas autorroscantes 2 piezas

  • [50Pcs M3 M8 Self Tapping Thread Inserts Set]: There are 50Pcs stainless steel inner threads, including M3, M5, M6, M7, M8, M9, M10 M11 and M12, could meet your different needs in your repair work.
  • [Self Tapping Thread Inserts]: These thread inserts have the self tapping capability, which is easy to use. You can directly use the installation tool to screw it into a specific hole without pre tapping.
  • [Organzier Box for Easy Storage & Use]: Our screw repair sleeve assortment Kit is equipped with a plastic storage box, which is small in size and easy to carry. There are small compartments in the box, which allows you to sort and store thread reinforce repair tools in a more organized way. And it also makes it easier and faster for you to identify and access the screws.
  • [Sturdy Stainless Steel]: Our screw sleeve Assortment kit is made of stainless steel, which has good rust and corrosion resistance. The high quality materials make these thread inserts durable and not easy to deform, break or slip.
  • [Wide Application]: The stainless steel inner thread set could be us....
Check Stock