Top Taurus Vs Glock 43

Blackhawk to Safariland Cross Platform Adapter

  • 【Gun Holster With Premium Matrial】 The concealed holster is made of durable and sturdy 1000D nylon. The holster for men/women features resistant hardware buttons and TPU elastic cord. The 2.15" metal clip fits up to 2 inch wide belt..
  • 【Please Cut the Thread to Fit in Various Types】The concealed carry pistol holster fits Glock(36, 39, 43X MOS), Ruger EC9s and LC9s, Taurus(G2c, G2s, G3), Walther(PPK/s, PPS, PPQ 22), Springfield(XD-9, XD-40), Sig Sauer(P938, P238), SCCY(CPX-1, 2) and Similar one..
  • 【Right Hand and Left Hand Use】 The gun holster is made for right and left hand. There is a place for the clip on either side. You could wear it according to personal habits..
  • 【Flexible Carry Concealed Options】The Vacod universal holsters is versatile and has different carry options, inside the waistband, outside the waistband, on hip, behind hip, cross draw, ect..
  • 【Please Note】The Following Model May Not Fit in This Holster: Beretta 9mm, Bull Pup 9mm, Browning Buckmark, CCP8b2, FN57, Glock19,23,26,33, H&K P30, M&P Shield 9mm, S&W 9mm, S&W M&P sheild 380EZ, Taurus 9mm, Taurus Pt 111 g2, Walther PK380, 9mm FN.
  • 【Attention】Gun attachments like laser sight and flashlight are not recommeded to use with our holster..
Check Stock

Kingslayer

  • ...or Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 ....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • ...y rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
  • The footprint of this plate is NOT compatible with other footprints. This plate....
Check Stock

Bulldog Cases Black Molded Leather Belt Slide Holster (Large)

  • 【Gun Holster With Premium Matrial】The concealed holster is made of durable and sturdy 600 D nylon. The holster for men/women features resistant hardware buttons and TPU elastic cord. The 2.15" metal clip fits up to 2 inch wide belt..
  • 【Please Cut the Thread to Fit in Various Types】The concealed carry pistol holster fits Glock(36, 39, 43X MOS), Ruger EC9s and LC9s, Taurus(G2c, G2s, G3), Walther(PPK/s, PPS, PPQ 22), Springfield(XD-9, XD-40), Sig Sauer(P938, P238), SCCY(CPX-1, 2) and Similar one..
  • 【Right Hand and Left Hand Use】 The gun holster is made for right and left hand. There is a place for the clip on either side. You could wear it according to personal habits..
  • 【Flexible Carry Concealed Options】The Vacod universal holsters is versatile and has different carry options, inside the waistband, outside the waistband, on hip, behind hip, cross draw, ect..
  • 【Please Note】The Following Model May Not Fit in This Holster: Beretta 9mm, Bull Pup 9mm, Browning Buckmark, CCP8b2, FN57, Glock19,23,26,33, H&K P30, M&P Shield 9mm, S&W 9mm, S&W M&P sheild 380EZ, Taurus 9mm, Taurus Pt 111 g2, Walther PK380, 9mm FN..
  • 【Attention】Gun attachments like laser sight and flashlight are not recommeded to use with our holster..
Check Stock

Kingslayer [Blu-ray]

  • ...or Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 ....
Check Stock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • ...ate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not ....
Check Stock

DIAMOND D OUTDOORS Denali Chest Holster - Revolver 6 1/2\

  • This handguns holster is designed to be worn inside or outside the waistband for concealed carry.The retention strap is easy to open so you can draw the firearm quickly and effectively,convenient for self-defense..
  • Holster constructed by 1000D nylon,light and durable,it will prevent rubbing your pistol,also,it is breathable..
  • The concealed carry pistol holster fits Glock(36, 39, 43X MOS), Ruger EC9s and LC9s, Taurus(G2c, G2s, G3), Walther(PPK/s, PPS, PPQ 22), Springfield(XD-9, XD-40), Sig Sauer(P938, P238), SCCY(CPX-1, 2) and Similar one..
  • The metal clip of the holster is strong and stable,so you can walk even run with this IWB holster,no any movement of your firearm.This holster is made for right and left hand.(There is a place for the metal clip on either side. Can be adjusted according to personal habits)..
  • This gun holster features a 2.15-inch metal clip that can be installed to any 2-inch wide belt. An extra bag,can be used for a extra magazine or a folding knife..
  • The Following Model May Not Fit in This Holster: Beretta 9mm, Bull Pup 9mm, Browning Buckmark, CCP8b2, FN57, Glock19,23,26,33, H&K P30, M&P Shield 9mm, S&W 9mm, S&W M&P sheild 380EZ, Taurus 9mm, Taurus Pt 111 g2, Walther PK380, 9mm FN..
Check Stock

Concealed Carry Holster IWB OWB with Magazine Slot for Right and Left Hand Interchangeable Metal Clip Universal Holster

  • Ambidextrous design holds your handgun close against your body and can be rotated for left or right hand draw. Left or right to fit your carry....
  • 2.15 inch metal clip, fit up to 2 inch wide belt. You can put the holster whatever angle, inside or outside of pants. It will very easy to pulled out,....
  • Concealed Carry Holster, Universal Holster, Inside The Waistband Bundle, Holster for Female/Male Fits S&W, M&P Shield/Glock 23,36,39,42,43/Ruger LC 9,....
  • Perfectly fits Glock 42, Taurus 22, Ruger 380, CPX-2 9mm, P365 XL, S&W, Sig Sauer P365 & SP2022, Beretta, Springfield 911.380, Taurus, Walther PPK....
  • By removing a line of stitches, the holster size is enlarged. The holster not only is suitable for subcompact and compact but also suitable for medium....
Check Stock

VICTOPTICS 9mm 10mm .40 .45 Single & Double Stack Magazine Pouch,Universal Mag Holder | Polymer Paddle Holster | Adjustable Size & Cant | Ambidextrous | Outside Waistband | Black

  • Universal Version: This double magazine holster fits most common pistol models with 9mm/10mm/.40 Single stack/Double stack magazines - Glock17/19/19x/22/23/24/26/27/31/32/34/35/37/38/39/41/43/43x/45 Gen 1/2/3/4/5.
  • CZ P-07, P-09, P-10 C. For more models, please check the FIT mags list. (Note: Doesn't fit Glock 21 .45 magazine).
  • Swift Reloads: With a 360° angle adjustment paddle and open-top design, it allows you to access this double mag holder easily. And the paddle allows you to quickly put this double magazine carrier on/off as needed and is EXTREMELY secure..
  • Resizable with Tool-free: This feature allows this double magazine pouch to fit many 9mm/10mm/.40/.45 Double Stack & Single Stack magazines for Glock/Sig sauer/S&W/Beretta/Taurus/H&K Pistol Mags, while keeping your mags locked and tight with no movement. To make this simple adjustment, tighten or loosen the screws with your hand on the middle of this double magazine holster..
  • Set the retention level of your choosing: This universal magazine holder allows you to set your desired retention tool-free..
Check Stock

Gun Holster Buy 1 GET 3 Free Hip Shoulder Concealed Ankle FITS Ruger LCP 380 LCP 380 II KELTEC P3AT P32 Phoenix HP22 Cobra CA 380 AMT380 Taurus Spectrum PT22 PT25 Beretta Tomcat NA Guardian 32 1

  • MOST VALUABLE HOLSTER COMBO: Package include: Belly band holster + ankle holster (as secondary concealed carry), the most cost effective option for concealed carry.
  • ONE SIZE FITS MOST：Belly band & Ankle holster both 5" width, belly band size fits up to 45" and ankle holster 16" length fits most ankle size.
  • QUALITY MADE: Both made of soft knit, breathable elastic material, Ankle holster upgraded with EXTRA PADDING for added comfort. Both has retention hook & loop strap to keep pistol of choice in place.
  • AMBIDEXTROUS DESIGN: Belly band can be rotated for left or right hand draw, Put ankle holster inside left leg for Right hand model.
  • VERSATILE FIT: Belly band holster fit Glock 19, 17, 22, 23, 26, 42, 43, P238, smith and wesson,Springfield, Taurus, Kimber, Rock Island, Bersa, Kel Tec, Walther, etc. Ankle holster fits Snub nose Revolvers, Glock 26, Glock 27, Glock 30, Glock 42, Glock 43, S&W Shield, Sig P239, etc.
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • .... Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy..
Check Stock