Top Tb Msata Ssd 2

Cablecc Mini PCI-E mSATA to USB 2.0 External SSD PCBA Conveter Adapter Pen Driver Card Without Case

  • Create your own blazing fast external SSD with this USB 2.0 mSATA SSD..
  • An USB 2.0 external SSD offers incredible performance far beyond that of a USB 2.0 flash drive..
  • Features and Specifications. Fits 50mm standard size mSATA drives.
  • Max out the USB 2.0 bus, real world speeds can top 480Mbps. Small and portable.
  • Note: This adapter is only compatible with MSATA connector..
Check Stock

Ciglow Hard Disk Enclosure,mSATA SSD to 2.5-Inch 44-Pin IDE Adapter with Shell,Stable Performance,Laptop PATA/IDE Hard Drive Shell Adapter (Black)

  • APPLICABILITY: This product only supports mSATA SSD from 3x5cm or 3x7cm to 2.5-inch PATA/IDE..
  • ACCURATE TRANSMISSION: mSATA SSD to 2.5-inch PATA/IDE interface. It perfectly supports the SATA3 transmission standard. The adapter card only changes the interface form of the solid state drive, and does not change any performance of your hard disk. What is your original hard disk parameter, and the adapter card is added, the output interface performance will not change..
  • HEAT DISSIPATION FUNCTION: The original intention of MSATA design is to be used in a confined environment. It must be resistant to high temperature, so there is no need to worry about this problem. Moreover, the space in the adapter box is large enough, and the air convection problem is considered when designing, so there is no worry about heat dissipation. necessary!.
  • STABLE PERFORMANCE: 100% brand new and high quality. The performance of this product is stable. Only support MSATA defined SSD in MINI PCIE interface..
  • CONVENIENT AND PRACTICAL: Mini PCI-e mSATA SSD to IDE 2.5-inch 44pin adapter..
Check Stock

USB3.0 to MSATA mini-SATA 30mm x 50mm Full Size SSD Portable Hard Disk Driver External Enclosure

  • There are six types of interface definition,they look exactly the same,so please be sure to distinguish your solid state drive's interface definition..
  • A: mSATA Solid State Drive,using SATA protocol.
  • B: SATA MINI PCIE Solid State Drive,its nature is SATA interface,but the pin definition is different compared with mSATA solid State Drive.
  • C: PATA MINI PCIE Solid State Drive, its nature is IDE interface.
  • Connects mSATA SSD safely to computer via USB port. * Supports 30mm x 50mm mSATA SSD to USB 3.0 interface..
  • Supports Plug & Play and Hot-Swapping (SSD is not include)..
  • Note: If your SSD is fist time use, should be install to the Converter, then setting Management device to reformatting the SSD, only in this way can SSD be recognized by computers..
Check Stock

GODSHARK 2.5' Inch IDE to SATA Adapter, Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port

  • Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop.
  • 50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case..
  • This adapter using JM20330 Serial ATA Bridge Chip..
Check Stock

Geekworm for Raspberry Pi 4, X857 V2.0 mSATA SSD Expansion Board + X735 V3.0 Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board (Not Include Raspberry Pi 4)

  • √[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
  • √Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
Check Stock

Micro SATA Cables USB 3.0 mSATA SSD Adapter as USB Disk Driver

  • USB 3.0 mini pci-e mSATA SSD adapter card that can be used a USB 3.0 Drive. It is for mSATA SSDs with the Intel pin out.
  • Authentic only if sold by Micro SATA Cables..
  • Categories: Drive Adapters, Drive Converters, MSATA Adapters, MSATA Adapters, MSATA Adapters / mini PCI-E, USB 2.0 & 3.0 Adapters, USB 2.0 & 3.0....
Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
  • for the T300 metal case, refer to ASIN: B07W7CNSR8.
  • for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
  • Intelligent power management - Automatic powering off when system shutdown.
Check Stock

SABRENT mSATA to USB 3.0 / 2.5-Inch SATA III Aluminum Enclosure Adapter EC-MSMU

  • This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds..
  • Exclusively designed for M.2 NGFF SATA SSD B or B+M Key..
  • 1.SATA Interface - 2.USB 3.0 - 3.MSATA SSD Slot - 4.MSATA SSD Screw Holes.
Check Stock

Chenyang Slim Type Mini PCI-E mSATA SSD to 2.5' SATA 3.0 22pin HDD Adapter Hard Disk PCBA

  • ➤ M.2 NVME SSD to PCIe 3.0 x4 channel for Key-M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ M.2 SATA-based SSD to SATA channel for Key-B/B+M M.2 SSD (form factors 2230, 2242, 2260,2280).
  • ➤ mSATA to SATA channel for 30x50mm mSATA SSD.
  • ➤ With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation,Including 2 Aluminum Heatsink.
  • ➤ Including both regular size and low-profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation required.
Check Stock

ORICO M.2 SATA B+M/B Key SSD Enclosure USB 3.1 Type C 5Gbps External Solid State Enclosure Adapter for 2280/2260/2242/2230 M.2 NGFF SSD 4TB Max, NOT Supoort PCIe NVMe/AHCI M.2 SSD -M2PF

  • Up to 5Gbps with UASP: ORICO M.2 NGFF ssd external case adopts control chip, with UASP acceleration protocol and USB3.1 Type-C output interface, reach up to 440+ MB/S write/read speed matched with your M.2 SATA SSD..
  • NGFF SSD Enclosure: Compatible with most M.2 SSD SATA based 2280/2260/2242/2230 B Key M.2 NGFF SSD up to 2TB such as Samsung 860 EVO / 850 EVO M.2 SATA III SSD, WD Green M.2 2280, etc..
  • Compatibility: Supports Window / Mac / Linux . This external hard drive case is suitable for connecting PC, smart phone, notebook computer, smart TV, smart router, PS4 and other devices. Plug and play, no driver needed..
  • Excellent Heat Dissipation: The copper bars with holes on the PCBA board rapidly radiating heat from internal SSD to external Aluminum case. The external case with heat exchange fin, for better heat dissipation under high-speed transmission..
  • More details: The LED indicator on nvme ssd enclosure shows working status of SSD. The lightweight and compact size making it easy to carry with you while on the go. NOTE: 【DOES NOT SUPPORT NVMe PCIe BASED M-Key and M&B-Key M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.】.
Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

  • ...WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
  • √ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
  • √ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, r....
Check Stock

StarTech.com 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card w/ 2 mSATA Slots & HyperDuo SSD Tiering - PCIe SATA 3 Controller (PEXMSATA3422)

  • Combine SSD performance w/ HDD capacity & create a HyperDuo array with 2 mSATA + 2 SATA drives through your computers PCIe slot.
  • 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card w/ 2 mSATA Slots & HyperDuo SSD Tiering / mSATA Adapter.
Check Stock