Top Teflon Bar Rod Sheet

FoRapid PTFE Teflon Sheet, Non-Stick Oven Liners, Barbecue Grill Mat Baking Sheet Reusable Washable - Use Up to 500℉ Craft Mat for Baking Cooking BBQ Grilling Roasting 16x24"/40x60cm 3 Pack

  • Versatile Teflon Sheet - Work as nonstick oven liners, barbecue grill mat, baking mat, and more. PTFE sheet is ideal for baking and roasting, etc. Also used as an extra layer for ironing clothes, lamination press transfer paper, craft mat, ironing sheet, etc..
  • Use at Up to 500ºF - Can be continuously used in -40ºC - 230ºC environment, suitable for a variety of kitchen wares, perfect for any grill, cooking, drying, dehydrating, roasting, etc..
  • Water-Resistant & Easy to Clean - Coated with PTFE, the non-stick baking sheet is very smooth and easy to clean. Just peel or wipe off messy materials when cooled/solidified. Dishwasher-friendly and quick dry..
  • Reusable, Zero Waste Solution to Baking Paper/Aluminum Foil - Made from super thick 0.11mm-0.13mm fiberglass paper, the heat transfer paper are tear resistant, durable, can be used for many times on both sides and last a long time. Note: Do not crumple or crease the craft sheet..
  • Cut to Any Size for Convenient Use – The craft sheet with Teflon coating measures 15.75 x 23.62"/40 x 60cm, keeps your work space clean. Trim the heat press paper with scissors to any size/shape for all your crafting needs. Your creativity is the limit! Package includes 3 Teflon Sheets..
Check Stock

Rheem AP12938 Anode Rod 0.625-Inch Diameter by 42-Inch long Aluminum by Rheem

  • ABOUT FLUID’S MAGNESIUM ANODE ROD KIT is the fastest and best choice to prevent your water heater from dissolving itself from the inside out! With....
  • FITS: Almost all water heaters including.
  • Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾" NPT Anode Rod....
  • LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-By-Step instructions. Our Licensed Plumbers and Instructors have decades of experience. They....
  • NO LEAKS: You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon....
  • WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four....
Check Stock

Heat Press Mat with Teflon Sheet for Cricut Easypress- 12x12inch, Heat Transfer Insulation Craft Pad for 2/EasyPress,Vinyl HTV Ironing mats

  • 【Perfect for Heat Press Projects】heat press mat is suitable for Cricut Easypress 2/Cricut Easypress and all kinds heat press machine..
  • 【Teflon Sheet】Includes a teflon sheet for Heat Press Reusable is easily wipe off messy materials like wipe glue, wax or clay..
  • 【Good Design】Provides Smooth And Even Surface, Made of non-stick fire retardant to avoid burns and protect the workbench very well..
  • 【Allows High Temperature】The temperature upto 430°F on the front of the Mat, The maximum temperature resistance of Teflon Sheets is 600°F. Very safe to use..
  • 【Wide Application】Ideal for heat press transfer projects like T-shirts, banners, sweatshirts, blankets, and more..
Check Stock

Toolly 8 Pack Magnetic Stirrer - Stir Bars Mixer, PTFE Stiring Rod : 7 Shapes + Magnetic Retriever

  • ➤It is used to stir a liquid or solution in biological, chemical, medical and research laboratory applications..
  • ➤More turbulence and a stronger vortex by stir bars in various shapes: 7Pcs stir bars of different sizes and shapes.
  • 1pc Recycling rod for stir bar retrieval..
  • ➤Suitable for mixing various liquids: Used in most chemicals and solvents, showing inert, strong acid and alkali resistance, water and a variety of organic solvents.Corrosion resistance, no adhesion and non-toxic..
  • ➤Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning. Built-in pivot ring helps reduce vibration and wear during stirring..
  • ➤High & low temperature resistance: Maintain a good mechanical toughness between 196℃ ~250℃. Even if the temperature dropped to -196℃, it can also maintain a 5% elongation..
Check Stock

Adecco LLC Teflon Sheet for Heat Press, Nonstick Oven Liners, Heat Resistant Craft Mat Transfer Sheet 3 Pack(16 x 12 Inch)

  • Single non-stick heat press teflon sheet: SIZE:16 x 12 inch.
  • Simple and easy to clean: just peel or wipe paint, glue, wax, clay when cooled or solidified.
  • Can be applied in various craft projects: including paint, clay, wax, stamping, inking, ironing and baking.
  • High Temperature Resistance: Heat resistance up to 500℉,This teflon sheet great for hot glue,baking,iron,heat press transfers,or anywhere need resisting high temperature..
  • QUALITY GUARANTEED: We offer 90-day Products Exchange and Money Back Guarantee. If you have any problem,please feel free to contact us!.
Check Stock

Weston Vacuum Sealer Bags Roll (Pack of 3), 11-Inchx18-Feet, Clear

  • Heavy duty construction and 935 watts of power make this vacuum sealer powerful.
  • Double piston pump seal bar finishes the job fast.
  • It’s the perfect tool for preserving your prized catch or preparing your garden vegetables for freezing.
  • Extra wide, 5 millimeters seal bar creates a solid, dependable seal every time.
  • Allows control over the amount of vacuum pressure for soft delicate foods.
  • Product 2: One (10 mm) Teflon Tape for the vacuum sealer lid.
  • Product 2: One (15 mm) Teflon Tape for the seal bar.
  • Product 2: Replacement parts for Weston PRO-2100 (65-0101) and PRO-2300 (65-0201) Vacuum Sealers.
Check Stock

About Fluid | MAGNESIUM Flexible Anode Rod, INCLUDES 1-1/16" Hex Socket, Complete Kit for Water Heaters | Teflon Tape | Hi Temp Brass Cap | Easy-To-Follow, Step-By-Step Instructions | 44 Inches Long.

  • KIT INCLUDES! (1) HEX-TYPE ANODE ROD, most water heaters use this kit’s ¾ NPT Anode Rod (2) BRASS CAP, just in case you don’t trust your drain valve to shut completely (3) HARD-TO-FIND 1-1/16”, 6-POINT DEEP-WELL CHROME VANADIUM SOCKET, fits both your old and your new anode (4) PIPE SEALING TEFLON TAPE, with plenty left over for the next time you check your anode’s condition (5) INSTRUCTIONS. All you provide is a ½ Inch Ratchet or Breaker Bar, a friend and your favorite beverage! (not included)..
  • WATER HEATERS BURST AND YOU CAN PREVENT THIS! I began my plumbing apprenticeship in the 90s. The plumbers I worked for would say “they must place a self-destructing device in water heaters, timed to go off just after the warranty is over,” then shake their heads as we dragged a 7-year-old, rusty-sludge-spewing water heater away to the nearest recycling center. The plumbers weren’t entirely wrong, they just got it backwards. Next>.
  • WHAT I’VE LEARNED: Manufactures install an anode rod in every water heater at the factory because they know their tanks will quickly rust and fail without one. The anode rod takes the destruction from a chemical process called electrolysis so the tank doesn’t have to. If the water heater....
Check Stock

Gábor Presser - Anna Adamis - Harmincéves Vagyok - Pepita - SLPX 17494

  • ✅ Heat press 12x10, adapts the latest teflon coated heating plate, protect your vinyl and clothes while working and harmless to them. The teflon....
  • ✅ Heat press machine, intelligent design to ensure your safety. LED intelligent digital controller, you can set the temperature ( Fahrenheit and....
  • ✅ 360 degree swing away, when changing clothes or hats, move the heating plate to the side or back to avoid accidental contact and burn. Temperature....
  • ✅ Shirt printing ​machine can be used for t-shirts, garments, bags, mouse mats, jigsaw puzzles, ceramic tiles and other flat surfaced items.....
  • ✅ Shirt press contains all the necessary accessories: 1 x fully-assembled machine, 2 x Teflon sheet, 1 x User Manual. Please Note: T-shirts, cups....
Check Stock

Selizo 10 Pack PTFE Teflon Sheet for Heat Press 16" x 24" Non Stick Heat Resistant Craft Mat

  • PACKAGE CONTENT: The Teflon heat press sheet comes with 10 pack Teflon sheets that are ideal for heat presses.
  • HIGH TEMPERATURE RESISTANCE & WATER REPELLENT: These Teflon heat press sheets are made of glass fiber that are temperature resistant and water repellent. Insulation effect can reach 600 ° F and they also can be reused up to 1000 times.
  • EASY TO CLEAN: The non-stick Teflon heat press mats can be utilized many times on both sides, the non-stick attribute made them easy to clean. You can just wipe paint, glue, wax, baking clay etc. when finished.
  • TRIM FOR CONVENIENT USE: The craft sheets are approx. 16” x 20” in size. You can cut them into any shapes and any size to use.
  • MULTIFUNCTIONAL FOR CRAFTS: These PTFE craft mat sheets can serve as barbecue grill mats, non-stick oven liners, ironing protectors, heat press transfers, and also can be used in painting and other crafting projects..
Check Stock

Belltech 9148 Nitro Drop 2 Shock Set

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

Ruler Metal Straight Edge Ruler Stainless Steel Ruler 6 Inch 12 Inch 16 Inch Ruler Set Rulers Bulk Set of 3

  • 【GOOD QUALITY Tshirt Alignment Tool 】T-shirt ruler guide for vinyl set contains 4 different sizes rulers, 2 Rolls Heat Resistant Tape and 3 Packs PTFE Teflon Sheet Included. Help you to make alignments and save time on center your designs..
  • 【Enjoy DIY Fun】Reart T-shirt Alignment Tool will help align designs to shirts and is helpful for getting prints aligned perfect every time! Don't have to worry about things not being centered anymore!Numbers and markers are clearly on the ruler that is easy to read against any shirt color..
  • 【Heat Resistant Tape】Heat Tape perfect for protecting sensitive printed circuit board (PCB) components such as gold fingers when wave soldering, This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press..
  • 【3 Pack PTFE Teflon Sheet】Heat Resistance & Non Stick- Heat press transfer sheet allows high temperature resistance up to 600 °degrees, protect your working surface,perfect for heat press..
  • 【100% SATISFACTION】Please contact us for any questions. We will reply....
Check Stock

SS SHOVAN PTFE Teflon Sheet for Heat Press Transfer Sheet Non Stick 16 x 20" Heat Resistant Craft Mat, 5 Pack

  • NON-STICK TEFLON HEAT TRANSFER PAPER — 5 Pack Non-stick teflon Heat Transfer Paper Protects your vinyl, clothes and iron while you iron on HTV with our professional grade..
  • TEMPERATURE RESISTANT & WATER REPELLENT — Heat resistance up to 600 degrees. Protect your working surface ,Perfect for Heat Press!.
  • REUSABLE & DURABLE EASY TO CLEAN AND TRIM FOR CONVENIENT USE — Craft sheet can be utilized many times both sides, Just wipe paint, glue, wax, baking clay and more when finished..
  • MULTI-PURPOSE CRAFT ITEM — PTFE sheet can serving as barbecue grill mat, nonstick oven liners, iron clothes protector, heat press transfers, paints and other crafting projects..
  • QUALITY GUARANTEED! — Promise 90-day Products Exchange and Money Back Guarantee..
Check Stock