Top Teflon Oil Seals

Bonbo Turbine & Stator Shaft Teflon Seal Installer/Resizer Transmission Tool J-36418-C & ST-1503 for GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70E and 4L70L

  • J-36418-C Turbine Shaft Teflon Seal Installer/Resizer – For GM 700-R4, 4L60, 4L60-E, 4L65E, 4L70L 1982 - UP transmissions..
  • 1503 Stator Shaft Teflon Seal Installer/Resizer – Used on GM 700-R4, 4L60, 4L60-E, 4L65E and 4L70E transmissions..
  • Great Function – This tool kit will effectively protect the Stator or Turbine Shaft Teflon seals from damage, tear and distortion during installation..
  • Direct Replacement – 1503 Stator Shaft Teflon Seal Installer/Resizer is alternative to Atec Trans-Tool T-1503, #39SS both in function and performance. J-36418-C Turbine Shaft Teflon Seal Installer/Resizer is a perfect substitution for Kent-Moore J-36418-C, Atec Trans-Tool T-1574, T-1574-Long and T-1574-M..
  • Superior Quality – Made of premium and wear resistance aluminum alloy, sturdy, impact resistance and anti-corrosion for much longer service time. Won't easily crack or break like the cheap plastic ones..
Check Stock

QMAXX Black Diamond 8 oz Turret Top Lubricant

  • MicroLubrol ATD lubricant is a 100% pure PFPE oil excellent for reducing squeaks, rattles, and wind noise in convertibles and other automotive parts..
  • Recommended for retractable convertible roof top rubber seals and sliding convertible roof top rubber seals..
  • Excellent for CSC (Coupe/Sunroof/Convertible) retractable/sliding roofs, sunroof, moonroof rubber seals and door rubber seals..
  • Also recommended for power window rubber seals, hatch and trunk rubber seals..
  • Same type of PFPE oil as the popular 105 PFPE oil and VW "Special Lubricant"..
Check Stock

LS Rear Main Seal Alignment Tool,Front Cover Alignment Tools & Oil Pan Front Cover Alignment Tool Kit for GM LS Engine 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92

  • FITMENT - The front rear cover and oil pan alignment tool kit Compatible With GM LS engines 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9....
  • DESIGN - This tool mimics the oil pan thus providing critical alignment of the oil pan and front cover. Designed to be used in conjunction with the....
  • INSTRUCTIONS - LS engines utilize front and rear seals with Teflon inner sealing lips. For proper seal function and longevity it is critical that the....
  • QUALITY - Machined from Billet aluminum with great durability and tight tolerances for a perfect alignment. Perfect for engine builders and mechanic....
  • INCLUDES - (1)Oil Pan Front Cover Alignment Tool(1)Front Cover Billet Alignment Tool(1)Rear Cover Billet Alignment Tool.
Check Stock

Fork and Dust Seal Kit for Kawasaki Ninja 650R 2006-2011

  • Dual-lip oil seal design reduces friction and ensures better sealing..
  • High quality dust seals prevent dirt from getting to the oil seal..
  • These seals are designed to outlast OEM seals..
  • This kit includes 2 fork seals and 2 dust seals..
Check Stock

One Mfg Bike Dropper Post Lubricating Oil 2oz - Cleans and Lubricates Seals

  • ONE MFG'S DROpPER POST LUBRICATING OIL IS THE BEST WAY TO CARE FOR YOUR POST - High viscosity, waterproof, grime repellent formula lubricates post and seals to reduce stiction and effort needed to drop the post, and helps clean by pulling dirt from the seals..
  • IMPROVES PERFORMANCE IN MINUTES - One Mfg Dropper Post Oil cleans seals quickly and easily, for a difference you can immediately feel..
  • MADE WITH NON-TOXIC, NON-HAZARDOUS OILS - Clear, odorless, non-sticky oil safely repels dirt and water, and will not harm dropper post seals, internals or coatings..
  • EASY APPLICATION - Clean any loose dirt from post. Apply a small amount of One Mfg's Dropper Post Oil to the seal of the sliding post.  Compress the post all the way down and back up. Wipe carefully with a CLEAN rag or paper towel. Repeat until no dirt is coming off the seals. Dry-off and excess oil and you're done..
  • MADE IN THE USA - Developed, tested and manufactured in the great Pacific Northwest..
Check Stock

Guardian G1643 ABS Plastic Emergency Shower, Horizontal Mounted

  • Application: Emergency shower for horizontal mounting.
  • Shower Head: 10" diameter orange ABS plastic.
  • Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29” stainless steel pull rod.
Check Stock

Choosing the Right Turbine HVLP System

  • Made For SprayTech CS5100, SprayTech CS8100, SprayTech CS9100 & CS9900 HVLP units..
  • 2 Stage Trigger (Air and Material). Patented dual-pivot trigger (reduced pull and less fatigue)..
  • Solvent proof Teflon Seals. Comes standard with a #3 Proset (needle set)..
  • Optional air inlets (provides non-bleed to bleed conversion)..
Check Stock

Edelmann 70004 Replacement Teflon Seals for Type II Power Steering Systems - 25 Pack

  • For use on Type II power steering fittings.
  • Seal has a .495 inch I.D. and a .040 inch width.
  • soften seal in warm water to ease installation.
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Teflon Sheet for Heat Press Transfer Sheet 18 Pack Non Stick 12'x16' Heat Transfer Paper Heat Resistant Craft Mat

  • Quantity Size:18 pieces of 12''x16'' PTFE board. Weight:About 17 g.
  • High Temperature Resistance:Heat press teflon sheet is made of high temperature and waterproof glass fiber,allows high temperature resistance up to 518℉degrees.
  • Water Repellent:Our PTFE teflon sheets are easy to clean, wipe with wet cloth only, rather than repeat like washing clothes, but do not prevent oil, alcohol, acrylic paint, etc., will penetrate.
  • Reusable and Non-stick:Our 18 packs teflon sheet for heat press reusable,non-stick treatment on surface,easy to use.
  • Multi-purpose:The teflon sheet for heat press can be used as barbecue pad, non-stick oven inner gallbladder, ironing protector, hot pressing transfer printing, ironing board, very suitable for baking, barbecue, cooking, barbecue, baking, pressing, ironing, painting and other technical items.
Check Stock

BERYA Heat Press Mat-Teflon Heat-Resistant Pad for Heat Press Machines and Craft Vinyl Ironing Projects

  • 5 Layers Technology Mat-It has Teflon heat-resistant cover,flame retardant felt,foil membrane,silicone foam inner and protective bottom barrier seals total 5 layers together to make sure a good quality for lasting use..
  • Heat-resistant-The top layer is made of Teflon,heat-resistant and providing thermal conductivity and even heat distribution.The back layer uses protective bottom barrier seal to protect the surface underneath from heat..
  • Best Protection-The inside 3 layers make for even temperatures over the surface consistently.The flame retardant felt wicks moisture to deliver clean, dry heat.The foil membrane reflects heat and prevents moisture vapor transfer, while the silicone foam provides insulation and shields your surface from damaging heat..
  • Provide A Smooth Surface- A large area that's just firm enough to provide a smooth surface and even contact patch for the press. No more using towels or fading your kitchen table..
Check Stock

Cowin Brewing 1/2 3-Way Stainless Steel 304 Ball Valve - L Port With Mounting Pad 1000PSI NPT

  • ISO-5211 Mounting pad for actuator, also with handle for manual.
  • Suitable for full range of liquids and gas.
Check Stock