Top Telemetry Radio Module

FOXWELL NT530 for BMW Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands – Free Online Updates. One year warranty..
Check Stock

FOXWELL NT530 for Volvo Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands - Free Online Updates. One year warranty..
Check Stock

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check Stock

Radiolink 2.4Ghz R7FG 7 Channels Gyro Receiver with Voltage Telemetry Long Range Control, Water-splash RX for RC Crawler Car Boat Radio Controller System RC4GS v2/RC6GS v2/RC4GS v3/RC6GS v3

  • Excellent Anti-interference: With pseudo random FHSS algorithm, which makes R7FG with excellent anti-interference ability, control distance up to 1900 feet (600 meters)..
  • Real-time Telemetry: telemetry feature can provide real-time vital information like vehicle's battery voltage, RSSI signal and more, avoiding the battery over-discharge and damage..
  • Integrated Gyro: built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars..
  • Push to Bind: No need bind plug and any radio setting, only press bind button for 1 second after power up radio and receiver. High resolution ratio of 4096, stable signal and fast response..
  • Waterproof: IPX4 can be protect receiver from water splash. Also with anti-polarity protection, not damage the receiver even you insert wrong polarity. 3-12v DC support high voltage servo..
Check Stock

Drone Racing League: 2017 eSports Tryouts

  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
Check Stock

Honeywell LYNX Touch 5210 4.3\ All-in-One Wireless Home and Business Alarm Control System

  • WiFi & ZWAVE Compatible (SOLD SEPARATELY - NOT INCLUDED).
  • L5210 All-In-One Home and Business Control System.
  • Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    Up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks – Jammed locks reported to Honeywell Total Connect Remote Services 40 devices such as lights, switches and lamp modules 20 scenes 20 rules or event-based actions 20 schedules or time-based actions Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices.
  • Honeywell 3GL Communications GSM radio (SOLD SEPARATELY - NOT INCLUDED) – protocol supports AT&T and Rogers networks ADEMCO Contact ID Reporting (four or ten digit account numbers) SIA Format Reporting Internet central station communication with L5100-WIFI or ILP5 module GSM cellular central station communication with internal GSM radio Selection for primary communication path when using dual paths Touch activated radio registration GSM....
Check Stock

AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator

  • ... Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
  • [Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
  • In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
  • [Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
  • [Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
  • SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
  • [Feature 2] SHARI PiHat uses a single circuit board which contains installed surface mount (SMD) parts as well as ....
Check Stock

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone

  • Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight.
  • Supports redundancy function Support telemetry and Smart Port enabled.
  • US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail....
Check Stock

Traxxas T-Maxx 3.3: Powered 4WD Maxx Monster Truck (1/10 Scale), Red

  • TRX 3.3 racing engine delivers massive power and torque to all 4 wheels to conquer any terrain at speeds up to 45mph.
  • TQi 2.4GHz Transmitter with Traxxas Link wireless module, factory installed telemetry sensors, and TSM stability control.
  • Tunable, sealed front and rear differentials and auto-shifting two-speed transmission.
  • Ready-To-Drive with included NiMH receiver pack and EZ-Start battery, chargers, fuel-filler bottle, spare glow plug, and more!.
  • Extended chassis, heavy-duty chassis braces, transmission skid plate and 6.3" Maxx all-terrain tires on mirror-chrome 3.8" Hurricane wheels.
Check Stock

Traxxas T-Maxx 3.3: Powered 4WD Maxx Monster Truck (1/10 Scale), Black

  • TRX 3.3 racing engine delivers massive power and torque to all 4 wheels to conquer any terrain at speeds up to 45mph.
  • TQi 2.4GHz Transmitter with Traxxas Link wireless module, factory installed telemetry sensors, and TSM stability control.
  • Tunable, sealed front and rear differentials and auto-shifting two-speed transmission.
  • Ready-To-Drive with included NiMH receiver pack and EZ-Start battery, chargers, fuel-filler bottle, spare glow plug, and more!.
  • Extended chassis, heavy-duty chassis braces, transmission skid plate and 6.3″ Maxx all-terrain tires on mirror-chrome 3.8″ Hurricane wheels.
Check Stock

Traxxas 6533 TQi 2.4GHz Micro Receiver with Telemetry & TSM (5-channel)

  • TSM allows you to experience the power and speed of your Traxxas model by making it easier to control on slippery surfaces.
  • Braking is dramatically improved as TSM works to keep you arrow straight.
  • TSM can be fine-tuned (or turned off) for different surfaces by adjusting the multi-function knob on the TQi transmitter.
  • Five channel receiver accepts sensors to provide real-time telemetry on Traxxax Link app.
  • Receiver requires a Traxxas TQi radio with internet connectivity via the Traxxas Link mobile app.
Check Stock

FrSky 900MHz R9M 2019 Long Range Module System Compatible R9 Series (ACCST/Access)

  • ● 900MHz/868MHz working mode Compatibility: R9 series (ACCST/ACCESS).
  • ● Long range, low latency and high precision RC system Vin Voltage Range: 6.5V~13V.
  • ● 4 Optional RF power (Non-LBT Version) Vin Voltage Range: 6.5V~13V.
  • ● Telemetry mode（25mW）/non-telemetry mode（200mW / 500mW） (LBT Version).
  • ● Smart Port enabled and support telemetry data transmission Telemetry Interface: Smart Port Upgrade Interface: Smart Port.
Check Stock