Top Temperature Ball Valve

ERA SCH 80 PVC 6" COMPACT BALL VALVE (SOCKET)

  • Super easy to open & close - Much easier to operate than original valve with short T-handle. (Review from many buyers)..
  • One-piece ball valve design - There are no redundant joints to minimize water leakage, excellent industrial design..
  • Technical parameter - Withstand a working pressure of 150 PSI and a maximum temperature of 140 °F. Fits for 1" Schedule 40 PVC Pipe..
  • Ideal PVC ball valve for your project - Select a high-quality valve for your water project to reduce the cost of later maintenance..
  • Wide application scenarios - This valve is applicable to a variety of work sites, suce as swimming pools, sewage pipes, sprinkler irrigation system, agricultural irrigation system, and can work even in harsh environments..
Check Stock

1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )

  • ...ality 304 stainless steel, lead free, Safer and stronger, long lifetime. It is the ideal plug valve for high quality shut- off valves in industry or in the home and garden..
  • Suitable for a variety of media: The high-quality stainless steel ball valve is suitable for water, sea water, air, oil, and steam media with a temperature of -10 ℃~120℃.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
  • Convenient operation: This high pressure 1 inch ball valve has a comfortable operating handle, which opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
  • Widely used: Ball valves are widely used in gardens, water pumps, corner ....
Check Stock

Gralara High Pressure Washer Ball Valve Quick Connector High Pressure Resistance for Agricultural Irrigation, 1 of 4inch

  • STURDY DESIGN: Made of durable steel material, this ball valve is specifically designed for pressure washing machine hoses that need to handle high pressure ratings up to 4500 PSI and a maximum temperature of 60 degrees Celsius..
  • VERSATILE: Perfect for car wash, patio, siding, and deck cleaning jobs, this high-pressure washer valve switch makes cleaning tasks quick, easy, and efficient..
  • QUICK CONNECTOR: This high pressure washer ball valve kit comes with a 3/8" quick connector and plug for easy attachment to your sprayer, nozzles, pumps, and hoses..
  • COMPATIBILITY: The adapter's thread size is 3/8 NPT, not G 3/8 (3/8 BSP)..
  • EASY TO USE: This ball valve switch is designed for easy opening and closing, and provides tremendous leverage under high pressure..
Check Stock

Qianly Ball Valve Lightweight 4500 PSI Easy to Use and Install Professional High Pressure Washer Ball Valve for Car Wash Deck Cleaning Patio Siding, 3 of 8inch

  • EASY TO USE: This ball valve switch is designed for easy opening and closing, and provides tremendous leverage under high pressure..
  • VERSATILE: Perfect for car wash, patio, siding, and deck cleaning jobs, this high-pressure washer valve switch makes cleaning tasks quick, easy, and efficient..
  • QUICK CONNECTOR: This high pressure washer ball valve kit comes with a 3/8" quick connector and plug for easy attachment to your sprayer, nozzles, pumps, and hoses..
  • STURDY DESIGN: Made of durable steel material, this ball valve is specifically designed for pressure washing machine hoses that need to handle high pressure ratings up to 4500 PSI and a maximum temperature of 60 degrees Celsius..
  • COMPATIBILITY: The adapter's thread size is 3/8 NPT, not G 3/8 (3/8 BSP)..
Check Stock

304 Stainless Steel Balanced Float Ball Valve Tank Mount 100 Psi 1 inch NPT Male…

  • Balance pressure between piston and Valve, as well as smaller ball and shorter rod can bear high pressure..
  • Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements..
  • Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃.
  • Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" Stainless Steel Float.
  • Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.
Check Stock

QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall

  • Float valves use a rod and float ball attached to a valve shutoff lever to control.
  • Floating Ball Material: 304 Stainless Steel.
  • Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
  • This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
  • Widely used in magnetic level switch and liquid level measurements.
Check Stock

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

  • FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
  • FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
  • RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
  • DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
  • EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.
Check Stock

Float Valve for Water Tank Stainless Steel Float Ball Valve 3/4 Inch DN20 Floating Ball Valve Switch Automatic Brass Toilet Valve Float Valves for Stock Tank Pool Water Level Control (2)

  • Work Well: the metal float valve consists mainly of a curved arm and floating ball, well made and useful, nice for cutting, distributing and changing the direction of medium flow, and you can use it to control the level of water in a water tower or pool.
  • Long Service Life: this floating ball valve is made of brass and stainless steel, sturdy and solid, reliable and serviceable to use, not easy to break, deform or bend, with nice corrosion resistance, able to be applied for a long time.
  • Where to Apply: these float water valve have a wide range of applications, practical to use, suitable for water tanks, water towers, boiler machines, rice steamers, water pumps and other places you want.
  • Well Sealed: the water tank float switch features a rubber seal, with nice flexibility, not easy to tear or wear, high temperature resistant, playing a fine sealing role.
  • Meanwhile, its float rod can be adjusted, simple to use.
  • Enough to Use: this package provides you with 6 pieces of float ball valves, whose model is DN20, thread is about 3/ 4 inch, applicable medium is water, able to withstand temperature of 0-50 degrees, sensitive and flexible, enough for you to use and replace.
Check Stock

Cash Acme Water Heater Tank Booster Pro, Thermostatic Mixing Valve 3/4

  • COMFORT:Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters.
  • PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.
  • SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.
  • COST EFFECTIVE: Adding a Tank Booster Pro thermostatic mixing valve to an existing water heater allows water to be stored at a higher temperature.
  • SHARKBITE: use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female....
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock