Top Temperature Controller Equipment

XH-W3001 Digital LED Temperature Controller Module Digital Thermostat Switch with Waterproof Probe Programmable Heating Cooling Electronic Thermostat Range from -50℃ to 110℃ (12V 10A 120W) (2 Pieces)

  • 2 Working modes: this digital LED temperature controller module has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 110°C.
  • The high temperature control accuracy reaches 0.1℃.
  • Stable and reliable: the LED indicator light can display the current output status.
  • The digital display tube can display the measured temperature, and the temperature measurement and control accuracy is high.
  • Durable material: this XH-W3001 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance.
  • Waterproof probe: equipped with a 1-meter NTC10K probe made of stainless steel, which is waterproof and not easy to rust, easy to use and can last for a long time.
  • Suitable for: the temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others.
Check Stock

ROSITEK RNP4 4-Ton Hydraulic Heat Press Machine - 3x5 Inch Heated Plates

  • The equipment is a complete press machine, apart from preparing your necessary products like bags, pre press mold, and paper, no extra equipment is....
  • The 3x5" working surface is easily handling 7-14 grams, we recommend running a 2-piece small disk shape or a 1-piece rectangular chip..
  • It contains a set of built-in removable PID temperature controller kit that includes 2-piece of pluggable controller, 2 stainless steel rod heaters,....
  • It includes 1 replaceable 4 ton vertical bottle jack that maximizes up to 5 ton pressing force, easily replacing after removing the PID temp....
  • The 2-piece insulation wood layer effectively prevents the machine from overheating and causes damage to the machine..
Check Stock

WACOOL Digital Reptile Thermostat Terrarium Temperature Controller 40-112°F for Reptile Heating Lamp Heating Pad Cooling & Heating Mode Rotation Operation 8.3A 1000W Max

  • 【Cooling or Heating Setting】This reptile thermostat controller is capable of controlling a heating and cooling equipment.It can be used for....
  • 【Car Dial Display and Steering Wheel Rotation Design】Easily adjust temperature using the steering wheel rotation. Car dial display for good....
  • 【Safe and Reliable Thermostat】This reptile thermostat controller support temperature alarm, alarm flashes when temperature reaches extreme high or....
  • 【High Accuracy and Memory Function】This reptile thermostat controllerdetects real-time temperature and the changes sensitively at wide control....
  • 【Waterproof Sensor】The reptile thermostat with waterproof sensor can be used in high humidity environments and the quick-plug is easy to replace..
Check Stock

Zacro Digital Heat Mat Thermostat - Reptile Heat Pad, for Seed Germination41-108°F, 1-Pack, Black

  • Variety of uses: heating thermostat for seed germination, rooting, reptiles, home brewing and fermentation to provide a constant custom temperature, so that your environment is maintained within the ideal temperature range..
  • Bright and easy-to-read LCD display and work indicator settings make it easy to see the operating status of the thermostat and temperature changes at any time..
  • Precise temperature control:The digital thermostat provides temperature control between 41°F and 108°F (5-42°C). Accuracy is ±0.1 degrees, no need to worry about overheating and not meeting your temperature requirements.Digital display supports units in both Fahrenheit and Celsius..
  • Quality Assurance:The product has passed UL test. Zacro is committed to providing customers with sincere service and high quality products. Please buy with confidence.
  • NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment.Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug..
Check Stock

Adjustable Car Fan Controller, LITROK Digital Temperature Control Switch Kit

  • Usage range:The temperature control range is -67℉~257℉ (-55℃~125℃),input voltage DC 12V/24V.
  • Separation control:Use the controller to build control circuits, so that the load circuit can be built independently.
  • Start-stop interval:The temperature when starting or stopping the load equipment is 10 degrees Fahrenheit below the set temperature value.
  • Convenient operation:Use LCD and keys to set required temperature value and switch temperature unit.
  • Main accessories:Total length is about 1.5 meters high-precision digital temperature sensor,with a stainless steel case probe.40/60 amp relay.
Check Stock

KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

  • 【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch..
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range..
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error..
  • 【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS..
  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home.
Check Stock

Twidec/DC 12V Temperature Controller Programmable -50 to 110 ℃ (-58 to 230 °F) Red/Blue LED Display Monitor Heating/Cooling Thermostat Control Module with NTC 10K Waterproof Sensor Probe

  • Temperature measuring range:-50 to 110℃ (-58 to 230 ℉).
  • Resolution: 0.1℃ at -9.9 to99.9, and 1℃ at other temperature intervals；refresh rate: 0.5 s.
  • Dual color LED display:Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time.which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature.
  • NTC 10K Which is waterproof, moisture-proof and anti-rust. Available for remote temperate measuring and controlling. It can control heating or cooling according to different needs.
  • The electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is ±0.1 degrees Celsius with 0-110℃ high temperature protection.
  • The thermostat can be widely applied in intelligent home and industrial equipment, fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems..
Check Stock

Antrader KSD301 Thermostat, N.C. Temperature Control Switch Thermostat Thermo Switch for Microwave 10A, 10-Pack

  • Advantage: Contact sensor, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon.
  • Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature..
  • Features : temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.
  • Wide used in home appliance's motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc.
Check Stock

Reptile Temperature Controller with Timer, Day-Night Timer Thermostat, 3 Outlet Timer Thermostat for Grow Tent, Incubation, Snakes, Fish Tank, Heater, humidifiers, Ball Pythons, Bearded Dragon Tank

  • Timer thermostat for reptiles, 3 plugs outlet can work independently. Integrated design with day/night temperature and timing control, which can meet the physiological needs of temperature, and lighting for reptiles, amphibians, or plants..
  • Unique design, reptile-friendly design. Raising snakes, lizards, ball pythons, chameleons, corn snakes, tortoises, bearded dragons, and frogs need a controller like this, which can customize the time and temperature of your pet, control the lighting time, control the temperature, and scientifically raise reptiles..
  • It is suitable for heating or cooling equipment, controlling light time. temperature control. Socket with time control to manage your aquarium or reptile terrariums to control your ceramic heat lamps, heat mat, UVA lamps, UVB lamps, incubators, fans, A/C, heat sink, blower, and heater to Simulate the natural environment..
  • ❄️Multifunctional thermostat with timer. This day/night temperature controller with high and low temperature alarm, timing function, time cycle function and temperature calibration function, support ℃/℉..
Check Stock

Dixell XR04CX-5N0C1 230V/50-60Hz Digital Thermostat Controller Defrost Relay Programmable-Commercial for Refrigerating Unit

  • Advantage: Contact sensor, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon.
  • Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature..
  • Features : KSD9700 temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.
  • Wide used in home appliance's motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc.
Check Stock

TECHTONGDA 110V Commercial Manual Breakwater Donut Fryer Mini Donut Maker Doughnut Making Machine with 3 Models and 7L Hopper

  • @【3 Sizes Models】~ Can produce outer diameter of 1.57"-1.96"(4-5cm), 2.36"-2.75"(6-7cm), 3.14"-3.54" (8-9cm) donuts. Oil tank size:32.2"*6.2"*3.9" (820mm*160*100mm )..
  • @【High Quality】~ All stainless steel 304 body shell, high-energy heating wire and precise temperature control. The temperature can be adjusted by temperature controller..
  • @【7L Hopper】~ Large hopper design can hold 7L material. Simple operation and high efficiency. This machine use precise orbit devices, high power motor, which maintaining equipment vibration in the smallest value, low noise, low calorific value, stable use and longer life..
  • @【Easy Timer】~ Timer setting scope:0--30seconds. The timer is exposed, which is convenient to adjust the length of the cutting time. And it can count the number of donuts..
  • @【Widely Application】~The doughnut machine is used to make crispy and delicious doughnuts (cakes). It is mainly used for forming, punching, frying and discharging doughnuts. It is suitable for catering equipment and homework used in the related catering industry. Widely used: snack bar, cake shop, western restaurant, etc..
Check Stock

GOQOTOMO Smart Temperature Controller Thermostat Heating and Cooling Mode for Homebrew Fermenter Greenhouse Terrarium 100-240VAC NTC Sensor Improved Version

  • [Smart Display] Everything clearly displayed in one color screen, including measured temperature, heating/cooling temperature, high/low temperature alarm and compressor delay..
  • [User Friendly] It is the easiest temperature controller on the market that you are able to operate without user manual. Setup and display is intuitive..
  • [Detachable Probe] The probe is easy detachable from Type-C port. Probe replaceable once it breakdown..
  • [Dual Output] Two independently controlled relays allow to control refrigeration and heating equipment at the same time..
  • [Reliable Accuracy Reading] Enhanced NTC sensor offer accuracy measuring and reading..
Check Stock