Top Temperature Resistant Shim Material

1-1/2 C360 BRASS ROUND ROD 6\ long +.07\/-0 Solid 1.50\ Diameter H02 Lathe Bar Stock

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Bosch 2329839 Table Saw Blade, Blue

  • Stainless steel version. The item Comes with a carrying case..
  • Anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material..
  • Splinter-resistant cuts in veneer plywood, melamine and hard or soft woods..
  • Four-tooth chippers that keep the cut flat and virtually free from tear out.
  • 3/32-Inch chipper made especially for undersize plywood with steel shim set for cuts between 1/4-Inch and 29/32-Inch..
Check Stock

1095 Spring Steel Sheet, Blue Temper, AMS 5122/SAE 1095/AISI 1095/AISI 1095, 0.010\ Thick, 6\ Width, 25\ Length, Pack Of 2

  • Made from a high carbon 1095 hardened and tempered spring steel.
  • Precision Brand's blue tempered shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability.
  • Material is preferred by tool and die makers for templates and shim applications where toughness and high fatique strength are required.
  • Measures 6" wide by 25" long by 0.010" thick.
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

Precision Brand 17SN6 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.006″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SN9 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.009″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Arbor Shim, 0.0100x7/8 ID, Pk10

  • Price For: Each Inside Dia. Tolerance: +0.011" Temper: Full Hard Outside Dia. Tolerance: +/-0.002" Meets/Exceeds: AISI 1008-1010 Material: Low Carbon Steel Item: Arbor Shim Tensile Strength (PSI): 80, 000 psi Item: Arbor Shim Thickness (In.): 0.0100" Thickness (mm): 0.254mm Thickness Tolerance: +/-0.00075" Inside Dia.: 0.875" Outside Dia.: 1.375".
  • Rockwell Hardness: B90 Country of Origin (subject to change): United States.
Check Stock

Hassay Savage 10212 3/16\ Style II Keyway Push Broach

  • Keyway broach pushes through the material to create a keyway-shaped hole.
  • Made of M-2 high-speed steel for a balance of strength and toughness.
  • Precise tooth rake and relief angles provide efficient broaching of mild steel.
  • Designed for use with manufacturer's associated bushing or shim style II.
  • Comes with one shim to adjust depth of cut.
Check Stock

Hassay Savage 10320 5/16\ Style III Keyway Push Broach

  • Keyway broach pushes through the material to create a keyway-shaped hole.
  • Made of M-2 high-speed steel for a balance of strength and toughness.
  • Precise tooth rake and relief angles provide efficient broaching of mild steel.
  • Designed for use with manufacturer's associated bushing or shim style III.
  • Comes with one shim to adjust depth of cut.
Check Stock

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

  • 316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
  • Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
  • Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
  • There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
  • Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.
Check Stock

Shim, Round, Min ID 0.687 in, PK25

  • 003cb003ePrice For:003c/b003e Each 003cb003eInside Dia.003c/b003e: 0.687" 003cb003eShim Material003c/b003e: Stainless Steel 003cb003ePackage Quantity003c/b003e: 25 003cb003eColor003c/b003e: - 003cb003eTemp. Range (F)003c/b003e: - 003cb003eShim Thickness003c/b003e: 0.0030" 003cb003eThickness (In.)003c/b003e: 0.0030" 003cb003eShim Temper003c/b003e: Not Rated 003cb003eTensile Strength (PSI)003c/b003e: 70,000 003cb003eMaterial003c/b003e: 18-8 Stainless Steel 003cb003eRound Shim Type003c/b003e: Arbor Shim 003cb003eThickness Tolerance003c/b003e: +/-0.0005" 003cb003eGrade003c/b003e: 18-8 003cb003eItem003c/b003e: Shim 003cb003eMeets/Exceeds003c/b003e: -.
  • 003cb003eRockwell Hardness003c/b003e: B80 003cb003eOutside Dia.003c/b003e: 0.873" 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

Polyester Round Shim, Red, 0.002\ Thickness, 1-3/4\ ID, 2-3/4\ OD (Pack of 10)

  • Color coded arbor shims are made from a high quality plastic material.
  • Red color identifies the shim as 0.002" thick.
  • Color coding eliminates need for micrometer, saves time and reduces error.
  • Non-magnetic and non-conductive to electricity.
Check Stock