Top Temperature resistant Coatings

Category Fore | Torrent 14 Hybrid Waterproof Golf Bag | Carbon/Red

  • ...ANTEED WATERPROOF. We constructed this golf bag to ensure waterproofing by using 420 denier Nylon with technical thermoplasticized coatings on all exterior and interior surfaces. Just wipe down with wet cloth to clean. The bag coating is ultraviolet resistant and the materials are cold/heat resistant to ensure that temperature has zero effect on bag elasticity. The thermoplastic coatings on the bag are biodegradable and categorized as California GREEN..
  • OUTSTANDING FEATURES. 8-Pocket Design, including a large side apparel pocket, two mid sized pockets, two deep premium velour lined valuables pockets each with bungee, carabiner key clip, and separator for glasses and cellphone, insulated cooler pocket with rear drainage, pocket for ball/tee storage, and a deep zippered scorecard pocket. All eight pockets use a wider top grade waterproof zipper with hideaway slot and rubber U pull..
  • GOLF BAG SPECS: Golf bag weighs 6.3 lbs. Hybrid cart, carry or push cart bag with cart bottom, strap channel, premium carbon fiber titanium legs, internal kickstand, and anti-slip feet. Removable Quick Clip shoulder straps. 14 way top fits midsize grips and jumbo putters with each well lined to the bottom of the bag to prevent grips from grabbing and wearing. Zinc Alloy towel....
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

TapeCase 0.125-5-3M 5557 White Polyester/Paper/Acrylic Adhesive Water Contact Indicator Tape, 0.01" Thickness, 5 yd Length, 0.125" Width

  • Used to indicate water contact, rapidly changes from white to red when contacted with water.
  • Does not falsely indicate water contact in high humidity environments.
  • Top film layer is printable by thermal transfer, flexographic, and screen printing methods.
  • Excellent bonding to low surface energy plastics and powder coatings.
Check Stock

AIRHEAD MONTANA Kayak, 1 person

  • designed for lakes and moderate white water.
  • All 3 air chambers are completely enclosed by rugged 840-denier nylon with.
  • UV and water-resistant coatings. Low drag and superior tracking with 4 bottom fins.
  • Refer to the PDF attached below for User Manual.
  • Designed for lakes and moderate white water.
  • UV and water-resistant coatings. Low drag / superior tracking with 4 bottom fins.
Check Stock

Blue Diamond Cookware Diamond Infused Ceramic Nonstick 4.5QT Dutch Oven with Glass Lid Lightweight Design PFAS-Free Dishwasher Safe Blue

  • Forged Aluminum Construction: 50% lighter than cast iron with all the performance..
  • Blue Diamond’s Signature Diamond-Infused Ceramic Nonstick: The ultra-durable diamond-enhanced ceramic coating is 5x harder and 10x longer lasting then traditional nonstick coatings, making it scratch-resistant and metal utensil safe.
  • Toxin-Free: Free of PFAS, PFOA, lead, and cadmium.
  • Cook & Look Dome Lid: This temperature shock-resistant cast glass lid gives you an easy look at your meals without losing heat.
  • The dutch oven rounded dome lid provides 85% more room than a traditional lid and promotes better airflow Huge Capacity—Fits a whole chicken!.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8\4T - Made in Taiwan (1 Piece, 3/8\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/8'4T - Made in Taiwan (5 Pieces, 1/8')

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE5/16"4T - Made in Taiwan (1 Piece, 5/16")

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ICSM Chamfer End Mill- CNC Carving Bits V Groove 90 Degree 3/8 Diameter 3 OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan 1 Piece 3/8 90°

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Ideal for Chamfering, Carving V Groove, Centering.
  • 90 Degree, Shank Diameter: 3/8", Full Length: 3”.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • ZrN-A COATING - Zirconium nitride (ZrN) +Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

KBS Coatings 8404 DiamondFinish Watercolor Clear Coat - 1 Quart, 32 Fl Oz (Pack of 1)

  • DiamondFinish Clear is Formulated to Apply Directly Over Other Coatings or Direct To Metal DTM. DiamondFinish Clear is a permanent high solids over 60% and low VOC's Clear Coat.
  • DiamondFinish Clear is a Moisture Cured Urethane which is an advanced coatings technology offering durability, flexibility, corrosion and chemical resistance. DiamondFinish Clear can be applied directly to Painted Surfaces with Minimal Surface Prep. DiamondFinish Clear is incredibly tough and hard like no other clear coat on the market.
  • DiamondFinish Clear is a water clear high gloss clear coat remains permanently flexible and can perform in the toughest environments without yellowing, cracking or peeling. DiamondFinish Clear can be applied with a brush without leaving any brush marks, roller and conventional spray gun.
  • With DiamondFinish Clear, unlike normal two-part coatings, no hardener is needed. You can just stir and go. DiamondFinish Clear will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit. DiamondFinish Clear can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part....
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 2 Flute - ISE1/4\2T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price..
  • DEDICATED SUPPORT - Contact seller via Amazon anytime for cutting condition data to get the best performance from your Speed Tiger cutters.
Check Stock