Top Test Block

HHIP 8902-0155 35-55 HRC Rockwell Standard Test Block

  • Can be used with 8902-0150 Hardness tester and most other imported Hardness testers.
  • Each block is marked with the specific measured value..
  • Supplied with a calibration certificate from the factory..
Check Stock

See the Light

  • 6-Way Test Kit for Total Acidity, Total Bromine, Total Chlorine, and pH..
  • Equipped with Testing Block, Carrying Case, and Instructions..
  • System: Drop Test and sureCHECK comparator.
Check Stock

TRZ Refractometer Honey 10-32% Water Honey 58-90% Brix Sugar Baume for Beekeeping, Honey, Condensed Milk, Sugar Syrup, Fruit jam, Hamh Optics&Tools

  • USE: It is suitable for measuring honey, condensed milk, vegetable oils, sugar syrup, fruit jam and molasses..
  • Measruing Range: Brix (sugar): 58-90%, Resolution: Brix (sugar): 0.2%, 10-32% water with 0.2% reading.
  • Easy to use. Supports two calibration modes: The upper calibration line with 78.8% Brix is suitable for clove oil calibration solution and requires an additional standard test block: The lower calibration line consists of 65% Brix, a colorless and non-toxic calibration solution with a slight smell of clove oil. Do not need a test block, is more convenient and accurate..
  • Precision Measurement: Sharp dividing line (blue-white), good readability (daylight recognizable), adjustable eyepiece for sharpness adjustment。.
  • Do not calibrate this refractometer with water..
Check Stock

Instrukart Dry Block High Temperature Calibrator AI-DBC 650 for Calibration Labs Pharmaceutical divisions Thermal Plants divisions Along with Calibration Certificate

  • Accuracy: ±0.6°C, Bath Stability: ±0.5°C.
  • Measuring Functions: J Type Thermocouple, K Type Thermocouple, T Type Thermocouple, R Type Thermocouple, S Type Thermocouple, N Type Thermocouple, MA, MV, Volts, Ohms, RTD (Pt 100).
  • Temperature Steps: 50°C, 150°C, 300°C, 450°C, 600°C.
  • Switch Test: Continuity check with OPEN / CLOSE indication.
  • Transmitter Supply: 24V DC ± 10% (Loop Powered).
  • Power Supply: 230V AC ± 5% / 50Hz, 500 W for 350UTC.
  • Supply Scope: Instrument, Power Cable, Carrying Case, Test Lead(2 & 3 Wire), Insertion Tube, Insertion Tool,Spare Fuses: 6A x 2nos User Manual, Calibration Certificate.
Check Stock

Goupchn Multimeter Test Leads Kit 21PCS Digital Electrical Test Probes Set with Alligator Clips Mini Grabber SMD IC Test Hook Clips Test Tweezer Replaceable Precision Sharp Probes

  • ...y can be switched to meet your different testing needs and ensure high strength, conductivity, long life and accurate data. Voltage: 1000V. Current: 20A..
  • Mini Grabbers: Mini grabber test hook clip has a retractable clip hook and an extension lead which provides safe and secure connections for clamp and any terminal block. The front end of the hook is retractable with a spring, so objects can be firmly hooked. Perfect for continuity testing of circuit board components, resistors, logical analyzer capacitors or other SMD components..
  • Test Tweezer: Test leads set also contains a test tweezer. Suitable for resistor, capacitors and other SMD components. Non-slip comfort grip, it is convenient to use with one-handed operation of multi-function testing. Length: 15.3cm/6inch..
  • Wide Use: 21PCS multimeter test leads kit works perfectly with any multimeter and test instrument. Replaceable needles, banana plug adapters, alligator clips, mini grabber SMD IC test hook clips and test tweezer can help expand testing capability and flexibility..
  • Package include: 2PCS Multimeter Leads, 8PCS Replaceable Needles, 2PCS 4mm Banana Plug Connectors, 2PCS U-Type Adapters, 2PCS Heavy Duty Alligator Clips, 2PCS Minigrabber SMD IC test hook clips with extension leads, 2PCS Safety ....
Check Stock

Poolmaster Water Chemistry Case (22270) Premiere Collection 5-Way Swimming Pool & Spa Test Kit, Small, Neutral

  • Tests for Chlorine, Bromine, pH, Acid Demand, and Total Alkalinity.
  • Includes clear-view round test block with integrated color chips for accurate color matching.
  • Includes 1oz. solutions of #1-#3 and 1/2oz. solutions of #4 – #5.
  • (Note: #2 Phenol Red is not the same as Phenol Red – DO NOT interchange).
  • #2 Phenol Red is for use with 5-Way Test Kits and Phenol Red is for use with 2 or 3-Way Test Kits.
  • Note: The #1 solution is sealed to comply with transportation regulations. No other solutions in this kit require sealed caps..
Check Stock

1Storm Motorcycle Full Face Helmet Visor Shield for Brand 1Storm Helmet: Model HJDJ11, DJ11

  • UV Tested: Biltwell Bubble Shields are UV rated at UV +50 with over 91 percent UVA block and over 99 percent UVB block. Shields were evaluated for UV resistance as per test method AATCC 183.
Check Stock

Above Water Systems, Inc. Seagull IV X-1F and PurestOne TP-1 Compatible Replacement Cartridge

  • The AWS-1 Replacement Filter Cartridge employs carbon block The stringent LABORATORY TESTS were specifically designed to test the ability to reduce contaminants such as Arsenic V (pentavalent arsenic) and Volatile Organic Compounds (such as chlorinated solvents, chloroform, carbon tetrachloride, dichloroethane, dichloroethylene, methylene chloride, tetrachloroethylene, trichloroethane TCE, trichloroethylene, vinyl chloride and benzene..
  • Above Water Systems AWS-1 and AWS-2 carbon block filter formulations are tested according to NSF/ANSI Standard 42 (Aesthetic Effects) and Standard 53 (Health Effects). The AWS-1 filters are designed to be used where the water is microbiologically safe and has been adequately disinfected. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts..
  • The AWS-1 and AWS-2 carbon block filter formulations have been tested according to NSF/ANSI Standard 53. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system..
  • The AWS-1 and AWS-2 carbon block filter formulations have been tested according to NSF/ANSI 40 for removal of Incidental Contaminants / Emergin....
Check Stock

Leviton PFGF2-BZ Pop-Up Floor Box with 20 Amp, Tamper-Resistant Self-Test GFCI Outlet, Bronze

  • TIME SAVING INSTALLATION - Terminal block is pre-wired for easy access, just insert the wires and tighten the screws.
  • CONVENIENT – Low profile, stylish metal cover recesses into the floor when not in use reducing above floor height to ¼ inch. Press button to access.
  • PROTECTION – Meets or exceeds UL 514A including scrub water test. IP 44 rated protection from ingress water spray from any direction when closed.
  • VERSATILE – Can be used with a variety of flooring types: Tile, stone, wood, laminate, carpet, concrete and vinyl.
  • SELF-TEST TR GFCI INCLUDED – Periodically conducts an automatic internal test to confirm that it can respond to a ground fault.
Check Stock

BESTNULE Punch Set, Pin Punches, Punch Tool, Roll Pin Punch Set, Made of High Quality Metal Material Including Punches and Hammer, Mechanical Repair Tool, with Organizer Storage Box (with Bench Block)

  • ...ddition, we added 4 replaceable hammer heads (1 brass, 1 chrome, 1 nylon in white and 1 rubber in black), so you can choose the right one for your needs. The hammer has a non-slip design, which can cooperate with you in the process of use can be better grip..
  • 【Bench Block】Special and durable surface finish to protect your precious from scratches while drifting and staking. Our bench block has a main spring removal groove.
  • slide rail dressing round bottom channel.
  • ejection port dressing channel. Great help for maintenance!.
  • 【3D Test】We have assembled a dedicated team and professional staff to test the quality, durability, and performance of our products. Each punch and bench block has been professionally designed for industry and 3D simulation to test the performance. After many experiments we make sure the punch set you get can perform as it should. All punch tools are neatly stored in boxes that are clean and tidy for easy storage and portability. We pack our products as well as possible. This is our promise!.
Check Stock

Four E's Scientific Mini Dry Bath Incubator with 15 x 1.5ml Heating Block, LED Display, High Temperature Precision, Timing Control for Laboratory

  • 【PreciseTemperature Control】The temperature of this Mini Lab Dry Bath Incubator Heater is up to 100°C and the temperature control accuracy is ±0.5°C,display accuracy ±0.1°C. Room temperature to 100°C in less than 15 minutes..
  • 【5 Program Setups】The system can save 5 sets of programs of the temperature and time,0~99h59min.When Mini Digital Dry Bath Incubator with Heating Lid is powered on but not when working, short press the button of “Prog.” to select the 5 default programs from P1 to P5.Program for quick operation..
  • 【More Efficient】Our Mini Digital Dry Bath Incubator with Lid,which is provides quicker heating and higher heating efficiency.The transparent cover can also better observe the progress of the test..
  • 【Heating Block】Including 15x1.5mL Heating Block x 1,hole diameter is Φ10.8mm/0.43inch,the hole depth is 37mm/1.46inch.Suitable for 1.5ml conical centrifuge tube.Snuggly holds the test tubes enabling precise and uniform heating..
  • 【LED Display】This Heating Dry Bath Incubator has Intuitive LED digital display, easy to operate.Low operation voltage (12v)..
Check Stock

ZKTOOL Universal Easy Intake Adapter, Smoke Diagnostic Machine,Fuel Leak Detector, Air Tightness Tester,for 12V Vehicle Pipeline Leak Tester，Adapt to Any Fog Machine

  • 1. Quick intake adapter It has the characteristics of fast and fast air inlet/exhaust of the seal, to quickly leak test the integrity of the entire induction system with one simple procedure. The universal intake adapter can be used with any brand of smoke machine or diagnosis Use leak detectors together to reduce the workload of leak inspection.
  • 2，Universal intake adaptor is an inflatable block off bladder with a pressurized vapor pass-through that allows technicians to test an entire intake or exhaust systems quickly and easily..
  • 3，Universal intake adaptor can be used with any brand of smoke machine or diagnostic leak detector to reduce workload on a leak check，Inflation is to seal the air inlet, it still can work as normal even if the inflated airbag is not a perfectly round.
  • 4，Block off bladder conforms to any shape of intake / exhaust: Round, oval, square, rectangular and even severely angled and hard to reach intake / exhaust systems, while allowing vapor to pass through for fast diagnostics..
  • 5.Compatible with any smoke machine, It fits 100% of automobiles, from passenger car to heavy-duty trucks,.
Check Stock