Top Textile Oil Gas Hose

Fuel Transfer Hose, Fuel Hose 3/4\ x 20' (6 m), 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose

  • 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose. Designed for use with all electric fuel transfer pumps..
  • Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils..
  • One end of thread is 3/4 In. NPT, the other end is 1-inch NPT. Length 20 ft..
  • This Fuel Transfer Hose 3/4 inch may also know as fuel transfer hose 1 inch,1 inch fuel hose 20 feet, Fuel pump hose,Farm Tank Fuel hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Pump hoses,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Fuel hoses,Diesel fuel line hose,Fuel fill hose,Fill hoses,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose..
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Crankcase Ventilation Valve Oil Separator Hose Compatible with BMW E46 E60 E39 X3 X5 320i, 323i, 325, 325i 328i, 330i, 525i, 528i CCV PCV Valve Ventilation Separator 5 Piece Value Kit 11611432559

  • 【PCV CCV Exhaust Hose For BMW Replacement】Since the whole point of positive crankcase ventilation is to keep these gases out of the crankcase, the PCV valve is designed to close off when this happens and block the back flow of gases. If the PCV valve hose is broken, the gas will not be transferred back into the engine, which will reduce your engine efficiency, increase harmful gas emissions and the probability of engine failure..
  • 【Fit The Following Vehicles】This E46 PCV Valve hose kit is a direct replacement for the original vent hoses and PCV valves on a variety of vehicles. This includes most 3 series and 5 series models from 1997-2005. SEE THE FULL LIST ON THE PRODUCT DESCRIPTION PAGE BELOW..
  • 【Replace Part Numbers】This X3 X5 CCV hose kit can replace 11617504536 / 11617501566 / 11611432559 / 11157532649 which are commonly found on popular BMW model including BMW E46 3 series E39 E60 X3 X5..
  • 【OEM Quality & Direct Fit】Manufactured with high temperature plastic materials & advanced technology, meets OEM standard. Even though this is not a genuine BMW PCV crankcase ventilation oil separator hose, but it works even better and lasts longer. Save your time and fund by replacing the PCV crankcase ventilation oil separator hose yourself..
Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

  • [Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
  • [Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
  • [ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
  • [Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
  • [Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..
Check Stock

HORUSDY Portable Power Battery Pump, 2.2GPM, Water & Fuel Transfer Pump

  • DURABLE RUBBER MANUAL HAND SIPHON PUMP - This syphon pumps is super easy to use, you just put the fuel transfer hoses in where you want them and pump the hand pump and it draws out all the fluid. This gasoline siphon pump made it effortless to empty out my gas tanks. So worth the purchase and it'll pay for itself in the gas savings alone in one season!.
  • QUICK FUEL TRANSFER - The siphon pumps the oil from one container to another easily, and is meant to go down into a fuel tank without an anti-siphon filter. The gas syphon is great for stealing a bit of gas for your lawn mower when you need it, you just push the tube down, start pumping the bulb and fuel starts to flow, the same as with the old way of sucking on the tube but this is much safer..
  • HEAVY DUTY HOSE - The gasoline siphon hose tube is able to get into small spaces. Siphon tube is nice and thick so no easy break/crushing. Siphon hand pump is made of a thick silicone outer frame. Make sure you put the long hose into the liquid you want to pump out and the short tube on the end of the rubber ball where you want to send the liquid. The tank height must be at least 30 inches or higher than the receptacle..
  • NO MORE MESS WHEN TRANSFERING LIQUIDS ! - This siphon gas pump transfer allows you ....
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Hakka Commercial Stainless Steel Deep Fryers Electric Professional Restaurant Grade Turkey Fryers (8 Liter x2)

  • 【20L HIGH CAPACITY】Our gas deep fryer has 10L*2 basket,the large capacity of 20L is very suitable for commercial and household, such as fast food restaurants, cafes, snack bars,party or family gatherings, etc..
  • 【POWER TYPE】This fryer is heated by liquefied petroleum gas (LPG) and propane,no electricity. The hoses connecting liquefied petroleum gas and fryer also had been provided now. Hose: Inner Diameter: 8.9-9.3mm , Out Diameter: 17.9mm-18.3mm.
  • 【HEAT UP QUICKLY】The double-cylinder fryer heats up quickly and evenly.Precision temperature control for 0°F to 392°F.This fryer can meet your various needs in terms of fried food. French fries, chicken wings, onion rings, shrimp or other snacks can all be perfectly cooked..
  • 【SAFE & DURABLE】The gas fryer made of heavy duty food grade stainless steel (0.8mm) construction,strong and durable, not easy to rust.It is equipped with two baskets and lids to prevent splashing of hot oil, and the plastic basket handle can prevent hand burns..
  • 【TIPS】State from California pls do not purchase for commecial use!!! It is strictly forbidden to use the fryer to heat the solid oil. The solid oil includes animal oil, solid butter, etc. The use of solid oil is easy to taste bad fo....
Check Stock

Swpeet 84Pcs 10 Sizes Zinc Plated Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Agriculture, Plant & Construction

  • It is used as a car hose separator clamp fuel line mounting divider hose fitting adapter..
  • Made of aluminum alloy, rust proof, anti corrosion, waterproof, oil proof, durable in use..
  • Detail Size: 50x23x12mm / 1.97"x0.91"x0.47"(L*W*H).
  • Easy to install and convenient to use. Universal fit for AN8 gas/water/oil/fuel brake hose..
  • Package Include: 4 Pcs x AN8 Hose Separator Clamps..
Check Stock

JDMON Oil Catch Can Tank Kit with Breather 300ml Aluminum Polish Engine Air Oil Separator Tank Reservoir Kit Universal (Blue)

  • 6061 Aluminum Durable Quality: JDMON oil catch can with breather is made of sturdy T6061 aluminum for enhanced strength and durability,not easy to be damaged and lasted for long time.Note: The hose can’t resist high temperature, you’d better purchase another rubber vacuum hose to meet your demand..
  • Increases Horsepower& Keep Engine Clean: This universal oil catch can catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It will prevent the dirt and oil from your intake system into your car engine which can keep the engine clean and preserve engine life..
  • Prevent Oil Leak: JDMON oil catch can kit is built-in o-rings which can prevent oil leak..
  • Easy to Use & Clean: This oil catch can set came with dipstick, measuring fluid level no need to open the can. The material of it is polished, so it’s easy to clean, no need any tools..
  • Package Includes: 1*300ml oil catch can, 1*hose,1*Breather Filter, Necessary Bracket & Screws as picture shows.
Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • ...rong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock