Top Textile Spinning Machinery

CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2

  • Made of 45# steel with high wear-resistance,strong and durable..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

  • Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
  • Made of 45# steel with high wear-resistance, strong and durable..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
  • Scope of application: for all kinds of mechanical transmission occasions..
Check Stock

EPLZON A3144 Hall Effect Sensor 3Pins Magnetic Detector for Arduino (Pack of 20 pcs)

  • Output reverse breakdown voltage: Vce 50V..
  • ✅Operating temperature range: -40℃ to 125℃.
  • Storage temperature range: -55～150℃..
  • ✅Good performance: small size, high sensitivity, fast response, good temperature performance, high precision and high reliability..
  • ✅Application areas: Non-contact switch, automatic ignition, brake circuit, position, speed detection and control, safety alarm device, textile control system,Brushless DC motors, encoders, sewing equipment, textile machinery, household appliances,safety alarm devices and other automation control fields..
Check Stock

LEAQU Straight Welding Wire Copper Aluminum Alloy High Efficiency Welding Wire Low Melting Point Smooth Surface 1

  • It features with the high-quality and exquisite workmanship that makes it high-quality and exquisite workmanship. because of the wide range of applications, it will be used in a variety of welding scenarios..
  • With the characteristics of low melting point and no splash, it is very efficient and useful. due to the stable arc, it can be very reliable and practical..
  • Made of stainless steel material, it is very durable to use..
  • It is widely used in petrochemical industry, food machinery, fertilizer equipment, spinning and weaving machinery, etc..
Check Stock

ASI ASI328002 24Vdc Pluggable SPDT Relay with DIN Rail Mount Screw Clamp Terminal Block Base, 6 amp, 250 VAC Rating, 24 VDC Coil

  • ... spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility..
  • A WIDE RANGE OF APPLICATION: Widely used in Industrial automation, electric furnace heating, stage lighting control, photocopiers, medical equipment, petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities and other automation control areas.and so on. etc..
Check Stock

BEMONOC 2Pcs/Pack HTD 5M Rubber Timing Belts Closed-Loop 400mm Length 80 Teeth 15mm Width Industrial Timing Belt

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

BEMONOC Pack of 2pcs HTD 3M Round Rubber Timing Belts Closed-Loop 201mm Length 67 Teeth 15mm Width Industrial Drive Belts

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

Szliyands 220V 20mA Energy Saving LED Indicator Light Mounting Hole Size 22mm (7/8 Inch) Red Green Yellow 6 Pcs

  • Rated voltage: AC / DC 220V, Model: AD16-22D / S, Indicator color: Red, Yellow, Green..
  • 6Pcs environmental protection lamp: long life and reliable LED indicator, energy saving, low maintenance cost..
  • Easy to install: The screw clamp is easy to connect and has strong electrical conductivity. You only need to drill a 22mm (7/8 inch) hole and then use screws to fix it..
  • Practical and Convenient: These panel-mounted indicators ensure you a visual status indication of any index signal, expected signal, emergency signal, and other index signals..
  • Widely used: It can be used in power equipment, textile machinery, printers, ships and mining machinery..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock