Top Tft Touch Screen Display

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

  • 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

PalmOne Tungsten T3 Handheld

  • Operating System - Microsoft Windows Mobile 6 ( Pocket PC ).
  • Display - 3.5" Brilliant TFT LCD 65k full-colors, 16-bit display QVGA, 240x320 resolution with touch screen (anti-glare).
  • Memory - 256MB Flash ROM and 64 MBBluetooth v2.0(EDR) / SIR 115.2kbps (max) / USB 1.1/ WiFi 802.11b+g.
  • Expansion Slot - 1 x SD slot (SDIO/SD/MMC ) up to 4GBIntegrated microphone and speakerFull duplex record and playback1 x 3.5mm earphone jack and MP3 stereo.
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

Ciyoo N1 IP67Waterproof Fitness Smartwatch for Women ,Fitness Tracker Watch with Heart Rate Monitor Step Sleep Tracker Jewelry Watch White

  • Fashion Design -Fashion women appearance design, low-key and simple watch strap and flip the wrist screen switch, show a unique charm design.Finally,....
  • The intelligent LED display design allows you to quickly and easily adjust the pattern with your fingertips. The bracelet will vibrate to remind you....
  • Large screen full touch, TFT true color screen.
  • High Sensitivity Touch Screen - The 0.66 inch white light level screen allows information to be clear on the screen.With the round screen operation,....
  • Convenient Health Count —This journey smart watches, by scanning or code, “Droihealth " in the app store market search in real-time records your....
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

HiLetgo 3.5\ TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560

  • 3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560.
  • Support Arduino Mega2560 Directly inserted.
  • OnBorad level conversion chip for 5V/3.3V MCU.
  • Compatible with 3.3/5V operation voltage level.
  • Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen).
Check Stock

10.1 Inch Ultra-Thin Security CCTV Computer Monitor 1024x600 Resolution Touch Buttons Video and Audio LED Color Display Screen AV/VGA/HDMI Input with Remote Control

  • ... dynamic contrast ratio delivers excellent details. Bright saturation image and high color reduction give you a pleasant visual enjoyment. Perfect choose to be used as CCTV monitor, PC monitor or gaming monitor. What's more, you can also use it as a mini size TV by connecting with a TV-stick, photo scanner or video display..
  • 【Multiple Interfaces & Multiple Functions】This small portable monitor provides a rich set of video input options - including 1x HDMI port for Raspberry Pi, DSLR, DVR or other devices with HDMI port use, by plugging with a TV-stick, you can use it as a small TV. 1x VGA port for computer or laptop use. 1x AV port for DVD,VCD,TV-Box or security camera which has AV protect..
  • 【Touch Button & Remote Control】The design of touch key make the operation more convenient,You can simply use the remote control to real-time control this monitor. Also NO button damage issue for after long time use. Multi language OSD menu can complete various settings, such as rotating the view of screen..
  • 【Energy Efficient】Environment friendly, the 10.1 inch LCD monitor is designed to meet Energy Star standards. Automatic sleep function reducing energy costs and conserving energy. 10.1" Inch CCTV Monitor Surveillance Display Screen TFT LCD+HDMI VGA AV ....
Check Stock

Smart Watches for Women ,1.69\ Full Touch Screen Fitness Watch with Heart Rate and Blood Oxygen,Sleep Monitor,IP67 Waterproof smartwatch Compatible for iPhone &Android (Black)

  • ⌚【1.69” Full Touch Screen&Custom Watch Face】This smart watch for women men features a 1.69 inch TFT-LCD color display for outstanding HD quality. Full touch screen technology makes your operation quick and easy. With 4 levels of brightness, you can also adjust the brightness to see the display clearly. After connecting with your phone, you can choose a lot of watch faces to replace or customize your own photos via the “Smartwristband3” APP..
Check Stock

DIYmalls 3.2 inch TFT Shield LCD Display Module 400x240 ILI9327 Resistive Touch Screen 5V onboard Temperature Sensor for Arduino UNO R3 Mega 2560

  • This 3.2 tft lcd display has 32 pin interface onboard, so connecting with uno r3 and mega 2560 is easy..
  • Onboard SD card slot help to use 3.2 inch touch screen more conveniently..
  • You will receive 1pcs resistive touch screen and 1pcs touch pen..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Monland 880 3D Printer MKS Gen-L V1.0 Controller Board 1Pas MKS Integrated Mainboard Motherboard Compatible with Ramps1.4

  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users....
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the....
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the....
Check Stock

GeeekPi Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Raspberry Pi Fan and Heatsinks, 320x480 Resolution LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)

  • This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
  • The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
  • The resolution of 3.5 inch touch screen can be adjusted by software.
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
  • It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
  • Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).
Check Stock