Top The Great Current Capacity

FITINOCH Flat Top Li-Ion18650 Battery Charger,2500mAh 30A Dischage Current Rechargeable High Drain 3.7v Batteries 2 Pack(US Shipping)

  • ✅【REAL 30A DISCHARGE CURRENT】Real 30A discharge current as original sms 25r battery..
  • ✅【REAL 2500mAh CAPACITY】Real 2500mAh capacity high drain as original sms 25r battery..
  • ✅【APPLICATION FOR COMMON AND HIGH CURRENT ELECTRONIC DEVICES】Not only for common current electronic devives but also Compatible with various high-current ones.
  • ✅【FAST U.S. SHIPPING】Fast ship from US warehouse. Response within 24 hours..
  • ✅【DIMENSION】Flat top 65*18*18 mm(please confirm the size before purchasing).
Check Stock

LiitoKala Lii-600 18650 26650 21700 AA AAA Battery Charger 3A Fast Charging Touch Button LCD Display Test The Battery Capacity for Li-ion and NiMH/Cd Battery.

  • 3A Fast Charging The maximum charging current of Lii-600 is 3000mA*4 Slots. The charger will automatically allocate the charging current, if you are not satisfied, you can manually select the charging current..
  • Touch button Lii-600 adopts the design of touch buttons, and it will send out a "beep" sound feedback when touched. Responsive and easy to operate..
  • Test battery capacity Press "MODE" key to select "TEST" mode. It takes some time to test the battery capacity, please be patient..
  • Repair battery Working principle: When the charger detects that the battery is losing power, it will allocate a small current to charge the battery/stop charging and observe the battery voltage change. The battery may be repaired multiple times. note. There is no guarantee that the battery will be repaired successfully..
  • Temperature monitoring Each tank has an independent temperature detection device. When the temperature reaches 65°C (149°F), the charger will lower the charging current by two gears. If the temperature still rises, the charging current will drop to the lowest gear. (Current gear: 250mA, 500mA, 1000ma, 1500mA, 2000mA, 2500mA, 3000mA).
Check Stock

E-outstanding 1PCS Thermal Circuit Breakers 25A Mini Size Thermal Overload Protector Push Button Switch

  • Made of durable plastic with high quality and long service life..
  • When the load exceeds the rated current, the switch reset button will automatically cut off the circuit to protect the circuit..
  • After you have been disconnected for a period of time, you can reset the switch, and then you can press the reset switch to use it again..
  • Suitable for automobile, industry, ship, etc..
  • Rated current: 25A. Input power: 125VAC / 250VAC / 32vdc, 50-60Hz. Withstand voltage strength: 1500vac / min. leakage current is less than 0.5mA. Rated short circuit capacity: 125VAC / 1000A, 250VAC / 1000A. Rated breaking capacity: 6 times rated current. Reset: manual push reset. Package includes: 1 25A thermal circuit breaker..
Check Stock

Digital Battery Tester Battery Load Tester Li-ion Battery Charge Capacity Tester LCD Battery Charger Checker Analyzer Tester Battery Capacity Performance Tester Device Mobile Power Head Test

  • 【BATTERY CAPACITY TESTER】EBC-A10H is an electronic load with charging function. It is suitable for charging and discharging capacitance test of various batteries, mobile power discharge test, charging head power performance test, support for connecting to computers, and more extended functions through online software..
  • 【AUTOMATIC CHARGING & DISCHERGE】Charging method is standard charging, support nickel hydrogen, nickel chromium, lithium, iron lithium, lead acid. Support automatic charging - discharge - charging mode for testing battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【VOLTAGE & CURRENT & CAPACITY TEST】Voltage test: 0.002V-4.5V (low voltage), accuracy is 0.003V, error ± 0.5%.
  • 4.5V-30V (high voltage), accuracy to 0.01V, error ± 0.5%. Current test: 0.05-10.000A, accuracy 0.005A, error ±0.5%. Capacity test: 10Ah, resolution is 0.001Ah.
  • Above 100Ah, resolution 0.1Ah. (Connection method: four-wire detection, separate wiring of voltage and current channels to ensure measurement accuracy.).
  • 【COMPUTER ONLINE】dedicated USB to TTL serial port (Mini USB interface, non-ordinary USB cable) computer control, curve drawing, calibration benchmark test, firmware upgrad....
Check Stock

DROK USB Tester, USB-A USB-C 2.0 Multimeter Dual USB Ports PD QC 3.0 with Color LED Display Battery Charger Monitor, 7 Modes Capacity Voltage Current Power for Laptop Power Bank Phone Solar Panel

  • 【7 Modes Display Monitor】 DROK USB Tester is equipped with digital color LED display screen, which can be switched between 7 display modes. This multimeter can be used to measure voltage, current, power, capacity. Through the 7 modes, you can clearly see the voltage, current, capacity and power during charging. Only one button to switch the display mode, simple and handy..
  • 【Dual USB Output】 This item is equipped with USB-A USB-C input and dual USB 2.0 output. The output ports support PD QC 3.0 fast charge protocol. This meter can auto identify the fast charge protocol, which can charge your mobile device among 3.6V to 12V 3A. Output Ⅰ can be used for device charging and data transfer, and output Ⅱ can only be used for charging..
  • 【Multifunction】 DROK USB detector can be used for capacity checking, capacity clear, over voltage, under voltage, over current and short circuit alarm, which is easy to test the power, quality and know the health condition of your device chargers or USB cables..
  • 【Easy to Use】 The multimeter only has Two button. Once you plug in the meter, you can test the parameter you want. The button Ⅱ can switch 7 modes display——VA(Voltage & Current), C(Capacity), P(Power), VA+C, VA+P, C+P, VA+C+P. When voltage ≥ 5....
Check Stock

DC Current Switch,Current Sensing Relay DC Current Sensing Switch 0-300A Amp Sensor Monitoring Relay D366

  • Basic Function:When the piercing current exceeds the set value, the output switch will act Automatically reset when the piercing current is less than the set value..
  • Set threshold: set the threshold when the perforation current exceeds the threshold, the relay will work, and when the perforation current is lower than the threshold, the relay will reset.
  • Indicator light: the indicator light is off when there is no current, the green light is on when the current is lower than the threshold, and the red light is on when the current is higher than the threshold.
  • Delay adjustment: power-off delay can be set from 0 to 99 seconds, clockwise to increase and counter-clockwise to decrease.
  • Detection range: 0-50A, [email protected] AC/DC contact capacity.
Check Stock

Voltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink

  • Realtime LED Display & Indicators --- The transformer board is designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
  • Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
  • Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
  • Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
  • 2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
  • 3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltage rises to the set voltage, turn on the appliances..
Check Stock

Tectra 6600mAh Battery Replacement for Wii U Gamepad Rechargeable Long Lasting Battery, Fix Dead Power Issue

  • ★ Rechargeable battery type: Lithium-ion. Capacity: 6600mAh. Voltage: 3.7V..
  • High capacity can late longer than the original battery, which brings you adequate game time for entertainment..
  • ★ Easily to open the of the gamepad with this screwdriver, our extended battery fits well for U Gamepad as the original battery. Come with a screwdriver, no need to purchase additional parts, easy and quick installation.
  • ★ No memory effect, High capacity Long Lasting battery for your gamePad. Constant current control to prevent over-voltage, over-charging, short-circuit protection.Soft-start function to avoid damage from large charge current while charging.
  • ★ Perfectly Compatible with Wii U Gamepad..
Check Stock

[2-Pack] High-Output 3600mAh Ni-Mh 18V HPB18 Battery [High Performance] for Black and Decker Firestorm Power Tools 18-Volt Battery 244760-00 A1718 FS18FL FSB18

  • 【LARGE CAPACITY】3.6 Ah Higher Capacity!!! | Voltage:18V | Battery Type:Ni-Mh. 2-Pack. This tool Battery has no memory effect, no content of toxic and harmful substances, high current charge-discharge capability, great energy density and long cycle life..
  • 【FULL COMPATIBILITY】Replacement battery for B&D NHT518, NPP2018, NPT3118, NS118.
  • perfect for HPB18 HPB18-OPE 244760-00 Firestorm Fsx-treme FS18HV FS18ID FSB18 FS18HV FS18PS FS18BX FS180BX FEB180S.
  • 【HIGH PERFORMANCE】Quality battery cells to ensure that all batteries are efficiency, reliability, safety and quality excellent. No memory effect, can be charged or discharged as needed without losing capacity..
  • 【SECURITY】It is double the power than standard 2Ah batteries, and against overcharging, over discharge, over current/ Support Fast Charge/ Steady voltage circuit / No memory effect..
  • 【RELIABLE GUARANTEE】ALL Futurebatt products coming with 30-day money back, 12-month guarantee against manufacturer defects, and 24/7 hours friendly customer service! we will do our best to serve for you. we offer 45 days money back, 12 months warranty..
Check Stock

[2Pack] 18V 6.0 Ah Replace Battery for Milwaukee M18 Lithium Battery 48-11-1860/48-11-1850/48-11-1840/48-11-1828/48-11-1820/48-11-1815

  • 【CAPACITY】6.0 Ah Higher Capacity!!! | Voltage:18V | Battery Type:Li-ion. 1pack. This tool Battery has no memory effect, no content of toxic and harmful substances, high current charge-discharge capability, great energy density and long cycle life..
  • 【COMPATIBILITY】2 PACKs Replacement Battery for Milwaukee 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828 , 48-11-1840, 48-11-1841, 48-11-1850, 48-11-1852 48-11-1860 cordless tools. Compatible with all Milwaukee M18 /18V XC batteries and lithium-ion chargers..
  • 【Four LED Indicator Light】 Allows Users to Conveniently Monitor Charge Levels. Displays remaining running time for less downtime on the job,You can see how much fuel the battery has charged up with the LED panel on the side, keeping you aware of when you need to recharge.
  • 【SECURITY】It is double the power an load that the 3.0 XC batteries are delivering, and against overcharging, over discharge, over current/ Support Fast Charge/ Steady voltage circuit / No memory effect..
  • 【RELIABLE GUARANTEE】ALL Futurebatt products coming with 30-day money back, 12-month guarantee against manufacturer defects, and 24/7 hours friendly customer service! we will do our best to serve for you. we offer 45 days money back, 12 months warranty..
Check Stock

Hoshizaki TS005 Thermistor w/ Seal

  • The NTC thermistors are reliable and stable, with wide range of over-current control..
  • With small size and large power, they have strong capacity to inhibit surge current..
  • Large material constant, large B value, with small residual resistance..
  • Thermal shock resistance, with wide range of operating temperature..
  • Used for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

ALL-TEST PRO Motor Genie Deenergized Motor Circuit Analysis Testing Instrument

  • Accurate measurement: In order to improve the accuracy of voltage measurement,Battery capacity testers circuit is specially designed for DC bias. When the terminal is not connected at all, it will display a small voltage, which does not affect the actual measurement.
  • Size:Discharge testers board size is 5x3.4 cm/1.97x1.34 inch, small, easy to carry and store.
  • Power supply voltage:Battery capacity meters power supply voltage: DC4.5-6V (micro USB interface), working current: less than 70mA. Supported current: no more than 3.000A resolution 0.001A.
  • Discharge voltage:Battery meter testers discharge voltage: 1.00V-15.00V, resolution 0.01V. Termination voltage range: 0.5-11.0V.
  • Battery capacity:Battery meters battery capacity range: 9999Ah (1Ah=1000mAh). When the value is large, it is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it reaches 10Ah, it is displayed as XX.XX..
Check Stock