Top Thermal Conductive Release Sheet

Noctua NH-D15 chromax.Black, Dual-Tower CPU Cooler (140mm, Black)

  • SAFETY APPLICATION: SYY is metal-free and non-conductive, which eliminates any risk of short circuit and adds more protection to the CPU and VGA card..
  • BETTER THAN LIQUID METAL: It is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated..
  • THERMAL COMPOUND: SYY thermal paste 2022 edition has excellent component heat dissipation performance and has the stability to push the system to the limit..
  • EASY TO APPLY: SYY thermal paste has ideal consistency and is very easy to use even for beginners..
  • HIGH DURABILITY: In contrast to metal and silicon thermal conductive adhesives, SYY thermal paste 2022 will not compromise over time. After applying, you do not need to apply again because it will last at least 5 years..
Check Stock

Smalloo 1.2'×80ft Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks, LED Lights, IC Chip, Computer CPU, GPU, Raspberry pi, Modules

  • The 1.2"×80ft(wideth×length) double side adhesive thermal conductive tape for heatsink, like heatsink for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated..
  • The thermal conductive cooling tape thermal conductivity: glass fiber thickness 0.2mm, 1.5 W/m-k. Long term heat resistant 120°C, short term heat resistant 180°C.
  • The thermal adhesive with the features of high thermal conductivity, insulation, strong stickiness, softness, compression..
  • The thermal adhesive tape is simple and practical , Combined with thermal paste, the effect will be better and very easy to use..
  • Double-sided thermal adhesive tape at low cost solve the problem of heat dissipation, it is great helper to solve heat dissipation for many electronics products..
Check Stock

Wathai 100x100x3mm Blue Thermal Conductive Silicone Pad For CPU GPU IC PS3 PS2 Xbox Heatsink Cooling

  • Thermal Pad is an upgraded version of the thermal grease Paste, good thermal conductivity, Soft a little sticky, super electrical insulation, it can be arbitrarily cut size..
  • it has good thermal conductivity and electrical insulation properties,good stability,wide use of temperature,in -40 ℃ -200 ℃ range does not melt.
  • You can according to the size of the gap between the heating element and the heat sink to select the appropriate thickness of the thermal silica Pad, the size of the self-cutting..
  • Thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect..
Check Stock

Thermal Grizzly Carbonaut – Carbon Thermal Pad – Non-Adhesive, Flexible and Reusable – Very High Thermal Conductivity – Conducts Electricity (31 × 25 × 0,2 mm)

  • Those thermal pads are made from a carbon-based polymer with nanoparticles.
  • They have a high thermal conductivity of 62.5 W/mk.
  • The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
  • The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
  • The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
  • Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
  • Carbonaut is an electrical conductor – avoid contact between thermal pad and transistors or transformers.
Check Stock

Gelid Solutions GP-Extreme 12W-Thermal Pad 80x40 (2pcs) Excellent Heat Conduction, Ideal Gap Filler. Easy Installation. (80x40x2.5 (2pcs))

  • 10 gram high performance thermal glue with strong adhesion..
  • Premium thermal conductive glue for bonding the interface of cooler heatsink and GPU VRM VRAM PCB LED, BJT MOSFET transistor, Voltage regulator, IC Chips, etc.
Check Stock

JLJ Thermal Paste 1.5g CPU Paste Thermal Compound Paste Heatsink for IC/Processor/CPU/All Coolers Carbon Based High Performance Thermal Interface Material CPU Thermal Paste

  • SAFE APPLICATION: The JLJ thermal paste is metal-free and non-electrical conductive, which eliminates any risk of short circuits and adds more....
  • BETTER THAN LIQUID METAL: High Thermal Conductivity, it is composed of carbon particles and has extremely high thermal conductivity. It ensures that....
  • HIGH DURABILITY: In contrast to metal and silicon thermal conductive adhesives, JLJ thermal paste 2022 will not compromise over time. After applying,....
  • COMES WITH A TOOL KIT: JLJ thermal paste has the perfect consistency, it also comes with a tool kit including 2 types of applicators, 4 types of....
  • PERFECT CHOICE FOR EVERYONE: Widely recognized by enthusiasts and influencers in major forums, buy better products at lower prices, JLJ thermal grease....
Check Stock

100Pcs 20x20x1mm Thermal Conductive Pads for Heatsink IC Chipset Northbridge GPU Heatsink

  • Thermal Conductivity: 1.5w/m-K,Material: conductive silica gel, Package include:100pcs 20x20mmx1mm Thermal Pads..
  • Note:It's sticky thermal pads, the surface of many products is smooth, vertical or inclined, you can choose our sticky thermal pads, it can stick....
  • Because the back of the conductive thermal pads is sticky (we use high viscosity double-sided adhesive tape on the back), it will be a little....
  • These pads are for lower heat producing processors(raspberry pi,ps4 etc), memory chips and IC's. These pads are NOT meant to handle the high heat....
  • Use experience: the effect of using on CPU is not very good but the heat dissipation on North/South Bridge is good. Experiment: notebook bare plate....
Check Stock

LLPT Double Sided Thermal Tape Strong Adhesive Multiple 1.2 Inches x 108 Feet for Electronic Components LED Strips Heat Sinks(TC128)

  • easy mountings to replace screws for electronic components to increase the work efficiency, printing industry, filling gap on uneven surfaces of electronic components for tight fit, holding LED strips and etc..
  • MATERIAL: LLPT double sided thermal conductive tape is a combination of fiber glass that fills conductive ceramic powder for high efficiency and flexibility of thermal conduction & insulation.
  • coated with strong Acrylic adhesive, removable, repositionable and residue free for easy mountings to save time and work better on electronic..
  • EASY USE: Ideal to mount heat sink to IC chip, fit parts to heating source devices and hold LED strips.
  • clean the dust before application and cut the size as needed, stick and compress the tape, then take off the blue backing film liner by hand to mount another part. The removable property is to allow reposition after application without any damages to components. Avoid finger prints on adhesive layer for strong holding..
  • FEATURE: LLPT Thermal Conductive tape has high thermal conductivity, insulation, strong adhesive, flexibility, compression, high tensile....
Check Stock

Liquid Metal Thermal Paste, 79 W/mK High Performance, Silver King Heatsink Paste for All CPU Coolers, 1 Grams with Cleanser and Spreader

  • [High thermal conductivity]: thermal conductivity: 79 W/MK. It guarantees that heat generated from the CPU or GPU is dissipated efficiently..
  • [Top performance]: conductor is recommended for users who are looking for a top performance product with best heat dissipation..
  • [Warning]: Electrically conductive liquid metal is for experienced users, beginners can learn to use it on youtube or use non-electrical conductive thermal paste instead..
  • [Note]: This thermal grease must not be used with aluminum heatsinks!.
Check Stock

GENNEL 10g Thermal Conductive Glue Heatsink Glue Thermal Adhesive for 3D Printer LED PC and Various Electronic Components That Need to Be Bonded - G109

  • GENNEL thermal conductive glue has good thermal conductivity, strong adhesion to most metals and plastics, non-toxic, moisture-proof, non-swelling,....
  • Suitable for 3D printer's, LED, heat sinks, power supply, transistor, north-south bridge, PC, electrical appliances and various electronic components....
  • Do not use thermal glue between the “CPU and heat sink”! Because the thermal glue is difficult to separate after curing, forced separation may....
  • The thermal conductive glue begins to cure after being exposed to air. Drying time: [25°C] about 24 hours, it is recommended to stand for a long....
  • The curing speed of the thermal glue is related to the relative humidity and temperature in the air. The higher the temperature, the faster the curing....
Check Stock

Nab Cooling Thermal Pad 15 W/mK 90x50 Heat Resistance Non-Conductive High-Temperature Resistance Silicone Thermal Pads for Laptop Heatsink GPU CPU LED & PS4 90x50x1.0

  • Extreme Thermal Conductivity: With a thermal conductive value of 15W/mK, Nab Cooling’s thermal pad promises extreme thermal conductivity and reduces....
  • Easy installation: Unlike other thermal adhesives, the NB Supermax cooling pad is super easy to use. Just remove the plastic film, paste it on the....
  • Non-electrical conductivity: This silicon thermal pad GPU contains no metal and hence, is non-electrical conductive, which makes it safe to use. It....
  • Wide operating temperature range: NB Supermax thermal adhesive pad has an operating temperature of -60℃ to +220℃, making it compatible with a wide....
  • Safe to use: This thermal gap filler comes in 5 different thicknesses and is non-corrosive, non-toxic, non-curing, and odorless, making it super safe....
Check Stock

Thermal Pad,100x100x1.5mm 6W/mk Thermal Conductivity,with Good efficient Heat Dissipation Performance,for Laptop Heatsink/CPU/GPU/SSD/IC/LED Cooler

  • ✔Good Heat Dissipation：Perfect To Filled Contact Surfaces Gap, effectively improve the heat transfer efficiency, improve the heat transfer between....
  • ✔Application：Thermal Pad used in the control board of electronic and electrical products.
  • Pads and foot pads inside and outside the motor.
  • ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature....
  • ✔In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.It Can Be....
  • ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is....
Check Stock