Top Thermistor 3d Printer

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

  • ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
  • Designed for many common types of 3D printers, solid aluminium construction with aperture..
  • ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
  • ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
  • ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.
Check Stock

300 X 300mm (Approx. 12' X 12') 120V 750W, KEENOVO Universal Flexible Silicone Heater Mat/Pad, 3D Printer Heated Bed Heating Element

  • Wonderful silicone heater for your 3D printer heat-bed. Fast Heating with 5.2W per square inch..
  • surface mount NTC 100K thermistor ( R-T table available).
  • 3M adhesive backing offers excellent and easy mounting..
  • Versatile and may be used in many other applications..
Check Stock

Genuine E3D Hotend Thermistor Cartridge Replacement

  • Direct replacement of cartridge type thermistor in E3D hotends..
  • A custom made thermistor encapsulated into an easy to use cartridge package..
  • Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm).
Check Stock

24V 40W 620 Ceramic Cartridge Heater with 3950 100K NTC Thermistor with 1 Meter Wiring for RepRap 3D Printer Heatbed Hot End

  • 1 Meter long wire with high temperature PTFE insulated wiring and female pin head, 1.25mmx2.0mm glass bead.
  • Temperature sensor 100KΩ accuracy of ± 1%.
  • 24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa....
Check Stock

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

  • 1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer.
  • 2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level.
  • 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock..
  • 4.Direct drive extruder, great support for flexible filament..
  • 5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase..
Check Stock

KEENOVO Circular/Round Silicone Heater Pad,Dia 400mm 900W 120V, with 3M PSA & NTC 100K thermistor for Huge Delta 3D Printer HeatedBed or Steel Tank Bucket Container Bottom Heater

  • Excellent heat source for your 3D printer heatbed,900W 120V.
  • Heats up fast, and 3M PSA for easy mounting.
  • Can be Versatile and serve your other heating applications.
  • With Surface mount NTC thermistor 100K-3950K-1% (R-T table available).
Check Stock

3D Printer Silicone Heated Pad, Heating Plate 310x310mmx1.5mm, 120V 750W for Creality CR-10 /CR-10S 3D Printers Heater Bed with Screw Holes /3M Adhesive

  • Wonderful silicone heater for Creality CR-10 /CR-10S 3D printer build plate heating..
  • Rated at 5 watts per square inch with fast and even heating.
  • Equipped with NTC 100K thermistor (Beta 25/50 3950K-1%) as temperature control sensor which is supported directly by Marlin firmware..
  • 3M adhesive backing offers excellent and easy mounting onto most surfaces..
  • Versatile and may be used in many other applications..
Check Stock

MakerHawk 5pcs Aluminum Heater Block for MK7 / MK8 3D Printer and 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and 5pcs 12V 40W 620 Ceramic Cartridge Heater for 3D Printer

  • 3d printer heater block: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)..
  • 12V 40W 620 Ceramic Cartridge Heater: Resistance: Material: 304 stainless steel.
  • 2080 high temperature resistant high quality....
  • NTC 3950 100K Thermistor: For 3D printers: use TEMP_SENSOR 11 in Marlin firmware.
  • Cartridge Heater: The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the....
  • We have a strong after-sales team, if you have any questions, please feel free to email us. Click on "MakerHawk-US",then "Ask a question".We will....
Check Stock

KEENOVO Circular/Round Silicone Heater Pad,Dia 10" 400W 120V, with 3M PSA & NTC 100K thermistor for Kossel Style & Delta 3D Printer HeatedBed or Steel Tank Bucket Container Bottom Heater

  • Excellent heat source for your 3D printer heatbed,400W 120V.
  • Heats up fast, and 3M PSA for easy mounting.
  • Can be Versatile and serve your other heating applications.
  • With Surface mount NTC thermistor 100K-3950K-1% (R-T table available).
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock