Top Thermocouple Thermometer

Fluke BC-7240 Battery Charger/Eliminator, For 75X Documenting Process Calibrator

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
  • Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
  • 12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
  • Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
  • CE mark indicates compliance with applicable EU directives.
Check Stock

Fluke 53-2 Single Input Digital Thermometer with USB Recording, 3 AA Battery, -418 to 3212 Degree F Range, 60 Hz Noise Rejection

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Stores up to 500 points of data for analysis and monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

Wintact Infrared Thermometer Gun -58℉ to 1202℉ Pyrometer IR Laser Thermal Gun for Mould Detection, Ambient, Surface Temp, Humidity with Automatic Dew Point Temperature Alarm, K-Type Thermocouple Probe

  • EASY TO USE: you to quickly detect areas prone to mildew growth with a simple scanning motion and without direct surface contact, It also has a Type K thermocouple probe to take contact measurements.
  • WIDER TEMPERATURE RANGE: infrared from -58℉~1202℉(-50℃~650℃), Type-K thermocouple probe from -40℉~932℉(-40℃~500℃), Adjustable emissivity from 0.1 to 1.0.
  • ACCURATE: With a distance to spot ratio of 12:1, this IR thermometer features 9-point lasers for a better indication, super quick response time at less than 500 ms, accurate up to ±1.5%.
  • FOUR MODE DISPLAY: Infrared Thermometer built-in hygrometer with a tricolor light indication as reading goes close to dew point temp, and read ambient air temp, relative humidity, and dew point on the large multi-line backlit LCD display.
  • MULTIFUNCTION: This laser thermometer with switch ℃/℉ and UV light, data hold, low battery indicator, auto-off function for home and industrial settings, cooking food, oven baking, grilling, freezing, brewing, HVAC, Automotive repair, and more.
Check Stock

K-Type Scientific Digital Thermometer DM6801 with high Temperature thermocouple PK-1000

  • Digital k-type thermometer with one input and extra thermocouple PK-1000.
  • Temperature Range: -58.0 to 1999.0 °F (-50.0 to 1300.0 °C).
  • Resolution: 0.1°F or °C or K Accuracy: 2.2° or 0.75% Data Hold.
  • Comes with k-type thermocouple wire probe that measures up to 1832 degree fahrenheit (1000 degree Celsius).
  • Battery: 9V (included!) Dimensions: 6" x 3" x 1.5" (149 x 71 x 41 mm) Weight: 7 oz (200 g).
Check Stock

Thomas Traceable Total-Range Thermometer, -328 to 2498 degree F, -200 to 1370 degree C

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or - 0.2 degrees C.
  • Type K thermocouple probe with 4-foot cable.
  • Minimum/maximum memory and 24-hour countdown timer for long-term temperature monitoring.
  • Calibrated to ISO 17025 traceability standards for reliability of measurements.
Check Stock

Amprobe TMD-50 Thermocouple Thermometer K-type

  • Portable, dual-input thermometer for reading temperatures from two sources simultaneously, and is used in quality control and HVAC, electrical, industrial, and automotive maintenance.
  • Dual-scale temperature readings range from -328 to 2,498 degrees F (-200 to 1,370 degrees C).
  • Dual-input thermocouples for superheat and subcool applications, and cut-out and cut-in temperature measurements, and offset mode compensates for thermocouple error.
  • Backlit LCD screen with a data hold feature to save temperature readings for later viewing, maximum and minimum temperature with elapsed time, average and relative temperature calculations, and low battery indicator.
Check Stock

Supco EM60 Dual-Channel Differential Digital Thermocouple Thermometer with Probes, -200 to 1300 Degrees C, -328 to 2372 Degrees F, Accuracy of + or - 0.1% of reading + 0.7 Degree C

  • Digital thermometer with probes for applications requiring a broad range of temperature measurements, including superheat measurements, food service applications, and heating, ventilation, and air-conditioning system maintenance.
  • Measures temperature from -200 to 1300 degrees C (-328 to 2372 degrees F), with a best accuracy of + or - 0.1% of reading + 0.7 degree C (1.4 degrees F).
  • Accepts K-type thermocouple probes, for a broader temperature measurement range than a thermistor sensor, or J-type thermocouple probes, for higher accuracy than K-type sensor.
  • Dual-channel thermometer with two inputs for measuring the temperature of two samples at the same time.
  • Displays current temperature for either input channel, the highest or lowest temperature reading for a session, or the difference between the two channels.
Check Stock

Fluke 568 Dual Infrared Thermometer, -40 to +1472 Degree F Range, Contact/Non Contact

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in electrical maintenance and monitoring industrial and manufacturing processes.
  • Measures temperature with the infrared sensor from -40 to +800 degrees C (-40 to +1472 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F).
  • Measures temperature with the included Type K bead thermocouple from -40 to +260 degrees C (-40 to +500 degrees F).
  • 50:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area.
  • Stores up to 99 points of data for analysis and monitoring on a computer.
Check Stock

Cooper EconoTemp 32311-K EconoTemp Thermocouple Thermometer, Type K, -40 to 500 Degrees F Temperature Range, Multicolor

  • Dual-range digital Type K thermocouple thermometer for use in monitoring temperatures of food products.
  • Measures temperature from -40 to +500 degrees F (-40 to +260 degrees C), with an accuracy of + or - 2 degrees F (1 degree C) at ambient temperatures 68 to 86 degrees F (20 to 30 degrees C).
  • Accepts standard Type K thermocouple probes (sold separately).
  • Molded rubber casing provides impact and water resistance.
  • CE mark indicates compliance with applicable EU directives, and NSF listing indicates compliance with applicable safety standards.
Check Stock

FLUKE FLUKE-62 MAX+ INFRARED THERMOMETER, -30C to +650C / -22F to +1202F

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in electrical maintenance and monitoring industrial and manufacturing processes.
  • Measures temperature with the infrared sensor from -40 to +800 degrees C (-40 to +1472 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F).
  • Measures temperature with the included Type K bead thermocouple from -40 to +260 degrees C (-40 to +500 degrees F).
  • 50:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area.
  • Stores up to 99 points of data for analysis and monitoring on a computer.
Check Stock

uxcell LCD K-Type Digital Thermometer TM-902C W Thermocouple Wire

  • Size : 10.8 x 7.2 x 2.3cm / 4.3″ x 2.7″ x 0.9″ (L*W*T).
  • Package Content : 1 x Digital Thermometer, 1 x 9V Battery.
  • 1 x K Type Thermocouple Wire, 1 x Instruction Book.
Check Stock

ThermoPro TP18 Ultra Fast Thermocouple Digital Instant Read Meat Thermometer for Grilling BBQ Smoker Kitchen Food Cooking Thermometer for Oil Deep Fry Candy Thermometer

  • Ultra-fast and accurate: Kitchen thermometer features advanced thermocouple technology that provides 2-3 seconds response time.
  • 4 inches food grade probe thermometer guarantees an accurate temp reading to ±0.9°F with a wide temp range of 14°F - 572°F.
  • Lock Function: Digital meat thermometer for grilling can lock the current temp when the probe is removed from food and keep the temp displayed, no more dangerously peering into the oven or grill.
  • Large backlit display: Cooking thermometer features backlight LED display with large luminous digits to let you see clearly while cooking in the evening indoors or outdoors.
  • 90 seconds auto-off to save battery life.
  • Convenient storage: Digital thermometer for cooking with foldaway probe, features a magnetic back to allow you to easily attach to refrigerator or any metal surface.
  • a hanging hole for your kitchen hooks or a lanyard.
  • Calibration: Calibration function adjusts your instant read thermometer probe sensor back to the correct accuracy, making this instant thermometer which lasts a lifetime.
Check Stock