Top Thermostat Flange

Loctite 5699 RTV High Performance Silicone, Grey, 190 ml

  • QUALITY. Remains flexible and withstands high vibration, low odor, noncorrosive, outstanding oil resistance and resists auto and shop fluids..
  • DESIGN. High torque applications the product exceeds manufacturers’ performance requirements..
  • EASY TO USE. Flexible gaskets directly on the flange and easy to apply..
  • TEMPERATURE. The temperature range is -75°F to 625°F (-59°C to 329°F) intermittent..
  • APPLICATIONS. Valve covers, oil pans, intake manifold end seals, timing covers, water pumps and thermostat housings..
Check Stock

FireplaceBlowersOnline FBK-250 Fireplace Blower Kit for Astria, Lennox and Superior, Rotom HB-RB250 | Ball Bearing, Quiet, High Air Flow, Energy Efficient

  • Kit includes 100% ball bearing blower, 3-prong power cord, rheostat variable speed controller and thermostat. Also includes galvanized mounting bracket, noise reduction padding and installation instructions.
  • Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA.
  • Total Length = 13.63″ x 4.63″ x 4.5″ | Blower Length = 12.5″ Width = 3.73″ Height = 3.23″ Flange Opening = 9 1/2″ | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CCW Rotation, Magnetic 120° / 90° Thermostat, Class H Motor Insulation (rated to 392°F / 200°C).
  • High Quality Sealed Ball Bearing Motor – Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
  • Does it fit your fireplace? See our compatibility chart in description. If you don’t see your model listed or have installation questions, please contact us directly..
Check Stock

GFK4 Fireplace blower kit for Heatilator, Majestic, CFM, Vermont Castings, Monessen; Rotom #HBRB74K

  • Includes ball bearing blower, 3-prong power cord, rheostat variable speed control, and thermostat.
  • Velcro mounting strips, noise reduction padding, and installation instructions are included.
  • Total Length = 12.5″ Width = 3.23″ Height = 3.73″ Flange Opening = 9 1/2″.
  • Designated wall switch for blower NOT REQUIRED.
Check Stock

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

FireplaceBlowersOnline BLOT BLOTMC Fireplace Blower kit for Majestic Martin Monessen and Vermont Castings | Ball Bearing Quiet High Air Flow Energy Efficient

  • Kit includes 100% ball bearing blower, 3-prong power cord, rheostat variable speed control and automatic thermostat. Also includes high temperature....
  • Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI....
  • Total Length = 15.0" Width = 4.0" Height = 3.5" Flange Opening = 12.5" | 160 CFM, 3000 RPM, 120 Volts, 60 Hertz, 52 Watts, CCW Rotation, Class H Motor....
  • 100% Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
  • Does it fit your fireplace? See our compatibility chart in description. Makes for an excellent universal fit blower kit! If you don't see your model....
Check Stock

Fielect 2Pcs KSD301 Thermostat 150°C/302°F Normally Closed N.C Adjust Snap Disc Limit Control Switch Microwave Thermostat Thermal Switch

  • 【Type】- KSD301 150 degrees Celsius Thermal Control Switch 250V 10A.
  • 【Normally Closed】- The original state of KSD301 temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature 150 Celsius degree.
  • 【Advantage】- KSD301 Thermostat has double metal chip, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon..
  • 【Easy to installation】- The flange on temperature control switch is float and easy to install..
  • 【Wide applications】- Mainly used for microwave,oven, coffee maker,Speed Cook oven,heater,gas furnace, Heater,wall heater, water bottles, coffee shell, electric iron, dryer, air conditioning, water heater..
Check Stock

FireplaceBlowersOnline FK24 Fireplace Blower kit for Majestic Martin Northern Flame Temco Vermont Castings CFM Rotom HB-RB65 | Ball Bearing Quiet High Air Flow

  • Kit includes ball bearing blower, 3-prong power cord, rheostat, thermostat, galvanized mounting bracket, noise reduction padding and installation....
  • Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI....
  • Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CW Rotation, 120° /....
  • High Quality Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting.
  • Does it fit your fireplace? See our compatibility chart in description. Makes for an excellent universal fit blower kit! If you don't see your model....
Check Stock

Cool Attic CX1500UPS Power Gable Ventilator Fan

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
  • GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers.
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
  • EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof.
Check Stock

Hongso GZ550 Replacement Fireplace Blower Fan KIT for Continental, Napoleon, Rotom HB-RB58

  • Includes blower fan unit, 3-prong power cord, connecting wire, rheostat & thermostat, galvanized mounting bracket, noise reduction padding & installation instructions. Wall switch for blower NOT REQUIRED.
  • Blower total Length = 9.75" Width = 3.73" Height = 3.23" Flange Opening = 7". Insulation: Class H (rated to 392F / 200C), Motor RPM: 2500, Airflow in C.F.M: 125, Volts: 120, 0.6 Amps, Frequency (hertz): 60, Power Consumption (watts): 31, Certifications: Motor UL Approved.
  • Cross Reference Numbers: Blower only, GZ550, GZ552, HB-RB58, R7-RB58, P58L180, GD36NTR.
  • Durable Replacement Fireplace / Stove Blower Fan Kit for Continental Napoleon Rotom and other brands. Fits Continental Fireplaces: CDV33, CDV34, CDV36, BCDV40, BCDV42, BCDV48, CDV70, BCNV36, BCNV40, BCNV42, CVF42.
  • Benefits: Helps reduce costly energy bills, Heats large rooms efficiently, Installs quickly and easily with included instructions, Reasonable price aftermarket parts..
  • NOTE: The "Fits" BRAND and MODEL # Listed below are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order.
Check Stock

Nenesupply 19mm Flange Insert Compatible with Elvie Flange Pump Parts Elvie Stride Flange Medela Spectra Momcozy Flange Willow Reduce 24mm to 19mm Use as Elvie Inserts Medela Insert Momcozy Insert

  • CONTENT: 2pc 19mm NENESUPPLY Silicone Flange Inserts compatible with 24mm of Elvie flange, Elvie Stride flange, Momcozy flange, Medela flange (Personalfit Flex and Freestyle Hands-Free), Spectra flange, Willow flange, Willow Go flange, and Motif Luna flange. Reduce 24mm to 19mm. MADE BY NENESUPPLY. Compatible with Elvie pump parts accessories and Willow pump parts..
  • COMPATIBLE PUMPS: Work with 24mm FLANGES of most breast pumps in the market. See product photo for illustrations..
  • AVAILABLE IN 15, 17, 19, 21mm. MADE FROM SOFT SILICONE: Soft silicone makes pumping more comfortable. Reduce flange funnel to 19mm. Suitable for moms with smaller nipples. Correct flange sizes make pumping more efficient..
  • NO LOSS OF SUCTION- Embeded sealing circles creates a complete seal. EASY TO INSTALL & REMOVE - Easy to push in and pull out the inserts. Hassle-free.
  • EASY TO CLEAN: Dishwasher safe (top rack only). BPA and DEHP Free. FDA compliant for food contacts. Made by FDA regulation compliant manufacturer..
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator with 2.6-Amp 60-Hz Motor and 14-Inch Blade

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 1,850 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable - all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

bliblo Flange Insert 19mm Suitable for Momcozy S9/S10/S12,Wearable Breast Pump Shield/Flange Insert，Milk Collector 24mm Universal (19mm)

  • Bliblo Flange Insert 19mm, wearable breast pump flange suitable for almost any wearable breast pump, for example S9/S10/S12 breast pump. Milk Collector 24mm common use. 3 Piece Set.
  • Easy Cleaning, wash the accessories with warm soapy water everytime after using..
  • Flange Insert 19mm：made of food grade silicone material. Can be sanitized with water steam, boiling water or microwave-steam bags. Furthermore, flange Insert are 100% BPA free..
  • Mothers will experience nipples swelling during breastfeeding, therefore nipples might be uncomfortable. Nipples Rubbing or feeling flattened in the flange tunnel, or oversize flange will cause the amount of breast milk falls. Therefore, it is important to observe the appearance of the nipples during breastfeeding. Suitable flange inserts for breast pumping will be more comfortable and efficient. Please choose a flange with a suitable size..
Check Stock