Top Thin Shim Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

EFI Fuel Injected Motorcycle Gas Tank Frisco Mount Shallow Tunnel 2.5 Gal Sportster Bobber Style Harley Davidson Nightster Iron Low Forty Eight SuperLow Chopper Custom XL 883 1200 XL883 XL1200 07-2020

  • Excellent Quality ( Not Made in China ) New Motorcycle Gas Tank Frisco Tunnel EFI Fuel Injected Harley Sportster 2007 to 2020 XL 883 1200 XL883 XL1200.
  • Frisco tunnel Utilizes stock fuel pump and Stock fuel cap, Rear of tank reduced 1” from stock.
  • 2.5 gal capacity / 15" long x 9.25" wide x 7.75" tall low shallow Frisco tunnel.
  • Thanks for Looking at our Quality items, Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • The Frisco style gas tank is a throwback to sixties show bikes. Sportster tank is a direct bolt on for 2007 and up Sportsters which use electronic fuel injection (EFI). The custom tank will use the stock fuel pump and gas cap and is a direct bolt on part. No drilling, welding or fabrication of mounting points is required. The notorious flat spot removed from the top of the tank. This is a Frisco mount tank so it will sit high up on the back.
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

12 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness Metal Shims Brass Sheet

  • ✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness..
  • ✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ ---- Metal shims brass sheet widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔ ---- If you are a lover of DIY crafts, you should prepare this brass strip, because it is indeed widely used and multifunctional, you will definitely use it..
Check Stock

JAVIKA 0.005 x 6 x 100 inches Brass Shim Stock Roll Half Hard Cold Rolled CDA 260 Brass Alloy for Hardware and Machine Maintenance DIY Projects Jewelry Crafts Electrical

  • Brass Shim Stock Roll is made from a half hard, cold rolled, CDA 260 brass alloy with Low Friction and Good Corrosion Resistant..
  • Sieze: 0.005" Thickness x 6" Width x 100" Length. We have 4 thicknesses to meet your different needs..
  • The half-hard copper and zinc alloy material makes the shim rust-resistant for long-lasting performance..
  • Brass Sim Stock's softness and low melting point make it suitable in a broad range of applications, particularly in machinery. They are useful in creating accurate alignments, leveling surfaces, filling gaps, and more..
  • This product is Made in Taiwan, and has been tested for quality and reliability. Packing with a carton box..
Check Stock

WANLIAN Harley Fuel Caps, OEM Compatible with 1996-2015 Harley Davidson Sportster 48 883 XL1200 Scooter Motorcycle Gas Cap Fuel Tank Screw Thread(POP-UP-Bronze)

  • Excellent Quality ( Not Made in China ) New Gloss Black Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Cyleto Front Fork Oil Seal Kit 36mm x 48mm x 8mm for Kawasaki KZ750 KZ 750 1980-1982 KZ700 1984

  • Average horsepower increases of 15%-25%!.
  • Each DynoJet kit is precisely engineered to provide a simple and cost effective solution for all your riding needs.
  • Kit includes jets, needle, spring, shim and instructions.
  • Stage 1: stock engine/filters, stock/modified pipes.
  • Stage 3: stock/mild modified engine, stock/modified pipes, individual air filters.
  • drivability may be compromised, N/A for some motors.
Check Stock

Chrome Vented Gas Cap Motorcycle Tank Peanut Style Sportster Bobber Harley Davidson Dyna Electra Chopper Bayonet Cam Fuel Caps Custom Bike Builder Shovelhead OEM 61103-36 DS 139552 61102-73 75-003 005

  • Excellent Quality ( Not Made in China ) New Chrome Vented Cam Bayonet Gas Cap Bobber Motorcycle Fuel Tank.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chromed steel. An inexpensive cap that does the job and works with stock ('36 - '82) and aftermarket gas tanks with the bayonet style bung. This vented cap will work on single-cap model gas tanks or for the right-side gas tank on dual tank models gas cap Replaces Harley-Davidson OEM # 61103-36.
  • Chrome Vented Gas Cap for HarIey Gas Tank & Peanut Tank Bobber Style Cap 73-82.
  • Thanks for Looking at our Quality items,Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
  • Chrome Bayonet Cam Harley stock style Vented Gas Cap Shovelhead FL Sportster FX These bayonet style gas caps (also known as cam gas caps) are vented and are chro....
Check Stock

Screw-in Ratcheting Chrome Vented Gas Cap Motorcycle Tank Sportster Bobber Harley Davidson Dyna Chopper Fuel Caps Bike OEM 61272-92A 91A Drag Specialties 139568 390281 V Twin 38-0325 Softail 1996-2017

  • Excellent Quality ( Not Made in China ) New Chrome Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Chrome Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are chromed steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Screw-in Ratcheting Gloss Black Vented Gas Cap Motorcycle Tank Sportster Bobber Harley Davidson Dyna Chopper Fuel Caps OEM 61272-92A 91A Drag Specialties 139568 390281 V Twin 38-0325 Softail 1996-2017

  • Excellent Quality ( Not Made in China ) New Gloss Black Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Locking Screw-in Ratcheting Chrome Vented Key Lock Gas Cap Motorcycle Tank Sportster Harley Davidson Dyna Chopper Similar Fuel Caps 03-0320A-A Drag Specialties 141892 Softail 1996-2017 J&P 7200843

  • Excellent Quality ( Not Made in China ) New Chrome Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Chrome Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are chromed steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

Knurled Screw-in Ratcheting Gloss Black Vented Gas Cap Motorcycle Tank Sportster Bobber Harley Davidson Dyna Chopper Fuel Caps 61272-92A Drag Specialties 0703-0817 390281 V Twin 38-0325 Softail Knurl

  • Excellent Quality ( Not Made in China ) New Gloss Black Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are Gloss Black steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock