Top Thread Brass Valves

Hourleey Brass Garden Hose Splitter (2 Way), Solid Brass Hose Y Splitter 2 Valves with 2 Extra Rubber Washers (2 Pack)

  • ...valves, can be closed tightly to ensure no water leak from the garden hose separator connector part. All the hose bib splitter valve can be turned on and off individually, using one or more valves according to your need, greatly enhance the user convenience with freely switch..
  • Notes: The size of all male and female thread connect are 3/4 inch. Please using the tape wrap the thread to ensure no water leak in your need. If you have any questions, let us know and we will help you within 24 hrs..
Check Stock

Mtsooning 10PCS Air Pneumatic Flow Control Mufflers 1/4inch Exhaust Muffler Filters Bronze Thread Hex Brass Silencer Replacement for 1/4 NPT BSL-02

  • MATERIAL: The pneumatic Mufflers are made of copper, with high pressure resistant, not easy to rust and trip, providing better noise reduction..
  • SIZE: The size of the brass flow control muffler is thread outer diameter: 1/4 inch/12.5 mm.
  • thread length: 0.28 inch. Please pay attention to whether the size of the product matches your device before placing an order..
  • PRINCIPLE: The sintered exhaust muffler designed in many small holes drilled in the pipe wall, when the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
  • APPLICATION: The thread hex brass muffler can be used in air cylinder, solenoid valves, crankcase, gearbox, oil tanks and pneumatic tools, etc..
  • PACKAGE: You will receive 10PCS exhaust muffler filters, and if you have any question about our product , please contact us. We are here to serve and support..
Check Stock

CWM Pot Filler Faucet Stainless Steel Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles

  • Constructed by 1.5mm thick SUS 304 stainless steel tubes.
  • Equipped with solid brass ceramic cartridge.
  • Equipped with CWM Aerator provides a steady pressure and straight consistent 3.5 GPM water flow.
  • 100% factory high pressure and low pressure tested.
  • pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, no harmful materials added.
  • dual swing joints allows the pot filler to easily fold away when not in use.
  • NPT 1/2" conical connection thread (without brass fittings), can prevent water leakage without using water tape.
  • NPSM 1/2" connection thread, need to use water tape.
  • Fit for US Standard, with a installation flange for stability ..
Check Stock

MAXFLO Heavy Duty Brass Hose Shut Off Valve | 2 Pack Garden Hose Connector | Water Hose Valve Shut Off | Shutoff Valve | 2 Extra Pressure Washers | Fits All Standard Hoses

  • ☀ LEAKPROOF GUARANTEE made with high resistance brass our internal high pressure ball valves are solid and reliable preventing water from leaking through the valve and flooding your yard, saving you time and money.
  • ☀ LIFETIME WARRANTY WARRANTY-MONEY BACK GUARANTEE We are extremely confident in the durability and performance of this BEST IN shut off valve 30 Day no questions asked MONEY-BACK.
  • ☀ ERGONOMIC SWIVEL CONNECTOR DESIGN our brass design makes watering a breeze. No more tired hands, and easy manipulation, ergonomically-designed handle easy to turn on and off. Adjustable flow control..
  • ☀ 2 PACK HEAVY DUTY ONE WAY VALVE CONSTRUCTION High Grade Brass, very durable and easy to use. Rust-proof guarantee for lifetime use.
  • ☀ UNIVERSAL FIT connector size thread standard 3/4″ GHT thread, durable and practical.
Check Stock

PLUMB eeze Brass Pressure Relief Valve Set @ 75 PSI for Water Well Pressure Tank, 3/4"

  • PRESSURE RELIEF VALVE – 3/4″ Line Connection, 75 PSI.
  • FOR COLD WATER ONLY – Pressure relief valves are recommended for all cold water system installations..
  • PROTECTION – protect against damage to plumbing system, piping and pressure tanks. “.
  • DIMENSIONS – 3/4″” Male thread for screwing into tank/tank tee. 1/2″” female thread for accepting plumbing running to drain. “.
  • LEAD FREE – Made from lead-free brass..
Check Stock

Bächlein Two Way Brass Garden Hose Splitter - 3/4 Inch 2 Way Y Connector for Water Hose - Shut Off Valve with Handles - German High Quality Brand

  • VERSATILE USE - With the Bächlein Y-connector with 2 separate shut-off ball valves you have numerous possible uses - whether garden hose, washing machine, water tank, water filter or other devices!.
  • HIGH FLEXIBILITY - Using the adjustment levers, the amount of water can be individually regulated for both sides and is therefore completely flexible - the hose splitter can be rotated 360 degrees for assembly!.
  • SIMPLE INSTALLATION - The two way splitter can be installed without tools in just a few steps thanks to the standardized thread and the precisely fitting seals. US 3/4 ” internal thread and US 3/4 ” external thread!.
  • BEST MATERIALS - All Bächlein products are made from selected premium materials. Only the highest quality and laboratory-tested brass as well as tested seals and valves are used for the Bächlein hose splitter!.
  • BÄCHLEIN PLEDGE - Great quality from a German brand! We want to make the decision as easy as possible for you. This is why we offer full refunds in case you are unsatisfied with our products..
Check Stock

Wilkins RK1-600XL Repair Kits

  • Material of Construction: Rubber, Steel, Zinc, Brass.
  • Type: 600 Series Lead Free Pressure Reducing Valves.
Check Stock

Hollis DIN to Yoke Adapter

  • Fit for 200-300 Bar DIN Scuba tank valves..
  • Tightened using 8mm hex key (not included)..
  • Made of chrome plated brass, high tensile strength and corrosion resistance..
  • Height: 0.6inch/1.5cm, Outer Diameter: 0.8inch/21.5mm, Inner Diameter: 0.4inch/1cm..
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

Legend Valve 111-304NL T-50 No Lead Pressure Relief Valve 75-150 PSI, 3/4

  • Pressure Rating: Adjustable from 75 to 150 P.S.I.
  • Pressure relief valves are for protection against excessive pressure.
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

1/4" NPT Thread ISO B Carpet Extractor Brass Quick Connector Coupler

  • 1/4″ NPT Thread to connect the hose on Carpet Extractor.
  • Brass Body Material and Stainless steel poppet valves.
  • High temperature seal ring material can work at 160˚C.
  • interchangeable with most of the carpet extractor brands quick connector.
  • Chemical resistant Viton seals and o-rings.
Check Stock