Top Thread Carbide Inserts

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

20 Pieces Carbide Turning Inserts TCMT110204 TCMT21.51 TCMT Insert Tain Coated CNC Lathe Inserts for Lathe Turning Tool Holder

  • Carbide Turning Inserts are made of high quality carbide material, not easy to rust and durable..
  • Carbide Inserts are hard and sharp, cutting faster and more efficient..
  • Suitable for turning and finishing machining steel, stainless steel, cast iron and non-ferrous metals materials..
  • 20 pieces gold carbide inserts in a plastic box, easy to store..
  • Size: TCMT110204 TCMT21.51, 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

2 T/C OLSEN HEGAR NEEDLE HOLDER 4.5\ + 5.5\ WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE(HTI BRAND)

  • T/C OLSEN HEGAR NEEDLE HOLDER 4.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
  • T/C OLSEN HEGAR NEEDLE HOLDER 5.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
Check Stock

Shars 3/4\ x 7\ RH Internal Indexable Threading Boring Bar with 16IR Carbide Insert 404-2223 P]

  • Model : 16IR AG60 external thread insert..
  • Coating: Smooth surface, wear resistance, oxidation resistance..
  • Durable: Exquisite workmanship, high strength, high toughness, stable and durable..
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

HHIP 3900-5259 AXA-16E Threading Holder (250-116)

  • Unique design allows you to use both sides for threading cuts.
  • Supplied with a fully adjustable carbide chip breaker and carbide Shims.
  • Two Triangular carbide inserts are included.
  • Interchangeable with Aloris and Dorian AXA Series.
  • Replacement inserts are part # 6004-6031.
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

Carbide Grooving Inserts GTN-2 QC1402, Indexable Inserts Multilayer Tin Coated CNC Lathe Tool Inserts Cut-Off Tool, 5 Pieces

  • Carbide grooving inserts are made of high quality carbide material, not easy to rust and durable..
  • Carbide inserts are hard and sharp, cutting faster and more efficient..
  • Suitable for turning and finishing machining steel, stainless steel, cast iron and non-ferrous metals materials..
  • 5 pieces gold grooving inserts in a plastic box, easy to store..
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

116pcs Self Tapping Thread Slotted Inserts and Steel Wire Thread Inserts Combination Set Thread Repair Tools for 2D M3/M4/M5/M6/M8/M10/M12

  • 【INTERNAL THREAD】 Providing strong internal thread, the self tapping thread slotted inserts resist heat and corrosion when installed..
  • 【ELASTICITY】 The wire thread insets Increase connection strength and fatigue resistance due to the elasticity of thread inserts..
  • 【VIBRATION RESISTANT】 Wire thread inserts combination set is strong vibration resistant, which can prevent loosening..
  • 【EASY TO INSTALL】 You can be easy and quick to install the wire thread inserts by only using one assembly tool..
  • 【PACKAGE INCLUDED】 The package includes 58pcs wire thread inserts and 58pcs self tapping thread inserts..
Check Stock