Top Thread Connection

Screw Repair Sleeve Assortment Kit Thread Repair Insert Assortment Kit Steel Screw Repair Sleeve 60pcs 304 Stainless Steel Threaded Insert Insert nut Wood Screw Set

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

100pcs Stainless Steel SS304 Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 2D Length for Helical Repair

  • Helicoil thread repair kit is easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • The steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • M8 helicoil is suitable for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • Helicoil m8x1.25 can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
  • Used in all kinds of low strength materials, thread inserts can largely improve the wear resistance performance of screw connection, and avoid thread damage..
Check Stock

3/4 Inch GHT thread Garden Hose Adapter with Aerator, 360 Degree Swivel Faucet to Garden Hose Adapter,Sink Garden Hose Attachment Connection for Bathroom Kitchen

  • Use upgrade: The garden hose adapter has two kinds of threads, which not only allows to connect the faucet to the 3/4 inch garden hose,The 55/64 "x27 male thread of garden hose to faucet adapter can also be connected to the faucet aerator..
  • ①Self-contained M22 (55/64" x 27) female thread for connection to M22 (55/64" x 27) male thread faucets..
  • ②Extra M24 (15/16" x 27) male thread to M22 (55/64" x 27) male thread adapter for connection the M24 (15/16" x 27) female thread faucet..
  • 360 Degree Swivel Adapter:when connecting the garden hose, the rotating ball can rotate 360 degrees to prevent the hose knotting from affecting the water flow speed..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 3/8\-16 Internal Threads, 1/2\-13 External Threads, 0.500\ Length, Made in US (Pack of 10)

  • USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

GOVALVE Brass Bulkhead Fitting - 3/4” NPT Female x 1” Straight Male Thread Water Tank Connector with 2 Rubber Rings for Water Tower Tank Barrels

  • 3/4" NPT Female thread. 1" Straight Male thread.Thread is smooth without burr..
  • Made of brass. Not easy to corrode. Even if used for a long time, it will not rust..
  • Threaded connection. Provide tighter connection. Easy installation without complex tools. Can be connected with faucet and other pipe fittings..
  • Rubber gaskets. Double sided protection, more stable connection and better sealing effect..
  • Widely used: commonly used in water tanks, towers, water storage barrels, rain buckets..
Check Stock

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

  • Pipe Thread Material: Nickel-Plated Brass.
Check Stock

Kitchen Faucet Head Replacement, Kitchen Sink Faucet Replacement Parts, Kitchen Faucet Sprayer Nozzle, Splash-proof Spayer Head, Pull-out Sprayer Head, 3-Function, Brushed Nickel, PAKING PB3001

  • THREE-FUNCTION SPRAYER HEAD: 1.Stream Flow rate: 1.8 GPM.
  • 3. Sweep Spray.  The splash-proof spray design is the biggest feature of the nozzle, which is so soft and delicate that it produces little splashes to the kitchen sink..
  • NON-RETURN VALVE DESIGN: Built-in non-return valve works to prevent water backflow. It immediately shuts off the water when the kitchen faucet is switched off, with no more dripping..
  • FILTER FILTERING IMPURITIES: The filters works to regulate water flow rates & filter impurities, proving you&your family with clean, freshed and healithy water..
  • SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options. Please confirm the thread size before ordering..
  • DIMENSION: Overall Width: 6.69 '' Thread Height: 0.5 '' Overall Height Exclusive the Thread: 3.93'' Connection attached to the hose: G1/2 male thread size..
Check Stock

40pcs Threaded Inserts Assortment Kit with M6 Internal Hex Tool

  • Steel thread inserts can effectively improve screw connection, greatly improving the reliability..
  • Widely used in the automotive industry, rail vehicle industry, shipbuilding industry, household appliances, construction machinery, etc..
  • Made of high quality carbon steel, wear-resistance, durable in use..
  • Strong resistance to vibration which can prevent loosening, enhance connection strength and improve connection..
  • These self tapping thread inserts can be installed directly without pretapping. It can be directly screwed into the specific hole reserved by the base metal..
Check Stock

LDR Industries 530 2050 Aerator, One Pack, Silver

  • Faucet to hose aerator adaptor allows connection to standard 3/4-inch male hose thread.
  • Converts standard male (15/16-inch x 27 thread) or female (55/64-inch x 27 thread) aerator to 3/4-inch male hose thread or 15/16-inch x 27 male thread.
  • Lead free compliant - meets ca's Ab1953 and vt's 18 vsa low lead laws.
  • For faucets that use a less common thread will require an additional adapter..
Check Stock

Laing E14 1-1/2-Inch Buttress Thread Circulation Spa Pump 230-Volt

  • 1 1/2" MPT Thread Suction Connection Size.
  • 1 1/2" MPT Thread Discharge Connection Size.
Check Stock

LAING 74427, 3/4

  • 1 1/2" MPT Thread Suction Connection Size.
  • 1 1/2" MPT Thread Discharge Connection Size.
Check Stock

Eastman 60249 CPVC Center Drain Washing Machine Outlet Box Assembly Kit, 1/2-Inch CPVC, 3/4-Inch MHT outlet with 1/4-Turn Ball Valves Installed, White

  • CONNECTION: 1/2″ CPVC connection and 3/4-inch Male Hose Thread (MHT) outlet.
  • SPECS: 1/2-inch CPVC inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
  • Inner Dimension: 7-1/2″ x 5-5/8″ x 3-3/2″.
  • QUALITY: This outlet box is built with one-piece construction and a raised drip guard that helps prevent potential leaks.
  • USAGE: It is designed for recessed residential applications.
  • CERTIFICATION: This outlet box is UPC certified for use.
Check Stock