Top Thread Holding

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • Size: 14ga(1.6mm) thickness,2.4'' length(60mm). One package contains 2 insertion pins. ① Style A: a hollow at the end, ( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just holding). ② Style B: No hollow,just stretch piercing hole to 14g(1.6mm) thickness..
  • ① Style A Function: Used for assisting in the placement of shaft. Put piercing bar in the end of the pin, then push it though.Pin will come out of the hole and piercing bar will be in. Great for changing jewelry. Groove at the end helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubr....
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

E-Z LOK Knife Threaded Insert for Hard-Wood Brass Thread Inserts M6-1.0 Internal Threads 0.500 Length Pack of 10

  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
Check Stock

Light Weight Thread Stand - 3 Spools Holder for Domestic (Home-Base) Embroidery and Sewing Machines - Four Colors for Choices - Black

  • √ NOT ONLY HOLDING 3 SPOOLS – Our thread stand can hold up to 3 spools threads and each thread can then be threaded through the corresponding plastic hoop provided vertically above each spool position. This thread stand also has storage space for 12 prewound bobbins, pins and other small accessories – thus also helps you organize better on your working platform..
  • √ FEEDING THREADS SMOONTHER AND EASIER – Our thread stand enables smoother flow of thread off the spool – thus eliminating any possibilities of tangles or thread getting stuck/snagged to avoid breaking or skipping of stitches during embroidery, this surely will make your embroidering and sewing experiences happier and easier..
  • √ WIDER SPOOL HOLDER COMPATIBILITY – Our thread stand allows you to hold small to huge size spools equally well for domestic embroidery, quilting, serger or sewing. It makes your embroidery, sewing, quilting or serger process hassle-free, and allows you to focus more on your creativity rather than basic problems. It also helps you refill bobbins from huge spool bobbin threads.(Note: Our thread stands are not sturdy or heavy enough for the industrial sewing, quilting and serger machines!!!).
  • √ EASY ASSEMBLY AND DISASSEMBLY – Our thread stand has clear i....
Check Stock

New brothread - 15 Options - 8 Snap Spools of 1000m Each Polyester Embroidery Machine Thread with Clear Plastic Storage Box for Embroidery & Quilting - Different Brown

  • ★ Spool with Locking Base Resists Thread Tangling: Our 1000m (1100yd) snapping spool has a locking base, which is specially designed for keeping your thread tails from unwinding. So, the thread tails of each spool will not get mixed up in box and thread spools huggers or thread nets are no longer needed for holding your embroidery machine thread tails..
  • ★ 100% Polyester Material: Color Fast, High Strength and Exceptional Lustre, all these Excellent Characters are based on the material of our embroidery machine thread: 100% Polyester!!! Lower risks of breaking or fraying, Elasticity and Tenacity of polyester also reduces risks of looping and puckering..
  • ★★ New brothread Polyester Embroidery Machine Thread: Each Spool has 40wt and 1000m (1100yd) length, ideal embroidery machine thread for Brother Babylock Janome Singer Pfaff Husqvarna Bernina Embroidery and Sewing Machines.100% Quality Guarantee + 100% Risk-Free Satisfaction Guarantee. New brothread always think what you think, do what you do, love what you love..
Check Stock

E-Z LOK Knife Threaded Insert for Hard-Wood, Stainless Steel Thread Inserts 1/4-20 Internal Threads, 0.625' Length Pack of 10

  • THREADED INSERTS FOR WOOD – E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • BRASS OR STEEL OPTIONS – Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • STRONG THREADS MADE EASY – Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool..
Check Stock

E-Z LOK Threaded Insert for Hard Wood Assortment Kit Brass Thread Inserts 6-32 to 3/8-16

  • THREADED INSERTS FOR HARD WOOD – E-Z LOK Threaded Insert Assortment Kit for hard wood. Brass threaded inserts for putting strong, machine threads in wood..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts in this thread repair kit provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • EASILY INSTALLS – The brass metal threaded inserts are easily installed with a screwdriver, bolt/jam nut, or optional drive tool..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • KIT INCLUDES – 10 pieces each: 6-32 (0.375" long), 8-32 (0.375" long), 10-32 (0.500" long), 1/4-20 (0.500" long), 5/16-18 (0.625" long), 3/8-16 (0.625" long)..
Check Stock

JTS Ultrasonic Cleaner Baskets Mini Set 2 PCS Stainless Cleaning Small Parts Holder

  • BASKETS FOR CLEANING SMALL PARTS SET OF 2 BASKET HOLDERS - 1" & 5/8" Diameters BRASS BODY with STAINLESS MESH - NON Magnetic.
  • Small parts holding basket is made of a Brass Frame Body with stainless steel mesh to hold the small parts, gem stones, the smallest screws and other miniature parts..
  • Cleaning basket is perfect for holding small parts in your Ultrasonic, Alcohol Wash Cups and Cleaning Solutions..
  • The baskets are made of 2-Sections, that thread and screw together securely holding parts. Basket can be opened and closed by simply unscrewing both halves from each other. Now cleaning small items is easy, without losing them..
  • Sale is for a Set of 2 (Small & Large Size).
Check Stock

Set of 20 ~ Keep Your Bobbin Threads Matched Up with Your Thread Spools (Color Mixing-20Pcs)

  • Suitable for most thread spools and bobbins, including Types A, A/15, & L.
  • 20 Assorted Colors: Blue, Purple, and Pink..
Check Stock

US Art Supply Premium Beechwood 60-Spool Sewing & Embroidery Thread Rack

  • Premium Natural Beechwood Contruction for Superior Appearance and Durablilty.
  • 60-Spool Thread Rack for Holding Sewing, Quilting, Embroidery Spools and most Mini Cones.
  • The Natural Hardwood May Be Painted or Stained to Match with any Room Decor.
  • The Spindles Accommodate a Wide Variety of Spool or Cone Sizes to Store All Your Thread.
  • Convenient Flip-Out Legs to be Freestanding on a Table or Can Be Hung on a Wall.
Check Stock

The LEGO Animation Book: Make Your Own LEGO Movies!

  • ✔[Easy Extension Bar] - Simple extension stick helps in exploring more possibilities and postions shooting on beautiful photography. PLEASE NOTE: Only pole is included, no gimbal, no camera:).
  • ✔[Universal Compatibility] - Standard 1/4" Screw for wide mounting. Various gimbal stabilizer including DJI RONIN S / RONIN SC / OSMO Mobile 2 / OSMO Mobile 3 / OM 4/ ZHIYUN Crane V2 is suitable. Helps getting wider and higher view in photography and video shooting. Or you can mount on other devices with 1/4 inch thread..
  • ✔[Lightweight But Strong] - ONLY 0.38lbs in weight but it's powerful to support your gimbal stabilizer cameras. Product length: 13.8 inch.
  • Diameter: 1.4 inch； PLEASE NOTE: The pole itself is not stretchable..
  • ✔[Well Made] - Quality Carbon Fiber Body, offers comfortable holding..
  • ✔[Bottom 1/4" Thread Hole] - With 1/4" thread on the bottom, the extension pole can be mounted on tripod/slider..
Check Stock

Prime-Line 9038225 Drywall Screws, Bugle Head, Phillips Drive, #8 X 3 inch, Black Phosphate Coated Steel, (25-pack)

  • Used to attach drywall to wood or metal studs.
  • Very coarse thread for holding/securing into different materials.
Check Stock