Top Thread Insert

E-Z LOK Coil Threaded Insert For Metal 18-8 Stainless Steel Helical Wire Thread Insert 8-32 Internal Threads, 0.328\ Length, Pack Of 10

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 8-32 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

uxcell 1/4-20 304 Stainless Steel Helical Recoil Coil Wire Thread Insert 25pcs

  • 304 Stainless Steel Material, Wire Thread Repair Inserts..
  • threaded insert 304 stainless steel are used to replace old striped out or cross thread holes..
  • Drill a specified hole, the hole and insert the coil for a complete installation..
  • Widely used in steam turbines, electronic communications, computers, lamps, mechanical equipment, radiators, and 3D prints equipment..
Check Stock

E-Z LOK Coil Threaded Insert for Metal 18-8 Stainless Steel Helical Wire Thread Insert 1/2-13 Internal Threads, 0.750\ Length, Pack of 5

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 1/2-13 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

1/4 -20 Nylon Insert Hex Lock Nuts Allen Hex Drive 304 Stainless Steel 18-8 Full Thread Coarse Thread UNC Pack of 25

  • Package: 25 PCS 1/4"-20 Nylon Insert Hex Stainless Locknuts.
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length

  • WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
  • ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
  • EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel

  • Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
  • 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
  • Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
  • Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check Stock

XunLiu Key Locking Inserts Thread Repair Int.M12X1.25 Ext.M16X1.5Lg16

  • Repair internal thread and strengthen external thread..
  • When applied to low strength materials, the strength of threaded hole can be greatly enhanced..
  • Repair the wrong hole, avoid the wrong parts reworking..
  • The Key Insert thread sheath can be removed without damaging the parent material.
Check Stock

iplusmile Knurled Nut, M3 Threaded Inserts M3 Thread Copper Knurled Nuts Heat Set Insert for Printing 3D Printer and More Projects (100pcs, 3x4.6x5.7mm)

  • M3 THREAD INSERT SIZE - 3mm x 4.6mm x 5.7mm (inside diameter x outside diameter x height). We use professional processing equipment and uniform mold production to ensure that the size error is controlled within the range of 0.01mm..
  • COPPER MATERIAL - These knurled threaded insert embedment nuts are made of durable copper. Female thread knurled nuts are suitable for mounting into tapered holes by heating or for molding during injection molding..
  • COMPLETE THREAD - M3 threaded insert nuts are all made according to standards, with clear and deep threads, small tolerances, standard round shapes, so threaded insert are easy to install..
  • GOOD WORKMANSHIP - Surface of the M3 brass insert nut is clean and free of burrs and will not harm other parts such as 3D printer, plastic or wood..
  • WIDELY APPLICATION - M3 heat set inserts are widely applied in laptop plastic housings, 3D printers, automotive,electrical injection molding, and all kinds of plastic casings. ✭✭✭（If you have any questions about our products, please feel free to contact us. We will try our best to solve all your problems until you are satisfied.）✭✭✭.
Check Stock

MEIYYJ 500Pcs M2 M2.5 M3 Metric Female Thread Knurled Brass Threaded Insert Embedded Nuts Assortment Kit,Double Pass Knurl Nuts Copper Embedded Fastener for Furniture Electrical and More Projects

  • Type of Product: Brass Threaded Insert Embedded Nuts Assortment Kit..
  • Product Material: Made of premium brass, which has high hardness, no deformation, durable and reliable for long time use..
  • Package Detail: In this set, it include 10 kinds of m2, m2.5, m3 knurl thread inserts nuts total 500pcs which are well packed in a plastic box..
  • Easy To Use：These Brass Threaded Insert Embedded Nuts can be installed by heat into thread tapered hole or molded in during injection, the insert has a guide so there is no need for a counter bore or countersink. easy to install..
  • Product Feature:These Knurl Thread Insert Nut can be widely used on the injection moulding for tightly fixing..
Check Stock

Self Tapping Inserts Self Tapping Threaded Inserts 50pcs Brass Slotted Thread Inserts Self Tapping Thread Slotted Inserts Pressed Fit into Holes

  • 【Self Tapping Capability】: This self tapping thread insert has self tapping capability, so you don’t need to tap in advance, you can directly screw it into the reserved hole.
  • 【Strong Tensile Strength】: This threaded insert embedment nuts has strong tensile strength and large contact area with the finished product.
  • 【Can Prevent Loosening】: This brass slotted thread inserts are easy to install, it have strong shock resistance, which can effectively prevent loosening.
  • 【Improve the Thread Strength of the New Product】: This self tapping thread slotted inserts can effectively improve the thread strength of the new product.
  • 【7 Types, A Total of 50】: This brass threaded inserts has 7 commonly used types, a total of 50, which can be used for a long time.
Check Stock