Top Thread Stand

Evaty 5 Pack Aluminum Alloy Metal Stand Base Holder (Silver)

  • 1pcs Thick Acrylic stand display for 510 screw thread RDA tank, 9pcs silicon anti-slip ring , the 9pcs silicone suits for different size of tank ..
  • there are 9pcs 510 screw thread for RDA tanks , 9pcs silicone anti-slip rings (3pcs in 25mm diameter , 3pcs in 22mm diameter , 3pcs in 18mm diameter ).
  • the 9 holes are with 510 thread screw , it suits any 510 thread screw tank.
  • screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order .NOT in a mess ..
Check Stock

HUIZHU Acrylic Desk Holder with 510 Thread Screw for 510 RDA Tank

  • 1pcs Thick Acrylic stand display for 510 screw thread RDA tank, 9pcs silicon anti-slip ring , the 9pcs silicone suits for different size of tank ..
  • there are 9pcs 510 screw thread for RDA tanks , 9pcs silicone anti-slip rings (3pcs in 25mm diameter , 3pcs in 22mm diameter , 3pcs in 18mm diameter ).
  • the 9 holes are with 510 thread screw , it suits any 510 thread screw tank.
  • screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order .NOT in a mess ..
Check Stock

Embroidex Adjustable Single Thread Spool Holder – Stand Alone Embroidery, Sewing or Quilting Thread Holder or Stand – Ensures Smoother Feed = Heavy Plastic Base

  • ★ UNIVERSAL SPOOL HOLDER – Besides a wide range of spool sizes, this unique spool holder helps you hold even the large conical spools of threads which are otherwise difficult to accommodate in a built-in thread holder and require a lots of hacks like mason jars, etc. – larger spools cost less and offer you more thread compared to standard size spools. This stand, thus, not only makes life more convenient for you but also makes the sewing, embroidery or quilting more cost-effective..
  • ★ BUTTERY FEED – The standalone thread stand or thread spool holder is ideal for machines with horizontal spool holders. It makes thread come out at even pace and smoothly off the spool, thus eliminating any chances of frequent thread breaking or tangling. This is one of the best solutions for cross-wound cones which unfold or unwind over the top of the cone..
  • ★ SMART DESIGN – There is a central pin for holding the spool which is capable enough to hold very big sizes of spools too. The thread from the spool is threaded through the hook at the end of the tall vertical guide and then it can be normally threaded through the machine as usual. The tall guide bar ensures that the thread feeds from a point which is higher than your machine to make the feed u....
Check Stock

HUIZHU Wo-od Stand Base Holder for 510 Thread Tank 510 thread screw for 510 Thread carts 510 thread cartridge 154MM * 154MM *13MM

  • Woo-d 510 screw thread RDA tank stand display , thick material and durable . 154mm x 154mm x 13mm.
  • there are 19pcs 510 screw thread for RDA tank , round stand base ..
  • the 19 holes are with 510 thread screw , it suits any tank ..
  • screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order . NOT in a mess ..
Check Stock

DIY Tool Kit Jig Winding Set,Ceramics Tweezers,Cutter,Folding Scissors Brush Screwdrivers with A Carrying Case

  • 1pcs Thick Acrylic stand display for 510 screw thread RDA tank, 9pcs silicon anti-slip ring , the 9pcs silicone suits for different size of tank ..
  • there are 9pcs 510 screw thread for RDA tanks , 9pcs silicone anti-slip rings (3pcs in 25mm diameter , 3pcs in 22mm diameter , 3pcs in 18mm diameter ).
  • the 9 holes are with 510 thread screw , it suits any 510 thread screw tank.
  • screw the 510 RDA tank on the stand . it will not fall off , keep your tanks all standing in order .NOT in a mess ..
Check Stock

Rotary 14907 PK3 Mower Blades

  • ✅ RT1 = .375 inch Dia., RT2 = .75 inch Dia., RT2L = .75inch Dia., RT4 = 40mm, RT5 = 50mm..
  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT2 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT2..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ The gland files are specifically designed for hydraulic cylinder glands and resurfacing seal areas.
  • restores snap ring grooves, keyways, grooves, glands, and square threads inside and outside.
  • ✅ SATISFACTION GUARANTEED: We at Rotary Thread stand behind our products and invest in product quality. Our US-based friendly customer service team is here for you and happy to help answer any questions you may have.
Check Stock

Telefunken 5 Piece Dynamic Drum Microphone Kit

  • ...Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise..
  • SIMPLE INSALLMENT AND CONNECTION :A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. Each instrument microphone is designed with the standard thread 3/8" or 5/8" to match all types of microphone stand. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick..
  • ADAPTABLE AND WIDE RANGE OF APPLICATIONS:Typical microphone applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds. All mics comes with standard XLR connectors to allow compatibility with most audio instruments..
Check Stock

Riverruns Fly Tying Thread Spool Stand Nature Wood Spool Station Hand Made Travelling

  • Riverruns easy shipping thread spool stand 24 spools capacity. Main body is made of premium natural beech wood in smooth finish. It is very sturdy for....
  • It has 3 layers with wood dowels on each layer. The dowels are 1.57 inch(4cm) tall enough, conveniently organizing 24 spools in a small neat space.....
  • The legs of thread spool stand are foldable. So it can be used to stand on the table or hung it on the wall after folding the legs..
  • Great advantage is compact size easy shipping, 10.2*3.8*2.75inch( 25.5*9.5*7cm).
Check Stock

2 Pack Screw Thread Adapter, 5/8\ Male to 3/8\ Female Mic Screw for Blue Yeti/Blue Snowball/Blue Yeti X Microphone Stand Mount by Frgyee (Black)

  • High Quality - This mic stand adapter is well constructed made out of solid metal. Rugged metal construction ensures long life and reliable daily use. Great replacement for the cheap plastic adapter. Holds your mic on nice and sturdy..
  • Specialty - This 5/8" Male to 3/8" Female thread adapter is designed for most mic stand on the market, such as Blue Yeti mic, Blue Yeti X mic, Neewer boom arm, Blue Snowball Ice Mic, Blue Radius III shock mount..
  • Save Your Money - Don't need to cost a lot more to return the mic stand and re-order another stand any more. Conversion of microphone holders and accessories from 5/8 "threads to 3/8". If you have some sort of mic stand or boom arm that has a small screw but your microphone has a big screw, this is the adapter for you..
  • Knurled Surface - Knurled surface provides excellent grip for easy installation and removal. Anti-slip, complete and deep thread without burrs, convenient to install, stable and tight..
  • Specification - 2 Pack screw adapters. The diameter of a 5/8 threaded hole is about 15mm. You can check it before purchase. It's good to have a strong connection for your mic. You will feel more secure and safe knowing that you don't have to worry about the thread breaking off and your expensive mic falling off....
Check Stock

25 inch Flexible Jaw Arm Clamp Mount Holder Stand Compatible with Logitech Webcam C920s C925e C922 C930 C615 Brio StreamCam

  • Webcam Stand Length: Approx.64cm / 25 inches.
  • Webcam Stand's jaw of the clamp fit the Desk,Table,Sideboard Max thickness 5.6cm (2.2 inches).
  • Compatible with Logitech Webcams C920s C922 C930 C615 Brio StreamCam and any comes with 1/4''-20 female thread webcams.
  • This Webcam Stand Max load weight 0.5 kg (1.1 lb).
  • Package included: 1 * 25 inches Flexible Arm Stand.
Check Stock

The Hillman Group 662 Wing Nut, 1/2-13-Inch, 8-Pack , Zinc

  • Overall Size: 26.3 x 11.6 x 12.7mm / 1.04" x 0.46" x 0.5" (L*D*H).
  • Application: Fixing plates, blinds, drums, cymbals, music stand, folding chairs, quick clamps, home furnishing, fixing racks, etc..
  • Advantage: It is used in places where frequent adjustment or disassembly of fastener connections is required. No tools are required to install the product, just turn your hand to complete..
  • Notice: When locking, you must confirm the thread specifications and clean the thread surface to avoid thread slipping..
  • Feature: Easy to install and disassemble, reusable..
Check Stock

Embroidex - 20 Spool Thread Stand for All Home Embroidery Machines Brother Babylock Janome Bernina Pfaff etc..

  • ★ The Embroidex 20 Thread Stand makes it easy to stay organized at your machine. Simply load your favorite 20 thread colors, in any put-up, and you’ll be ready for take-off. We are confident you’ll become so organized and efficient that you’ll need extra thread! This amazing thread organizer neatly accommodates King Cones, mini-king, snap spools, wound and cross-wound sewing spools..
  • ★ Place behind your machine, makes thread color changes quick and easy..
  • ★ Compatible with all home embroidery machines..
Check Stock