Top Thread forming Screws

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

• ...h to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase....

DIY.TK Wood Screws Sets Flate Head Phillips Driver，6#8#10#，150pcs

• Use for most woodworking jobs and materials of woods,need pre-drilled hole for hard wood to avoid split. Wood screws can be used in conjunction with wall plugs to hang objects such as curtain rails.
• Phillips design minimize bit slippage, provides good holding power in different woods and man-made materials..
• Our wood screws are thread forming screws with larger threads！ Also have sharp points for ease of installation..
• Wood screws neatly packaged in a plastic clear box,Conveniently Portable, this box can handy reusable. Most used 6 sizes(inch) :#6x1/2.

M10 x 1mm Thread Repair Kit 10pcs Stainless Insert Helicoil + Drill + Tap Set ABBOTT

• 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
• 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
• 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
• 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
• 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..

Natruss Thread Repair Kit 20 Pcs M8x1 Stainless Steel Rethreading Tap Set for Female Thread Repairing Insert Sleeve

• 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
• 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
• 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
• 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
• 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..

Shorpioen 255-Pack 6-18 x 1 1/2 Phillips Bugle Head Fine Thread Drywall Screw Black Phosphate BC-0624YPG

• Fine thread Drywall--Sharp point: For attaching drywall to metal studs from 25 gage through 20 gage thick.  Longer sizes are ideal for multiple layers or insulation. Fine thread Drywall--Drill point: Will drive easily through drywall, drill a hole in a steel stud up to 14 gage thick, and form its own mating thread.  Can also be used for attaching plywood or insulation board to 14 gage metal.
• Screws shall be quenched in liquid and then tempered by reheating to 650°F minimum.

20Pcs Thread Inserts Protector,Male Female Reducing Nut Repairing Tools with Steel Wire for Improve Thread Strength,M12 x 1.75(2D)

• 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
• 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
• 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
• 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
• 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..

PSCCO 100 Pcs Phillips Countersunk Head Machine Screws #4-40x3/8'

• Machine screws are very convenient and can be used to replace or add hard drives in computer systems..
• Made of 304 stainless steel, it can be used indoors and outdoors, usually used to fix power supply equipment and expansion cards to the computer case..
• Straight shank fasteners, the external thread is designed to pass through a hole or nut that is pre-punched to form a screw paired thread..
• Two models are available, and the quantity is sufficient..

100 Qty #8 x 3/4\ Black Phillips Modified Truss Head Wood Screws (BCP1078)

• [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable.
• [ZXL NO RUST] 5/16" Cupped HWH is manufactured from a strong ZAMAC zinc-aluminum alloy. Molded Head encapsulates the EPDM washer, which fits neatly and conforms to the inside of the mold.
• [KS LO-ROOT THREAD DESIGN] Fastener thread transitions from fine to coase. The low root design provides excellent pullout strength versus traditional or HI-LO thread forms.
• [MICRO-BIT POINT DESIGN] Drill point design consistently penetrades metal panels, eliminates the need to "punch" the metal panels with a sharp point to start the drilling process. MB point is excellent for penetrating multiple thicknesses of steel often found on ridge cap or trim applications.

50PCS Threaded Inserts,Self-Tapping Thread Insert,M3-M12 Thread Reinforce Repair Tool Self Tapping Thread Inserts Set for Plastic Copper

• SUITABLE: The self-tapping thread insert is a kind of fastener that strengthens the thread, which can form a high-strength inner thread hole when embedded in a soft material such as plastic, copper. It can also be used to repair the damaged inner thread..
• MATERIAL: Made of high quality stainless steel, it is of high hardness and low abrasion,Greatly improve strength and stability of screws connection.
• ADVANTAGE: With certain elasticity and even load, it is resistant to vibration to avoid loosening,Long service life - it can be used repeatedly..
• QUICK TO INSTALL: Easy and quick to install with only one assembly tool..
• INSTALLATION METHOD: The self-tapping screw sleeve installation does not need to be threaded in advance. It can be directly screwed into the specific hole reserved for the base material with the installation tool. The same screw as the original can also be used for the female thread of the broken tooth. It is economical and beautiful. For new products It can also increase the thread strength.

8-32 x 1-1/2 Hanger Bolt (50 Pieces)

• HIGH QUALITY STAINLESS: These Oval Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today..
• SCREWS THAT YOU CAN DEPEND ON: Our Oval Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
• GREAT TO KEEP AROUND: Bolt Dropper stainless hardware is great to have around for use in wood and wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
• DIMENSIONS: Diameter: #8| Length: 7/8 | Threads per Inch: 32 | Thread Type: Coarse (standard) | Quantity: 100 pcs | Material: 18-8 (304) Stainless Steel.
• LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE..

Fasteners Plus ST Fastening #10 x 1 Kwikseal Woodbinder Metal Roofing Screws Metal-to-Wood Galvanized Pack of 250

• [COATED SCREWS] 2.5 mils of computer controlled powder coating that will not chalk or fade due to UV inhibitor in all colored coatings..
• [KS V-NECK HEAD DESIGN] HWH with V-neck design adds strength to prevent head twist off under extreme torque..
• [EPDM RUBBER WASHER] Vulcanized to a G-90 steel backed washer to provide maximum sealing ability, prevents leaks, even when drilled at an angle.
• [KS LO-ROOT THREAD DESIGN] Fastener thread transitions from fine to coase. The low root design provides excellent pullout strength vs traditional or Hi-Lo thread forms.
• [MICRO-BIT POINT DESIGN] Design consistently penetrates metal panels, which eliminates the need to "punch" the metal panels with a sharp point to start the drilling process.

(200) 5/16-18x3 Flat Head Trailer Floorboard Deck Screw T40 Torx Plain