Top Thread forming Tapping Screws

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock

VIGRUE 510Pcs Stainless Steel Wood Screws Assortment Kit 4#6#8#10#12 Phillips Pan Head Sheet Metal Screws Self Tapping Screws Set,Length 3/8 to 1-1/2

  • Material: 304 Stainless Steel (18-8). For interior/exterior use..
  • ✔Package includes: 510pcs and 18 sizes stainless steel wood screws.
  • Various thread size and length in one set can be applied to wood, metal, plastic, aluminum projects. Save time to pick one by one..
  • #12x3/4",1-1/2" Phillips pan head wood screws..
  • ✔These pan head sheet metal screws with extra sharp point, accelerates screw starts during assembly. Deep and clear thread indentations are specifically designed to resist back-out even after prolonged vibration. Ideal for outdoor/ndoor woodworking..
  • ✔304 Stainless steel ensures these pan head self tapping screws effectively prevent corrosion and avoid break off..
Check Stock

VIGRUE 420Pcs Black Wood Screws Set #6#8#10 Round Head&Flat Head&Truss Head Phillips Self Tapping Wood Screws Assortment Kit Length 1/2 to 2

  • Head Style: Phillips Round Head,Truss Head,Flat Head.
  • Material: Carbon Steel (Black Zinc Plated). For interior/exterior use..
  • ✔Package includes: 420pcs and 21 sizes black wood screws.
  • Various thread size and length in one set can be applied to wood, metal, plastic, aluminum projects. Save time to pick one by one..
  • #10x3/4",1",1-1/4",2" Phillips self tapping wood screws..
  • ✔These black screws with extra sharp point, accelerates screw starts during assembly. Deep and clear thread indentations are specifically designed to resist back-out even after prolonged vibration. Ideal for outdoor/ndoor woodworking..
  • ✔Carbon steel with black zinc plating ensures these wood screws effectively prevent corrosion and avoid break off, last longer than other brand in the market..
Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.
Check Stock

Hilitchi 304 Stainless Steel Hex Washer Head and Phillips Truss Head Self Drilling Sheet Metal Tek Screws Assortment Kit (Phillips Truss Head)

  • ♛ Made of 304 Stainless Steel, stainless steel is superior to regular steel and provides excellent rust resistance in water applications, Suitable for indoor and outdoor use.
  • ♛ Set includes 10 most-used sizes: #6, #8, #10, #12.
  • ♛ Package Quantity: 200-Piece, All of screws will be packed in a sturdy plastic box, can be use for a storage box.
  • ♛ Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material..
Check Stock

Power Pro 48610 Wood Screws, #9 x 2-1/2\

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel, resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

480Pcs M3 M4 Self Tapping Wood Screws Assortment Kit Philips Flat Head Small Wood Screws Fasteners Contain 30Pcs Screws Anchors Use as Cabinet Screws Drywall Screws,ect 8 Sizes Carbon Steel

  • 【HIGH QUALITY MATERIAL】:The self-tapping wood screws made of quality Carbon Steel, resistant to rust,good corrosion resistance in bad environment, which have a sharp point that helps penetrate the material..
  • 【QUALITY & WORKMANSHIP】:Adopting high-precise cutting technology, the screws thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【WIDE APPLICATION】:Self tapping small wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
  • 【PACKAGE INCLUDES】:This screws assortment kit including 8 kinds Phillips countersunk flat head self-tapping screws. Contains M3 x 6mm, 8mm, 10mm, 12mm, 16mm, and M4 x 20mm, 25mm, 30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 480Pcs different types of wood screws, and all of screws will be packed in a sturdy assortment case, can be used for a storage box, is organized for you..
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...rface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

M3 X 0.5 HSG D6 THREAD FORMING BOTTOM TAP HSS

  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...rface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...rface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

#8 x 1-1/4 Stainless Deck Screws 100 Pack Square Drive Type 17 Wood Cutting Point 18-8 305 Stainless Steel Hidden Fasteners Corrosion Resistant by Bolt Dropper

  • High Quality Stainless: These Stainless Steel Deck Screws are 100% 305 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today..
  • Extra Hard Head: Our hardware is very strong with heads that do no strip easily. It is great for outdoor and saltwater use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications..
  • Self Tapping: No need to pre-drill as these have Type-17 Self Tapping Points made to cut into the hardest woods. Increase efficiency and productivity with these bad boys..
  • Dimensions:Diameter: #8 | Length: 1-1/4" | Thread Type: Coarse (standard) | Point: Type 17 Wood Cutting | Head: Flat Head w/ Nibs | Drive: Square | Quantity: 100 pcs | Material: (18-8) 305 Stainless Steel..
  • Lifetime Guarantee: We are so confident that our stainless steel deck screws are the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock