Top Threaded Hardware

Prime-Line M 6151 Tub Enclosure Rollers, 3/4 inch, 4-Pack , White

  • Used by a variety of tub and shower door manufacturers.
  • Use of these rollers replace worn and rusted wheels to help restore smooth sliding of shower doors.
  • Threaded hex head hub with 3/4 in. diameter roller.
  • Constructed of (convex/round edge) nylon rollers with steel ball bearings and non-threaded hubs.
Check Stock

VideoSecu 5 White Universal Satellite Studio Speaker Mounts/Brackets for Walls and Ceilings 1Y0

  • Ideal for mounting home theater satellite speakers on walls or ceilings weighing 8 pounds or less.
  • Made of durable, weather resistant, injection molded fiber resin reinforced polymer.
  • Multiple tilt and swivel pivot points allow perfect directional speaker aiming.
  • Designed to fit most home theater satellite speakers with one threaded mounting hole, two threaded mounting holes or keyhole mounting systems.
Check Stock

Incra IMS2 24-Inch Incra Miter Slider

  • Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist.
  • Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Includes threaded mounting holes and hardware for easy attachment to any application.
  • Includes plans for a wide variety of shop-made jigs and fixtures.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Weber 69857 Logo Label for Spirit 200 and 300 Series Grills (2013-2015 Models) and Genesis 200 & 300 Series Grills (2007-2010 Models).

  • Genuine Weber part 69857 Logo Label for many Spirit 200 and 300 series grills (2013 - 2015 Models) and Genesis 200 and 300 series grills (2007-2010 Models)..
  • Threaded post with nut in the center and smaller, non-threaded post 1-3/8" to the right (when viewing back of logo)..
Check Stock

Custom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390

  • Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
  • Comes complete with stainless steel mounting hardware for a quality installation..
Check Stock

Moxon Vise Hardware Kit with 2 each 8 Inch x 3/4-10 Threaded Rods, 2 each 4-1/2 Inch Cast Knobs and 4 each 3/4 inch Nuts and Washers

  • ... performed. It raises the workpiece to a more comfortable and ergonomic height. It is highly portable and can be quickly mounted anywhere on a bench or table, and when not in use, easily stowed away on a shelf or hung on a wall..
  • This Moxon Vise hardware kit is quite economical, yet contains high-quality 3/4-10 threaded rods (NOT Acme threads), nuts, washers and cast knobs. This hardware kit contains everything needed (minus the wood) to make a fully functional Moxon vise..
  • This kit does not come with detailed plans or measured drawings but includes a comprehensive manual with numerous design considerations allowing you to build a custom Moxon vise that suits your personal needs..
  • This kit contains 2 each 8 inch 3/4-10 threaded rods (NOT Acme threads), 2 each 4-1/2 inch cast two-prong knobs and 4 each 3/4 inch nuts and washers. For a more traditional look and feel, all metal parts are made from unfinished steel..
Check Stock

Moxon Vise Hardware Kit with 2 each 8 Inch x 3/4-10 Threaded Rods, 2 each 4-1/2 Inch Cast Handles and 4 each 3/4 inch Nuts and Washers

  • ... performed. It raises the workpiece to a more comfortable and ergonomic height. It is highly portable and can be quickly mounted anywhere on a bench or table, and when not in use, easily stowed away on a shelf or hung on a wall..
  • This Moxon Vise hardware kit is quite economical, yet contains high-quality 3/4-10 threaded rods (NOT Acme threads), nuts, washers and cast knobs. This hardware kit contains everything needed (minus the wood) to make a fully functional Moxon vise..
  • This kit does not come with detailed plans or measured drawings but includes a comprehensive manual with numerous design considerations allowing you to build a custom Moxon vise that suits your personal needs..
  • This kit contains 2 each 8 inch 3/4-10 threaded rods (NOT Acme threads), 2 each 4-1/2 inch cast single-prong handles and 4 each 3/4 inch nuts and washers. For a more traditional look and feel, all metal parts are made from unfinished steel..
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

ROJOSER Heavy Duty Canopy Kit and 3.2 feet Pendant Light Fixture Chain for Chandelier or Swag Light Fixtures,Vintage Black

  • 【Package includes 】1 pcs 5''base plate canopy kit with crossbar, mounting screws, threaded rod, screw collar loop, 6 Feet black heavy duty chandelier chain, 2 connection locks. (NOTE: Not include grounding wire).
  • 【Canopy kit】5 Inch diameter steel canopy with standard 1/8 IP threaded pipe (9/32" inside dimension) with nessessary mounting hardware. The kit includes a full collection of hardware for installation, Also, we provides user manual for your easy to use..
  • 【Heavy duty chain】6 feet chain, 0.15 inch wire diameter, supports to up to 50 lbs. Nice finish and heavy build, durable and rust resistant. The length of this chandelier chain is adjustable, more flexible for your use..
  • 【Wide Application】This chandelier hanging kit is great for turnning a plug light into hardwire, using the center loop and mount to canopy with retaining ring. There are no visible side screws and you can use it as a pendant lamp hook, decoration hanger, lantern hook. Perfect with indoor light for Hallway, Restaurant, Foyer, Bar, Living Room, Cafe and so on..
  • 【Purchase with Confidence】ECUDIS makes and sells easy to use products, if you have any questions about our ceiling canopy kit please contact us..
Check Stock

Supplying Demand SM5411 Refrigerator Universal Mount Condenser Fan Motor CWOSE Replacement Kit Single Speed 1550 RPM 50/60Hz

  • Hardware included. UL Approved. Threaded mounting holes. Sleeve bearings. Permanent lubrication. Overload protected. Totally enclosed. Rotation....
  • Shaft Length: 1/2 inch. Shaft Diameter: 1/4 inch Threaded. RPM: 1550. Hertz: 50/60 Hz. Rotation: CWOSE..
  • It is important to disconnect your appliance from the power supply before servicing..
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific model. We have included a....
  • SD products come in Supplying Demand packaging that includes helpful information should you have any issues..
Check Stock

BELL 5400-5 Extension Box Adapter, 1 Gang, 9.5 Cu-in, 5-1/4 in L X 3-1/2 in W X 1-1/2 in D, 1/2 In. NPT , Gray

  • State of the art powder coat finish provides maximum weather ability and scratch resistance.
  • Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit.
  • Three 1/2 In closure plugs, installation hardware, gasket, and ground screw included.
Check Stock