Top Threaded Pipe Adapter

Rain Bird DRIPPAILQ Drip Irrigation Repair and Expansion Kit

  • 【Arbitrarily expand】This system allows you to increase or decrease the quantity according to your needs, is a good helper for home irrigation garden. this kit includes 2 types of tap connectors, and the two size tube and connectors, at the end are dripper, sprinkler and snap. With a threaded tap connection used for 1 "And 3/4" Threaded taps, another is uesed for unthreaded faucets..
  • 【wide applications】 save water and save time. Automatic irrigation kit is great for roof cooling, irrigation, agriculture, vegetable, greenhouse, flower bed, misting etc. Manual packaging, there is very little error rate, if you have any problems, you can apply for free replacement, or contact us. Thanks!!!.
Check Stock

Aquascape Submersible Pond Water Filter | 95110,Black, small piece of pipe or 3/4-inch threaded fitting

  • Can be added to the intake of almost any submersible water pump resulting in crystal clear water and maintenance-free pumps.
  • Contains ceramic filtration rings, providing substantial surface area for beneficial bacteria to colonize. The threaded intake and included multi-hose adapter ensure the filter is ready to Adapt to most pond pumps with a small piece of pipe or ¾” Threaded fitting..
  • Pre-filters pumps for reduced maintenance.
Check Stock

3/4'' US Standard Faucet Adapter for Misting Cooling System, Connect 1/4'' Misting Hose, Convert 3/4' Female Hose Thread to 1/4' Tubing, 2 Pcs Adapter with Washers + 1 Pcs Mist System End Plug.

  • 【3/4 Inch US Standard Faucet Adapter】These faucet adapters are made of eco-friendly plastic and are sturdy and durable. With Washers, it is tight and watertight..
  • 【Barb Design and Lock Cap】The hose adapter connects the 1/4" tubing through the barb part, and locks the tubing through the lock cap part of the adapter, so there are two protections against falling off and leakage..
  • 【Filter Accessories Prevent Clogging】The product is equipped with filter parts, which can intercept large particles of impurities in the water, effectively protect the nozzle and prevent clogging..
  • 【American Standard 3/4" Thread】Female threaded fittings are American Standard 3/4" threads, suitable for 3/4" standard threads (3/4"GHT, 3/4"NH, 3/4"NPT), a wide range of Suitable for garden connectors such as outdoor faucets, hose diverters, garden filters, garden timers..
  • 【Suitable for Many Kinds of 1/4 Inch Hose/Pipe】Suitable for many kinds of 1/4 inch pipe, suitable for 1/4 inch PE pipe, 1/4 inch (outer diameter: 7mm, inner diameter: 4mm) PVC dropper Irrigation Tube, 1/4" (OD: 6mm, ID: 4mm) PU tube..
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

(60 pcs) M8-1.0, DIN 908, Metric, Pipe Plugs, Hex Socket Drive, Straight Thread, Steel, Plain

  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • Also known as Threaded Pipe Fittings or Threaded Screw Plugs..
  • An internal hex socket drive is also known as an Allen drive..
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls）

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

HALIGA Brass M12 Threaded Extension Rod for Pendant Light, Island Lighting, Chandeliers,Lighting Fixture downrods & Stems,12 Inches

  • ... bringing you a quality and reliable using experience..
  • Please check the thread size before buying to make sure it fits your product. Suitable Size: Suit for M12 thread. The length of the lamp extension rod is 12 in, the outer diameter is 0.531 in, and the inner diameter is 0.330 in(wires can pass through). The link threaded pipe length is 0.984 in and the outside diameter is 0.456 in(Suit for M12 thread.)and the thread pitch is 1mm . Please refer to the product map2 for more detailed size introduction..
  • Easy to install and splice: The package included 4 rods, and 4 threaded pipes for connection.Splicing according to the required length .Installation by threaded pipes screwing ..
  • The accessory can increase the installation height of the pendant light, chandeliers or island lighting fixtures.Note: This is NOT A LIGHT FIXTURE but an accessory for lighting fixtures.
  • With the tilt ceiling adapter, the pendant light can be installed on the Vaulted or Angled Ceilings. (The ceiling adapter needs to be purchased separately, and it is more favorable to purchase with it). Customer Service: If you have any question about item, please contact us by clicking on "sold by 'Haliga' "and then clicking on 'Ask a question' and telling us what's wrong about item, we will so....
Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

  • FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

  • FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Tnuocke 4PCS PVC Bulkhead Fitting 3/4 Inch with Plugs,water Pipe Connector,(21-38mm)Hose Clamps Kit,Water Tank Connector Adapter,Thru-Bulk Pipe Fitting for Rain Barrels,Water Tanks,Pools(Grey)H-07

  • 【Product Material】made of PVC, which will not fade, crack or peel off, and has a long service life..
  • 【Product Size】50 mm x 48 mm, 3/4 inch,Color is gray.
  • 【Easy to install】You need drill one 3/4 inch hole to install, assemble the bulkhead and hose adapter together,threaded from the front end,one and done installation.
  • 【Widely Application】Double-threaded partition with thick silicon sealing cover is suitable for most ponds, rain buckets, water tanks..
  • 【Package include】You will get 4pcs 3/4 inch bulkhead adapter and 4pcs plugs,4pcs Pipe Connector,4pcs (21-38mm)Stainless Steel Hose Clamps.
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock