Top Threaded Pipe Coupling

SZJELEN WEIPU ST1210/ST1213 Threaded Coupling IP67 2Pin~9Pin Waterproof Connector Plug and Socket,Industrial Electrical Female Male Connector (4Pin)

  • Model : WEIPU ST1210/ST1213 Series 4Pin Connector.
  • Material : Zinc alloy with black nickel plating:Termination:Solder.
  • Aviation Connector + Socket, IP67 Waterproof,Threaded Coupling,Solder Termination.Widely used in various machine tools, locomotives, electricity, post and telecommunications, communications, navigation, instrumentation, lighting systems, medical and oil exploration and other fields..
  • If you need a different type of connector, please contact us..
Check Stock

Dixon FAB250N Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2-1/2 NST Female x 2-1/2 Hose ID Barbed

  • Coupling for connecting a hose to a pipe or fitting.
  • Hose barb on one end and female NST threads on the other.
  • Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
  • Nut for tightening threaded fitting with a wrench.
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Frigidaire 18FFDHMH01 Dehumidifier Drain Hose 12 Foot Black

  • Drain hose continuously drains water from dehumidifier for uninterrupted use.
  • 12 foot hose length can be cut to fit your installation needs.
  • Universal 3/4" threaded garden hose style coupling allows easy installation.
  • Place washer inside coupling, screw hose coupling onto dehumidifier or collection pan, and place opposite hose end into drain.
  • Rubberized 12' drain hose is durable for peace of mind.
Check Stock

Westinghouse Lighting 70272 7027200 12" Lamp Pipe Kit, 1 Pack, Yellow

  • 12, all thread lamp pipe Kit, zinc plated steel, includes two: 1/8Iron pipe x 12Threaded pipe, two 1/8Iron pipe couplings.
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
Check Stock

BIGFOOT RV Water Hose 25 ft - Drinking Water Hose for RV Camper, Boats - Food Grade Hose - Lead, Phthalate, BPA Free Hose - Anti Kink, Lightweight Water Hose - Purple, 5/8inch Diameter, 25 ft Long

  • ...f garden water pipes, sprinkler systems, faucets and travelling vehicles water lines such as RV/camper/boat/travel trailer which with water supply system, by blowing out water from water lines/plumbing or pipes. Very easy and convenient anti-freezing method to use and help to reduce the use of antifreeze..
  • Universal threaded connection - Our winterize blowout adapter is standard threaded connection in most cases. Designed with a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread. Easy attach air line to water lines or hose system to make a nice winterization solution..
  • High quality product - The winterize blowout adapter is made of brass, strong ruggedness and good durability, very safe to use and not easy to break or deform, can serve you longer time.
  • Easy to use - Screw the water pipe to the female thread side and connect the quick plug to the quick coupling inside the air compressor line, then turn on the air compressor and turn around the ball stem to open or close and adjust the air flow rate to blow dry water from the water pipe..
  • Widely Application - This quick winterize adapter is suitable for many systems (such as RV, camper, boat, travel trailer and so on that the vehicle with a water supply system) blow out or ....
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe sc....
Check Stock

Oatey 38980 Faucet Balls, 2\

  • 2"" drain opening - rubber coupling, solvent weld or threaded.
  • 2-Inch drain opening - rubber coupling or solvent weld.
  • Dimensions: Box, 9-Inch W x 6 1/8-Inch H x 3 1/16-Inch D.
Check Stock

PVC Pipe Schedule 80 Industrial Grade Grey (.75) Grey/PVC - 1FT, Gray

  • Schedule 80 PVC pipe is used for industrial and higher pressure water flow applications..
  • Schedule 80 PVC pipe can handle 140 degrees F in temperature..
  • The pipe comes in standard 1’ or 5’ sections and is available in plain end so a coupling is needed for installation..
  • Pipe sizes range from ½” through 4”..
  • Ease of installation and many application uses are just two great benefits of this pipe..
Check Stock

1/2-13X1 3/4 Hex Rod Coupling Nut 3/4 inch Across Flats Grade 5 Zinc (Pack of 5)

  • Hex-Shaped on the outsides, a wrench can tighten or loosen it easily.
  • Material: Coupling nut are made of 304 Stainless Steel, good rust resistance and durable..
  • Application: Metric coupling nuts are designed to secure 2 parts together, most commonly threaded rod.
  • Risk Free Shopping: toppros offer a 100% Money Back Guarantee for every customer. If you are not fully satisfied, please contact us and ask for a refund or replacement.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock