Top Threading Die Guide

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

  • 【Round Die】- Thread size: M6 x 1.0mm.
  • Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
  • 【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
  • 【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
  • 【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • 【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..
Check Stock

RIDGID 44913 600-I Pipe Threading Machine, Hand Held Power Drive Pipe Threading Machine with Carrying Case and Dual V-Jaw Support Arm for Stable Operation

  • Lightweight design makes these hand-held pipe threading tools one of the easiest to handle threaders in the RIDGID line.
  • Durable, die-cast housing and fiberglass-reinforced plastic body make this hand-held threader ideal for harsh working conditions.
  • Built for use with RIDGID 11-R Drop Head Die Heads to easily cut pipes ranging from 1/8 inch to 1-1/4 inches (3 mm to 30 mm) in diameter.
  • Convenient dual V-jaw support safety arm delivers the sturdy, reliable support needed to withstand both the machine’s weight and threading forces.
  • Rugged metal carrying case protects the pipe threading machine while keeping multiple die heads neatly organized for quick and easy transport.
Check Stock

10 Piece UNC Pipe Die Set 1/4\

  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing.
  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear.
  • Made of heat treated carbon steel, high strength and hardness.
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost.
Check Stock

Electric Pipe Threader Tool Kit 2300W 110V, Portable Handheld Electric Pipe Threader Threading Machine With 6 Dies 1/2-Inch to 2-Inch Pipe Threading Die Heads, Ratchet Pipe Threader Kit

  • Lightweight design makes these hand-held pipe threading tools one of the easiest to handle threaders in the RIDGID line.
  • Durable, die-cast housing and fiberglass-reinforced plastic body make this hand-held threader ideal for harsh working conditions.
  • Built for use with RIDGID 11-R Drop Head Die Heads to easily cut pipes ranging from 1/8 inch to 1-1/4 inches (3 mm to 30 mm) in diameter.
  • Convenient dual V-jaw support safety arm delivers the sturdy, reliable support needed to withstand both the machine’s weight and threading forces.
  • Rugged metal carrying case protects the pipe threading machine while keeping multiple die heads neatly organized for quick and easy transport.
Check Stock

Century Drill & Tool 92920 Rethreading Die, 1-14NF

  • 【Advantage】- Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear..
  • 【Application】- Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost..
  • 【Function】- There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads..
  • 【Warm Prompt】- Different sizes can be chosen on this listing. Please check what you need before purchasing..
Check Stock

Lighthouse quality tools - M14X1 LH HSS Adjustable Round Threading Die

  • Fits RIDGID NPT universal machine die heads 504A, 711, 713, 811A, 815A, 816, 817 and 842.
  • High-Speed threading die for stainless steel.
  • Threading dies have capacity of 1/2-inch to 3/4-inch.
  • Right-Hand, NPT (National {American} Pipe Tapered) thread.
  • RIDGID 47765 NPT dies have 14 TPI (Threads Per Inch).
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

1/2\ NPT Pipe Carbon Hex Rethreading Die

  • ✅ One Set is Enough: Our Die set include 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14, 1/2''-13, 9/16''-12, 5/8''-11, 3/4''-10, 7/8''-9 and 1''-8 UNC. A variety of dies are sufficient for almost all maintenance and repair work..
  • ✅ Superior Durability: We cooperated with the material research institute to change the ratio of carbon in the material, greatly improve the comprehensive mechanical properties of the material, and greatly increase the service life of our dies..
  • ✅ Precision Thread: The latest production technology maximizes the processing accuracy of the thread, and the outer surface of the threading die is smoother..
  • ✅ Portable Metal Case: An exquisite tool case will bring you great convenience, and the tools will be returned in time after use, reducing the risk of gadget loss..
  • ✅ 1 Year Warranty: No matter what problems are encountered when using our re-threading hex die set, we will solve it for you within 6 hours, and one-year warranty!.
Check Stock

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

  • Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
  • 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
  • The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
  • POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
  • AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
  • SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check Stock

uxcell 5/8-11 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 5/8-24 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller (....
Check Stock