Top Three Phase Prepaid Meter

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Siemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage

  • 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
  • PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
  • REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
  • VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
  • IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check Stock

Y&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel

  • ...VC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments（Support single-phase or three-phase connection）.
  • We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed).
  • Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.（Voltage, current, active power, electrical energy, frequency, power factor）No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters.
  • Grid Tie Solar Inverter suitable for 4X250W-300W 36V solar panel (Vmp30-39V.
  • Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W.
Check Stock

Digital Phase Indicator , Akozon SP8030 Digital Phase Rotation Indicator LED Buzzer Phase Sequence Meter 200 ith Bag

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock

Jurassic World: The Boardgame

  • Jurassic World is a cooperative board game from 2 to 6 players. It's a combination of making the right choices with your teammates and some luck with rolling the dice..
  • Players start their turn together by placing their banners strategically in the preparation phase..
  • In the action phase players take actions based on where they placed their banner in the previous phase..
  • If something goes wrong and the 'danger meter' reaches 20, all players will lose the game..
  • English Version | 2 to 4 Players | Ages 12+ | 45 to 90 Minute Playing Time.
Check Stock

Phase Sequence Meter, 60V ~ 600V AC 3 Phase Sequence Rotation Tester, with 5 LED Lights, for General Measuring Tool

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock

Omron K8DS-PH1 Phase Monitoring Relay

  • The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
  • Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
  • Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
  • Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
  • Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

iFCOW Electric Power Meter, Three-Phase Multifunctional Digital Energy Meter Voltage Current Display Programmable Electric Power Meter

  • ABS flame retardant shell, good insulation and durable in use. Also features stable performance and high accuracy..
  • Switch input/output, can detect current, voltage, electric energy, power, and power factor..
  • Three-phase voltage, current digital smart meter, with RS485 communication interface, various parameter detection, comprehensive monitoring..
  • Digital display and four buttons design, enables the instrument to achieve convenient and flexible use..
  • It is suitable for complete monitoring and management of electrical parameters in various incoming circuits and large- capacity distribution and outgoing circuits..
Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

3 Phase Voltage Monitoring Sequence Relay JVR800-2 Voltage Protection Relay Under Over Voltage Protector

  • The Composition of This Product: Three-phase voltage protector, chronograph and counter are integrated in one relay..
  • Function: This voltage protection relay has overvoltage, undervoltage, phase loss, phase sequence and unbalanced three-phase voltage protection..
  • Practicality: This 3-phase voltage relay does not require an external power supply. Has practical functions: power delay, output test, etc.
  • 2 rest modules are optional, manual and automatic..
  • The LCD can display data for easy reading..
Check Stock