Top Throttle Position Sensor Thread Repair

MOSNAI EZGO Golf Cart Inductive Throttle Sensor for EZGO TXT 1994 Up/DCS/PDS Electric OEM 25854G01 25854-G01

  • Fit Models: EZGO inductive throttle sensor fits all EZGO TXT, DCS, Medalist and PDS electric golf cart models 1994 & UP..
  • Replaces OEM part number: OEM 25854-G01 25854G01, Golf cart inductive throttle sensor connects to direction selector through wiring harness..
  • Good Quility: One brand new high quality inductive throttle sensor, replaces your worn or broken factory speed sensor.
  • It can be used with 5-pin electric speed controllers and on vehicles with the DCS (Drive Control System) and PDS (Precision Drive System) controllers.
  • Easy Installtion: Flip your tow/run switch off before installation for this EZGO inductive throttle sensor, disconnect batteries is recommended..
Check Stock

TPS APPS Throttle Position Sensor Replacement for 1998.5-2007 Dodge Ram Cummins 2500 3500 Diesel 5.9L | Installation Instructions Included

  • ACCELERATOR POSITION SENSOR: TPS throttle position sensor helps you diagnose idling, sudden speed fall-offs, and check engine light problems.
  • PERFECT FIT: Compatible with 5.9-liter engines in Dodge Ram 2500 and 3500 (1998.5 to 2002) and Dodge Cummins 2500 and 3500 (1998.5 to 2007).
  • WITHSTAND HEAT & VIBRATION: Includes flexible circuit board, OE-style brackets, and hardware for superior performance in heat and vibration.
  • EASY TO OPERATE & INSTALL: Passes rigorous end-of-line testing for reliable, trouble-free operation and easy installation.
  • DIRECT REPLACEMENT: Direct replacement for 53031576, 53031576AD, 3970085, AP63427, 53031575, 53031575AH, 3970084, AP63428, and 56028184A.
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

ELM327 V1.5 OBD2 Bluetooth Scanner Auto Diagnostic for iOS & Android, Car Check Engine Light Code Reader

  • ...re is compatible with Android, iPhone operating systems as well as DOS and Windows computers..
  • Read fault code and know fault code meaning, clear car fault code, display sensor data (including: engine speed, coolant temperature, vehicle speed, intake manifold pressure, air temperature intake pressure, air flow rate, throttle position, oxygen sensor voltage, fuel pressure, etc.) and there are also other more advanced features..
  • IPHONE INSTRUCTIONS: Apple’s iOS compatibility only supports Bluetooth 4.0 (LE) adapters, such as our product. Older Bluetooth adapters are not supported. In the app you use, make sure to select in settings, “Connection type”: Bluetooth 4.0 (LE). In case you don’t do this setting, the scanner may not connect with your Iphone device..
  • Regularly NOT compatible for electric, hybrid and some diesel vehicles. FUNCTIONS- It does not use batteries since it is powered when connected to your car.- Use it when the “Check Engine” symbol or any warning light appears on the dashboard of your car and detects the anomaly in seconds.
  • In the app it shows Fault Codes – Explains possible solutions – Once resolved, you can clear the error codes and the “check engine” light (this covers engine, power platform, emission errors).
Check Stock

Electronic Throttle Body - Compatible with Chrysler 200, Sebring, Dodge Avenger, Caliber, Journey, Compass, & more - 2.0L and 2.4L - Replaces 04891735AC, 4891735AD, 977025 4891735AC - 2007-2017

  • ...T FITS -2011-2017 Chrysler 200 2.4L, 2007-2010 Chrysler Sebring 2.4L, 2008-2014 Dodge Avenger 2.4L, 2007-2009 Dodge Caliber 1.8L, 2007-2012 Dodge Caliber 2.0L, 2007-2011 Dodge Caliber 2.4L, 2009-2017 Dodge Journey 2.4L, 2016 Compass 2.0L, 2016 Patriot 2.0L, 2007-2017 Patriot 2.4L, 2007-2017 Compass 2.4L, Electronic throttle bottle assembly fits many mopar models.
  • QUALITY FIRST - We put quality above all else, You can install throttle body with confidence knowing your part was engineered and constructed to last. This unit is the part that is controlled by your ECU and is responsible for your air / fuel mixture. The included throttle body and gasket are premium quality replacements parts designed for years of worry free performance.
  • REPLACES OEM PART# 04891735AC, 4891735AC, 4891735AA, 4891735AD, 977-025 - Direct Fit - Replacement, Not a Dodge, Chrysler, or Dorman brand part..
  • OEM FIT, QUALITY, and FINISH - Precision engineered to meet, or exceed OEM manufacturing specs, Anti-corrosion and heat resistant materials are used in the construction of this electronic throttle body with IAC TPS (Throttle position sensor). Included is a high quality throttle body gasket to make life even easier when installing..
  • LIFETIME WARRANTY - PEACE OF MIND - At Agent Motor Pa....
Check Stock

NOS 25974NOS Mini 2-Stage Progressive Controller

  • Mini 2-Stage Progressive Nitrous Controller.
  • Hand Held Color LCD 2. 4” Touch Screen Display w/ Micro SD Memory Card to Store Tunes and Software Updates.
  • 2 Fully Independent Stage Outputs – Allows Programming in Any Curve Shape or With Built-in Ramp Builder Application.
  • Progressive Solenoid Operation Based on Time, RPM, and/or TPS (Throttle Position Sensor) Input.
Check Stock

Autel Scanner MaxiSys Ultra, 2023 Newest MSULTRA Top Intelligent Diagnostic, [$2000 5in1 VCMI], Topology, ECU Programming & Coding, 40+ Service, Upgraded of MS919/ MS909/ Ultra Lite, FCA Autoauth

  • ... Test, ERG Test, Window/ Door/ Roof Test, Turning the fuel pump on and off, Cycling the a/c clutch on and off and etc..
  • 【25 SERVICES+ 23 ADAPTATIONS】Autel MS908CV professional HD scanner can perform 25+services like Oil Reset, Injector Coding, D-P-F, ABS bleeding, SAS, Throttle, Cylinder, Trans Adaptation etc, and 23 adaptation functions such as Boost Calibration, Rack Sensor Calibration, Timing Calibration, Monitor Throttle Position Sensor, Fuel Pressure Adaptation and etc. Services are not universal to all CV, please send VIN to autelauthorized @ outlook .com to check compatibility..
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

MOSNAI MCOR Potentiometer MCOR Accelerator for Club Car Precedent Golf Carts (2004-2011) MCOR Motor Controller Replace 1033279-01 or 102528501

  • Club Car Precedent MCOR Accelerator Replaces: OEM# 1033279-01 or 102528501.
  • Fits Club Car Precedent golf carts 2004-2011.
  • Attention Please: Year 2009 Precedent cars changed to a TPS sensor (Throttle Position Sensor) instead of the MCOR2.If your vehicle been converted to MCOR2 it will have the TPS to MCOR adapter..
  • Good Sealing for Longer Life: Ultrasonic bonding for this MCOR with waterproof ring inside. The waterproof is much better than other MCOR with only glue bonding..
  • Warranty: Good After Services and backed by 1 year Warranty..
Check Stock

NOS MINI 2-STAGE PROGRESSIVE NITROUS CONTROLLER WITH TOUCH SCREEN PROGRAMMER,0-9.9 SECONDS PROGRESSIVE TIME

  • ...i 2-stage progressive nitrous controller from NOS is packed with features that makes that challenge much easier. The LCD also displays RPM, bottle pressure (optional) & stage activation providing robust monitoring of your Nitrous system..
  • 2 completely independent stages of nitrous/fuel control, each with independent throttle position activation switch & progressive ramps. RPM on/off control eliminates need for a window switch & allows turning nitrous on & off at set points & conditions. 2 programmable outputs, allowing control of timing retard or other devices. The hand held 2.4" LCD touch screen display (w/ included stylus), makes programming quick & simple & allows you to mount the main controller housing out of sight..
  • Features: New Mini 2-Stage Progressive Nitrous Controller | New Hand Held Color LCD 2.4" Touch Screen Display with Micro SD Memory Card to Store Tunes & Software Updates | Touch screen Stylus included | 2 Fully Independent Stage Outputs - Allows Programming in Any Curve Shape or With Built-in Ramp Builder Application | Progressive Solenoid Operation Based on Time, RPM &/or TPS (Throttle Position Sensor) Input & Can Shut Nitrous Off at a Programmed RPM Ceiling.
  • Specs: Brand: NOS | Emission Code: 4 | Final Percentage: 0 - 100% | Product ....
Check Stock

EOCICI Tire Pressure Monitoring System for RV Trailer - Solar Charge, 6 Alarm Modes, LED Display, Real Time Pressure and Temperature with 6 External TPMS Sensors (0-116psi)

  • ... use magnetic charging when there is no sunlight, It does not occupy the car cigarette lighter. All DEEWAZ products come with a 30-DAY MONEY BACK GUARANTEE and 12 MONTHS FREE REPAIR and TECHNICAL SUPPORT, We offer a customer service in less than 24h/7, If you have any questions, please let us know..
  • 【Exchange Tire Position Freely】MY55 tire pressure monitoring system's tire position exchange function helps the driver to save more time and effort, and if the driver wants to change the tyre position during use, He can change the sensor position directly in the monitor..
Check Stock

ELM327 V2.1 Alerón Brand. OBD2 Bluetooth Scanner Auto Diagnostic for iOS & Android, Car Check Engine Light Code Reader

  • ...are is compatible with Android, iPhone operating systems as well as DOS and Windows computers..
  • Read fault code and know about the meaning, clear car fault code, display sensor data (including: engine speed, coolant temperature, vehicle speed, intake manifold pressure, air temperature intake pressure, air flow rate, throttle position, oxygen sensor voltage, fuel pressure, etc.) and there are also other more advanced features..
  • IPHONE INSTRUCTIONS: Apple’s iOS compatibility only supports Bluetooth 4.0 (LE) adapters, such as our product. Older Bluetooth adapters are not supported. In the app you use, make sure to select in settings, “Connection type”: Bluetooth 4.0 (LE). In case you don’t do this setting, the scanner may not connect with your Iphone device..
  • NOT compatible for electric, hybrid and some diesel vehicles. FUNCTIONS- It does not use batteries since it is powered when connected to your car.- Use it when the “MIL – Malfunction Indicator Lamp” turns up or “Check Engine” symbols or any warning light appears on the dashboard of your car, ELM327 detects the anomaly in seconds.
  • Know about the Fault Codes – Explains possible solutions – Once resolved, you can clear the error codes and the “check engine” light (this cover....
Check Stock