Top Thrust Rod Assembly

SINJEUN 2 Pack 10\ Revolving Frame Caulking Gun, Drip Free Smooth Rod Hand Caulking Gun, 1/10-Gallon Cartridge Capacity, 23:1 Thrust Ratio

  • STURDY STRUCTURE - The shell of the caulking gun is made of aluminum alloy combined with a steel rod and a plastic handle. They form a sturdy structure that is difficult to fall apart. The industrial-grade material makes it last for a long time..
  • HIGH THRUST RATIO - This revolving frame caulking gun is much easier to pull. Its thrust ratio is 23:1 that means less pressure is necessary on the trigger to discharge the contents. As soon as you pull the trigger, the rod jumps backward about a 1/4 inch..
  • DRIP-FREE - The caulk gun is suitable for cartridges with a size of up to 1/10 of a gallon. So it can works well with all common sealant and adhesive cartridges. It is drip-free. When the trigger is pulled, the inner push rod of the barrel pushes the sealant. When the trigger is released, the pusher recedes sharply and the sealant immediately stops flowing..
  • 360-DEGREE ROTATION - The hand caulking gun has a built-in rotating steel frame, and the cartridge can be rotated as needed, which is convenient for operation in and around a narrow working area. The gun also has ladder hooks that can be easily hung when not in use..
  • BUY WITH CONFIDENCE - We stand by the quality of our products and provide super friendly customer service. For whatever reason you're not ha....
Check Stock

Motormite 21151 Drum Brake Bar

  • 13pcs Kits Rotates Piston Back Into Caliper Replacement forting Of New Brake Shoes And Pads.
  • This Tool Kit Allows You to Rewind the Pistons In Brake Calipers By Hand, Without Damaging the Gaskets in the Pistons and Seals.
  • Precisely Made Adaptor Plates with Thrust Bolt Assembly and Reaction Plate.
  • Includes Left And Right Handed Thrust Bolt And 12 pcs Adapters Replacement for Using In Most Domestic And Imported 2/4WD Vehicle.
  • Come With Blow Molded Carrying Case Replacement for Convenient Storage And Carrying.
Check Stock

Amazon Basics Heavy Duty Sealant Caulking Gun -310ml/10oz - 10 1 Thrust Ratio

  • Heavy-duty sealant caulking gun securely holds 10-ounce (310ml) cartridges.
  • easy dispensing with a thrust ratio of 10:1.
  • Smooth pressure rod offers a quieter, less effortful alternative to a ratchet-style pressure rod.
  • corrosion-resistant aluminum handle and trigger.
  • cartridge can rotate as needed thanks to the gun’s revolving....
  • backed by an Amazon Basics 1-year limited warranty.
Check Stock

Bates- Caulking Gun, Silicone Gun, 10:1 Thrust Ratio, Hand Caulking Guns, Caulk Gun, Caulk Gun for Silicone, No Drip Caulk Gun, Gun Caulk, Sealant Gun, Caulk Gun

  • This Caulking Gun Is Ideal For Acrylic, Adhesives, Asphalt, Butyl, And Cement.
  • Smooth Pressure Rod For Less Force Required.
  • Provides Smooth Action And Precise Application.
  • Professional-Grade High-Thrust Ratio Caulk Gun.
Check Stock

Newborn U-Lite Non-Drip Super Smooth Rod Frameless Caulking Gun, 1/10 Gallon Cartridge, 10:1 Thrust Ratio

  • Frameless caulking gun for 1/10-gal. cartridges.
  • Thrust ratio of 10:1 for use with low to medium viscosity materials.
  • Frameless design is compact and lightweight and allows cartridge to rotate for maintaining bead orientation when caulking around corners.
  • Smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod.
  • Rod retracts after each pull of the trigger to help prevent dripping.
Check Stock

5 in 1 Plastic Caulking Tools（Plastic head）,Caulk Remover& Scraper Tool Kit, Silicone Sealant Scraper for Kitchen Bathroom Window Sink Joint, Reusable with 5 Plastic Pads

  • Steel half-barrel (also called cradle) frame caulking gun for 1/10-gal. cartridges.
  • Thrust ratio of 10:1 for use with low viscosity materials.
  • Smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod.
  • Rod retracts after each pull of the trigger to help prevent dripping.
  • Handle and trigger are padded for comfort.
  • Professional-grade 1/10-gallon drip-free caulk gun.
Check Stock

Crower ML93006B5-8 Steel Billet Connecting Rod Set - Small Block Chevy 6.000\ - Set of 8

  • OEM replacement connecting rod,ideal for the motorbike.
  • High quality forged steel material,efficient and durable.
  • Package including connecting rod,crank pin,crank pin bearing,thrust washers.
  • Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.
Check Stock

H-Beam Connecting Rods for Toyota Supra MK4 2JZ-GE 2JZ-GTE 2JZ

  • Double honed bearing surfaces provide absolute reliability at high RPM.
  • Increased wrist pin lubrication with double drilled small end.
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication.
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes.
Check Stock

DPS6 Clutch Tool Double Dual Clutch Dry DPS6 Transmission Reinstall Reset Tool for Ford Volvo Focus Fiesta #307675

  • 【Fit on】 Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013 Equivalent to OEM 205-1017..
  • 【Instruction】Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.Spare Top Plate Part No 1681, Spare Force Screw Assembly Part No 1682. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing..
  • 【Satisfaction Guarantee】 We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. We also support a 12-month warranty..
Check Stock

Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set

  • Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
  • This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
  • This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
  • Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check Stock

Dripless Consumer Grade Smooth Round Rod Caulk Gun C150 | Metal Caulking Gun for 10oz Cartridges

  • The rod retracts after each trigger pull to prevent dripping. The caulk gun has a 5:1 Thrust Ratio..
  • Smooth pressure rod provides consistent bead control and works with most caulks and sealants..
  • The cradle allows the user to securely hold the gun that provides a consistent dispensing flow..
  • The ladder hook, seal puncture tool and spout cutter let you reload 10oz cartridges without a blade..
  • A trusted brand since 1992, Dripless manufactures innovative, premium caulking and dispensing guns..
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock