Top Thrustmaster Clamp Bolt

6Pcs M3 Duplex Bolt Cable Clamp Duplex Wire Rope Clamp Double Clamp Wire Rope Clamps 304 Stainless Steel Cable Clamps Accessories for Industry Construction Home

  • Material : Made from 304 stainless steel for corrosion resistance and durability, thick material, large bearing capacity..
  • The M3 duplex bolt cable clamp is suitable for 3 mm wire rope..
  • Easy to use : The duplex wire rope clamp is made of bolt bases and nuts, washers , which has stronger locking ability and more stability. Duplex clamp is characterized by simple and practical design and easy to use. When you use it, twist the nut with a wrench on the double chuck, then wind the cable on each side of the bolt, and then use a suitable wrench to tighten the nut..
  • Wide application : Heavy duty wire rope clips is a necessity of our life. Duplex clamp can be used to fix clothesline, sun sail, awning, banner, cable, and can also be widely used in industry, construction, transportation, ship and anchor. For safety, make sure to use the correct number of cable clamps. It is recommended to use 3 duplex clamp at each end to prevent the cable ends from slipping out..
  • Package : You will get 6x M3 double clamp wire rope clamps..
Check Stock

Roadformer 2' T-Bolt Hose Clamp - Working Range 56mm - 64mm for 2' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (56mm - 64mm, 2 pack)

  • Roadformer 2" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 2" T Clamp Working Range: Diameter 2.2" - 2.52" same as 56mm - 64mm for 2 inch Hose I. D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Roadformer 3\ T-Bolt Hose Clamp - Working Range 83mm - 91mm for 3\ Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (83mm - 91mm, 2 pack)

  • Roadformer 3" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 3" T Hose Clamp Working Range: Diameter 3.27" - 3.58" same as 83mm - 91mm for 3 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Roadformer 5' T-Bolt Hose Clamp - Working Range 133mm - 141mm for 5' Hose ID, Stainless Steel Bolt, Stainless Steel Band Floating Bridge and Nylon Insert Locknut (133mm- 141mm, 2 pack)

  • Roadformer 5" T Bolt hose clamps: 1/4"-28 300-Series SS Bolt, 3/4" Band in 300-Series SS Floating Bridge and Nylon insert locknut.
  • 5" T Hose Clamp Working Range Diameter: 5.24" - 5.55" same as 133mm - 141mm for 5 inch Hose I.D. - not O.D..
  • It’s better to check your Hose OD to fit the working range before purchasing. Roadformer T-Bolt band clamps are designed to provide connections without leaks..
  • High quality T-bolt clamp performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment.
  • 2 Pieces in Package - Roadformer private label products set industry Standard with Premium Quality.
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

Thrustmaster TM Sim HUB (PS5, PS4, XBOX Series X/S & XOne, Windows)

  • The TM sim hub allows to connect up to 4 Thrustmaster add-ons simultaneously on compatible Thrustmaster wheel bases.
  • Connect the TM Sim Hub directly to For TSS handbrake (plus), TH8A Gearbox and future Thrustmaster add-ons (sold separately)Thrustmaster wheel bases..
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Quick Release Bolt, Bicycle Seatpost Clamp Bolt Quick Release Lever for Mountain Bike Road Bike ( Color : Silver )

  • PREMIUM MATERIAL: Quick Release Bolt is made of Aluminum alloy, this seatpost clamp lever is durable and sturdy..
  • UNIVERSAL FIT: Standard size suitable for all bicycles with hollow axles.
  • QUICK RELEASE: This Quick Release Bolt allows you to quickly and easily adjust the seat height without tools..
  • GREAT REPLACEMENT: This Seat Clamp Quick Release Lever is a simple replacement for your seat binder bolt..
  • GUARANTEE: If you have any problem with this product, you can just take advantage of our 180 days warranty. We will change or refund for any reason..
Check Stock

Jersvimc 2Pcs 3 Inch T-Bolt Hose Clamps for Range 83-91mm, Stainless Steel T Clamp Adjustable Turbo Clamps Intercooler Hose Clamp for 3\ ID

  • 1️⃣[ What You Get ]: 2 x t-bolt hose clamp. It is suitable for pipe inner diameter of 3 inch / 76.2mm. The working range of the clamp is 3.27-3.58 inch (83-91mm). In order to ensure a pleasant shopping experience, please take a good measurement before buying to ensure the right size..
  • 2️⃣[ High-quality Material ]: The T Bolt Clamp is made of high-quality 304 stainless steel, which has more advantages than 201 stainless steel on the market. It has anti-rust, anti-corrosion, strong and wear-resistant properties, will not break even if used for a long time, and has a long life..
  • 3️⃣[ Advance Design ]: The t-clamp adopts a design with edges, and the smooth surface can protect the hose material from damage. The design of the self-locking nut prevents loosening during clamping, and has strong torsion resistance and can be disassembled and installed at any time..
  • 4️⃣[ Multi-purpose ]: The stainless steel t-bolt hose clamp is very practical, beautiful in surface, and extremely cost-effective, so it is widely used in a variety of scenarios. For example, Turbo, air intake system, piping items, intercooler, radiator hose, turbocharger and so on..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience t....
Check Stock

10X 2 Inch 57mm - 65mm Stainless Steel T-Bolt Clamps Turbo Intake Intercooler Clamp (10Pcs 2 inch)

  • ▶Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • ▶These high quality T-bolt clamps offer high tensile strength, durability and corrosion resistance..
  • ▶Universal application,Perfect for DIY Turbo, Intercooler, Intake, Turbo Charger Projects.
  • ▶Clamp Range: 57 mm-65 mm or 2.24"-2.56".
  • ▶This T-Bolt Clamp fits for 2" or 51 mm inner diameter silicone hose fit for 2.4" or 61 mm outer diameter silicone hose..
Check Stock

DEERU Bike Seat Clamp Bicycle Clamp Quick Release Seatpost Quick Release, 2 pcs M6x55 Quick Releases In Package, Black

  • Smooth cam action lever. Extruded CNC machined alloy nut..
  • Quality quick release anodised alloy seat clamp skewer..
  • Axle diameter: about 6 mm. Skewer Length: 55 mm. Skewer Weight: 38 grams..
  • Compatible with most 31.8mm.34.9mm Bike Seat Clamp.
  • This Seat Clamp Quick Release Lever is a simple replacement for your seat binder bolt, need to be M8 bolt. It allows you to adjust the seat height quickly and easily without tools..
Check Stock