Top Thumb Screw

Anbee Mini 3 Pro Drone Carry Bracket for Action Camera / LED Flight Light, with Tripod Mount Adapter and 1/4 Screw Adapter Compatible with DJI Mini 3 Pro RC Quadcopter

• DJI Mini 3 Pro Drone Multifunctional expansion carry bracket, Used for Vlogging Accessories such as Action Camera or flight lights..
• Come with 1/4 tripod mount adapter and 1/4" thumb screw, compatible for GoPro 10/9/8 Series, DJI Action 2, Insta360 GO 2/1 action cameras..
• Easy installation and removal, the inner wall is covered with silicone cushion to prevent scratching the drone body..
• High-quality lightweight material, does not affect the control and flight time of the drone..
• Package List: Carry mount frame x1, 1/4" Screw adapter x1, 1/4" thumb screw..

Vivitar Phoenix Long Flight Time Drone for Adults, HD Action Camera Quadcopter with Brushless Motor and Wide Range, Foldable WiFi GPS with 3 Speeds, Follow Me, 32 Minutes Flight

• DJI Mini 3 Pro Drone Multifunctional expansion carry bracket, Used for Vlogging Accessories such as Action Camera or flight lights..
• Come with 1/4 tripod mount adapter and 1/4" thumb screw, compatible for GoPro 10/9/8 Series, DJI Action 2, Insta360 GO 2/1 action cameras..
• Easy installation and removal, the inner wall is covered with silicone cushion to prevent scratching the drone body..
• High-quality lightweight material, does not affect the control and flight time of the drone..
• Package List: Carry mount frame x1, 1/4" Screw adapter x1, 1/4" thumb screw..

YATENG 10-pcs Anodized Aluminum Computer Case Thumbscrews 6-32 Thread for Computer Cover/Power Supply/PCI Slots/Hard Drives DIY Personality Modification & beautification Sky Blue

Carbon Steel Threaded Knurled Thumbscrew Screw on Knobs Grips Black Round Clamping Screw Black 20 Pieces,M4 x 10 mm

• Ample quantity: you will receive 20 pieces M4 x 10 mm threaded knurled thumbscrews, which can be installed in any place you need, and meet your daily use and replacement.
• Quality material: the male thread knurled clamping knobs are made of quality carbon steel, with good hardness, strength, corrosion resistance and wear resistance.
• It is a fastening accessory that can be applied for a long time and could be reusable for most different purposes.
• Nice craftsmanship: the surface of the grip thumb screw on type round head is smooth, the thread is neat and uniform, without burrs, making the installation effect more tight.
• Easy to install: the grip knob thumb screw adopts a screw-in design, which is easy to install.
• The surface is smooth and clean, making you feel more comfortable to hold and store.
• Warm notice: it is recommended that you need washers as gaskets when installing some monitors to prevent affect to the computer monitor.
• The length of the screw part is 10 mm, which may bottom out on some computer monitors.
• You just need a layer of buffer to prevent direct contact in some cases.

Trijicon ACOG 4 X 32 Scope Dual Illuminated Horseshoe Dot .223 Ballistic Reticle, Green

• BATTERY-FREE ILLUMINATION: Features a tritium/fiber optic illuminated reticle that automatically adjusts the brightness based on available light.
• RUGGED ALUMINUM-ALLOY HOUSING: Forged 7075-T6 aircraft-aluminum-alloy housing provides for a nearly indestructible sighting system.
• COMBAT PROVEN: No other magnifed optic has been used more in combat than the ACOG.
• BULLET DROP COMPENSATING & RANGING RETICLES: The green Horseshoe reticle ranges out to 800 meters for 5.56 (.223 cal).
• Thumb Screw Flattop Adapter (for mounting to pica tinny rail), Thumb Screw (for mounting to carry handle), killFLASH Anti-Reflection Device, Scopecoat, Lenspen, Lanyard Assembly for Adjuster Caps, Trijicon Logo Sticker.

POWERTEC 70225 Right Hand Keyed Bridge Hose Clamps | 4” Easy Turn Thumb Screw Metal Clamp | Stainless Steel | 5-Pack

• INCLUDES: Right Hand 3-3/4”~4-3/8” Bridge Hose Clamps with Keyed Thumb Screw – 5 pcs.
• APPLICATION: Used for securing dust collection hoses, duct work, dryer vents, piping, pvc tubing and more.
• SPIRAL DIRECTION: Features a right hand spiral design integrated with an easy turn thumb screw metal clamp allowing you to make quick adjustments without the use of tools.
• QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel.
• CLAMPING CAPACITY: 3-3/4~4-3/8 inch (111mm).

Veranda Sliding Glass Door Handle Set with Mortise Lock, White, Keyed, 3-15/16” Screw Holes, 1-1/2” Door Thickness

• Easy replacement for most sliding door handles.
• Standard 3-15/16” center-to-center screw holes.
• Easy to grip interior handle with classic exterior handle for right or left handed doors.
• Select your door thickness to receive correct hardware – no cutting down screw lengths!.
• Thumb latch can be mounted in centered or offset position to accommodate 3 or 4 hole doors.
• Includes inside and outside pull, thumb latch, mortise lock with strike, and key cylinder.

Red Hound Auto 6 Quick Removal Screws Hardware for 2007-2018 Compatible with Jeep Wrangler JK Hard Top Quick Release Fastener Kit for HardTop

• Set of 6 premium thumb screws NO TOOLS required for installation (with matching rubber backed washers).
• Compatible with Jeep Hard Top Quick Removal No Tool Knob Kit (includes rubber-backed washers to protect paint).
• Reference number: 6506826AA (note: does not fit 2018 JL Series, only fits JK Series).
• Overall thumb screw length (with head) 1-3/4", Washer outer diameter 3/4".
• Before, it required tools and time, now with this kit it is TOOL FREE and MUCH FASTER.
• Remove/attach your hard top quickly with these attractive thumb screws (no tools required), fasteners store safely in body holes when top is unattached (no loose parts to lose).
• Compatible with Jeep 2007-2017 Wrangler JK (hard top).
• Easy, perfect fit with trouble-free installation.
• Galvanized heavy duty steel screw stud with automotive grade nylon head, galvanized steel washers with rubber backing (for paint protection and to prevent the washers falling off bolts).

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

• This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
• REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
• UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
• ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
• SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..

3/8 x 1 1/2 Thumb Screws with Wing Knob Thumbscrews Thumb Screw Butterfly Thumb Screws Thumbscrew 6

• Package Content: 6 x Thumb Screws with Wing Knob.
• 3/8"-16 Standard Thread Knurled Thumbscrew Grip Knobs Thumb Screw Tee Wing - 3/8" x 1 1/2" Thumb Screws with Wing Knob.
• Thread Material – Stainless Steel - anti-rust and anti-corrosion, strong and durable.
• The head is made of nylon and is 1 3/4" in length.
• Easy to install and remove, can be used repeatedly.

Forbidden Body Jewelry Set of 5/8 Inch Surgical Steel Ear Gauges Screw Fit Tunnels, 16mm Tunnel Plug Earrings

• INSTRUCTIONS: These tunnels have one fixed end and a screw-on piece that holds the tunnel in place after insertion. To insert, always moisturizie the lobes first. Organic Jojoba oil is an ideal moisturizer for stretched ear lobes. Hold the jewelry against the lobe between the thumb and pointer finger, with the thumb behind the lobe as an anchor. Gently insert the jewelry straight into the moisturized lobe until is it securely in place, giving a few rotations/twists. Secure the screw-on piece.

Milenco MIL-4381 Falcon Towing Mirrors - Pair

• Uses only a single thumb screw on each clamp for quick and easy fitting.