Top Tig Arc Welding

Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-160A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

YESWELDER 49Pcs TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit For WP-17/18/26

  • [SPECIFICATION] 49pieces TIG Torch Accessories (consumables)..
  • [APPLICATION] Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • [EXCELLENCE] With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • [NOTE] The insulating rings may not match the CK Torch..
Check Stock

AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)

  • 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose..
  • Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it..
  • Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 4.5mm..
  • Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 0.5MM-3MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E7018, E6013..
  • Powerful And Safe Machine:This 200A Welding machine can weld mild up to 4.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe..
Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

  • ✅【Plasma Cutter】10-50Amp DC current output. The cutting machine offers a variety of welding and cutting abilities.
  • Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
  • The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
  • ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
  • ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
  • ideal for a welding enthusiast or hobbyist with....
Check Stock

RX WELD 55PCS TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit For WP-17/18/26

  • 55pieces TIG Torch Accessories (consumables).
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ❆ Advantage: We have updated our CT418 machine. Under the condition that the basic functions remain unchanged, our machine has increased the PULSE function to make the welding effect even better. And the machine adopts a brand-new digital panel, which is easier to set up and operate. It is still an automatic dual voltage dual frequency (110/220V, 50/60HZ)..
  • ❆ 10-40Amp Plasma Cutter: 40amp plasma cutter current output @220V. Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ❆ PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch co....
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ...ting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the works....
Check Stock

RX WELD 57PCS TIG Welding Torch Stubby Gas Lens #12 Pyrex Glass Cup Kit For WP-17/18/26 (Large)

  • 57pieces TIG Torch Accessories (consumables) with #12 Pyrex Cups.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

HITBOX HF 2 in 1 TIG ARC Welder 200Amp 110V/220V Dual Voltage TIG/ARC Welding Machine Inverter IGBT Stick MMA Welder Model HBT2000

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock

VEVOR TIG Welder AC/DC, 3 in 1 TIG/MMA/ARC Welding Machine with 110/220V Dual Voltage, 200A Aluminum MMA Welder w/Inverter IGBT and Digital Panel, Multiprocess ARC Welder

  • 3 In 1 Multiprocess Welder: For TIG (argon arc welding), welding current range: 1-200A.
  • welding thickness range: 0.5-6mm. For MMA, welding current range: 20-200A.
  • welding thickness range: 1-12mm. For ARC, welding current range: 20-200A.
  • IGBT Inverter Technology: This Tig welder uses an advanced compact IGBT inverter. The IGBT is designed with automatic overheat, and over-current welding defend. The lightness and strength of its components make it a reliable work tool for professionals or personal use..
  • Precisely Digital Display: The digital display makes precise control and stable arc length during welding. The clear digital display will simultaneously show the current and the welding modes. Besides, the welding torch is easy to use and change..
  • Efficient Cooling System: This welding machine has a great welding current when working, and the inner fan enables the device to work steadily by its effective cooling. Besides, there are thermovent on the left, right, and front of the welder..
  • Extensive Application: Our TIG welder machine become light and easy to move combined with a convenient handle. And the welder is great for DIY, maintenance, repair, and metal fabrication like aluminum, stainless steel, carbon steel, mild s....
Check Stock

HZXVOGEN 110V 220V 250A Aluminum MIG Welder IGBT Lift Tig Gas Gasless Stick Arc MMA Welding Machine No Gas Self- shielded Home Use Factory Machine MIG250DP

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-200A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock