Top Tig Electrodes

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 3/32\ x 7\ | 10-pk

  • 10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%.
  • Tungsten remains. Non-radioactive Tungsten electrodes.
  • excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability..
  • Package available: 10-pcs/box for each size of 0.040.
Check Stock

HZXVOGEN 110V 220V 250A Aluminum MIG Welder IGBT Lift Tig Gas Gasless Stick Arc MMA Welding Machine No Gas Self- shielded Home Use Factory Machine MIG250DP

  • 【Dual Voltage TIG / ARC Welder】 110V/220V 2 in 1 HITBOX welding machine, used as TIG welder or ARC MMA stick welder.The inverter frequency is up....
  • 【IGBT Inverter】This Tig welder also uses an advanced compact IGBT inverter, designed with automatic overheat and over current welding....
  • 【2T & 4T Functions】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is....
  • 【Powerful Welding Application】TIG welding thickness 0.3-5.0mm, application of Tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for....
  • 【Buy With Confidence】HITBOX offers good after-sales service. If the machine can not work or have other problem when working, please contact us at....
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ...be carried in the workshop or on the job site..
  • Package Content: 1×plasma cutter welder machine, 1×tig17V torch, 1×ag60 pilot arc cutting torch, 1×stick holder, 1×earth clamp, 1×conversion wire adapter, 1×2 meters gas hose, 1×2 meters air hose, 1×air regulator, 2×electrodes, 2×tips, 2×hose clamp, 1×npt1/4 air plug, 1×brass standard air plug..
Check Stock

LONGEVITY Tigweld 200sx - 200 Amp AC DC Tig/Stick Welder with Digital Display 110v 200v

  • The unit features high frequency start tig and includes a foot pedal for great tig welding control and operation.
  • The stick welder operates on 110v and 220v volts and is capable of welding 7018, 6013, and other stick welding electrodes.
  • With the flip of a swtich, you are able to weld aluminum in AC mode. Features pre-flow, post flow, and clearance effect (balance) function for greater welding control.
  • Great machine for the hobbyist or professional with an easy to use panel. Excellent heat control.
  • Extemely portable weighing 37 lbs and easily carried to any job on site or offsite. The 110v adapter makes it easy to connect to a standard usa outlet..
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated Red EWTh20 3/32 x 7 | 10-pcs

  • Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination..
  • Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • 10-pcs/box Tungsten electrodes (2.0% Thoriated EW-Th2) with quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod Pure Green EW-P 3/32 x 7 | 10-pcs

  • 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
  • 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Amico Professional Welding Machine 200 Amp Stick Arc DC Welder 80% Duty Cycle 100~250V Wide Voltage

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures....
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

TIG Welding Tungsten Electrodes, 2% Lanthanated Tungsten Electrodes, 1/16\ x 7\

  • TIG welding Tungsten electrodes 2.0% Lanthanated (Blue WL20).
  • Good welding effect of stainless steel / iron / carbon steel.
  • Using DC welding, lower amperage required.
  • A pack of 10-pcs, vacuum packaging, not easy to oxidize.
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock

Amico ARC-160 Professional 160-Amp Stick Arc Lift-TIG Welding Machine 80% Duty Cycle 100-250V Wide Voltage Welder

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures....
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock