Top Tig Welder 110v And Cutting

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

WEGOODLDER Tig Welder Welding Machine - 110/220V Dual Voltage Tig/Stick/Arc Welder 250 Amp Tig Welding Machine with Electrode Holder Work Clamp Torch

  • ★Dual voltage 2 in 1 welder:Our WEGOODLDER 2 in 1 welding machine, used as tig welder or stick welder. output current adjustable with knob: tig....
  • ★Light weight with new design:this tig/mma welder come with carry belt, full new case, compact design, easy for storage.light weight can be carry....
  • ★Advanced IGBT inverter technology:excellent stability, hot start, anti-sticking, forces adjust, steeples amperage control, all generators friendly..
  • ★ More powerful and efficient:this tig/stick welder is up to 250 amps, Ideal performance for most 6010, 6011, 6013 and 7018 rods.Pure copper core....
  • ★ Safety and stablity: this tig/arc welder can automatic compensation for voltage fluctuation, over current protection, over load....
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ...the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch consumables..
Check Stock

PrimeWeld 3-in-1 50 Amp Plasma Cutter 200 Amp TIG Welder and 200 Amp Stick Welder - Welding and Cutting Combo Mobile Welding Machine Portable Plasma Cutter Multipurpose Welder and Cutter CT-520D

  • MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2" thick with the 50A plasma cutting function. The TIG and stick welding settings also work....
  • VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld....
  • UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The....
  • PORTABLE, RELIABLE UNIT: The multipurpose welder and plasma cutter weighs only 32lbs, making it a great portable option. It features a duty cycle of....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock

HONE ARC Welder, Actual 185Amp 110V/220V Stick Welder with Lift Tig Function, Digital IGBT Inverter Welding Machine with Hot Start Arc Force Anti-Stick VRD, High Duty Cycle for 1/16\-5/32\ Welding Rod

  • ➠【Really Powerful】This Welder really come up to acutal welding current 185Amp on 220V and 130Amp on 110V, has enough power, ideal for 1/16 inch -5/32 inch welding rods, provide deeper penetration for thick workpiece. The real welding current on 110V and 220V are shown separately, you can't go wrong..
  • ➠【Automatic Hot Start and Arc Force】Amazing hot-start make you arc striking immediately while you touch the rod on the workpiece, ideal for the rods E6013 E7018 E6011 etc...and cellulose electrode E6010. Powerful Arc-force provide smoother welding and deep welding pool, steady arc, spatter less, the pretty nice beads, specially welding thin workpiece..
  • ➠【Lift TIG Function】This Welder Machine come with dual voltage 110V/220V has good Lift-arc TIG function, just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG welder for free..
  • ➠【Safe and Stable】This Soldadora has Anti-stick function easy the electrode removal from the workpiece, VRD function makes you safer, and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation. Capable of welding mild steel, ....
Check Stock

VEVOR TIG Welder 3 in 1, 110V High Frequency TIG/Stick/Clean Welding Machine w/IGBT Inverter, 155Amp Digital Arc Welder

  • High-performing 3-in-1 TIG Welder: Our welder machine has HF TIG, ARC, and a clean mode. It also comes with a TIG torch. The arc success rate of the TIG is 100%. The TIG and hand MMA welding provide an easy arc start, stable current, minimum spatter, and good shaping. Get clean and beautiful welding easily by using clean mode after welding..
  • Safety First & Overheat Protection: The unique air channel design increases the heat dissipation of the power device and control circuits. It also extends the welding time drastically. The IGBT inverter will greatly improve the performance and reliability of the 3 in 1 welder. The outstanding 60% duty cycle can also ensure long-time welding. What are you waiting for? Get ready to feel the difference!.
  • Easy-to-use Panels and Functions: The setup is marked clearly by a name and graphic representation of each knob’s function. The 2T/4T switch is available to add convenience. A gas shield set makes your welds pristine. It is simple to operate for both beginners and skilled welders..
  • Suitable Welding Thickness: Delivers a 155A current output, making the welder machine suitable for welding stainless steel, iron, mild steel, copper, and nickel. (The maximum welding thickness is 0.1″/3 mm.). Whether you are a hobbyist, ....
Check Stock

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

HITBOX 50A Plasma Cutter Welder Combo - 4 in 1 110V/220V 200A HF Pulse TIG Welder - Stick ARC MMA Welder High Frequency Multifunction Cutting Welding Machine with Foot Pedal (CT520)

  • ... 【Foot pedal remote control】Synergic Control,Automatic change of the voltage by adjusting the amperage.Comes with foot remote control / proximity control with MMA, TIG welder can improve welding efficiency, reduce the hassle in pedal control current, and guarantee quality (suitable for cutting and welder). The current fast heating (hot boot), slowly down, is good for the formation of the welding pattern.
  • 【Versatile welding, cutting machine】Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures.
  • 【IGBT inverter & 2T 4T Function】: Hitbox CT520 inverter welder uses secondary inverter technology and pure square wave output, does not penetrate thin plate. Concentrated heat, strong reverse cleaning capacity, wide cleaning range, continuous arc. 2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T.
  • 【BUY WITH CONFIDENCE】Backed by a 2-year warranty, we're committed to a....
Check Stock

Reboot TIG Welder AC/DC Aluminum Welding Machine with Pulse Foot Pedal 200A Full Digital Control 110/220V High Frequency TIG ARC 2 in 1

  • ...gh-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode, the arc is ignited after pressing and releasing the button once. When the button is pressed and released again, the ignition is stopped. Some functions such as current reduction are only possible in the 4T..
  • TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
  • Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and Precise Welding of Thinner-gauge Materials.
  • Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for 110V）.
  • 1 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as we value our customer's investment and trust more than anything else..
Check Stock

HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use

  • Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
  • Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
  • 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
  • 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....
Check Stock

hynade Tig welder TIG200GPACDC 200 Amp AC/DC Tig Welder/Arc/Spot Welder with Pulse AC/DC, Digital Inverter Dual Voltage 110/220V Aluminum Tig Welding Machine

  • Digital TIG200 Pulse ACDC Tig welder,this welding machine is 200Amps TIG/Stick with AC DC function works great with aluminum, Pulse function works great with steel stainless steel and thin metals. Stick function easy weld electrode 7018, 6013..
  • Tig welding machine dual voltage 110/220V, the aluminum tig welder will easy weld 1/4’’ Aluminum and 3/8’’ Mild steel. Machine come with nice 4 meters TIG17 torch..
  • The tig stick welder advance IGBT Inverter technology with PWM Digital control (Pulse Width Modulation ), Frequency is 50/60Hz, High frequency arc starting. (HF Arc starting), Need to touch metal start the arc..
  • 2T/4T TIG torch control, the multi process welders with digital function Pre Gas Time, Start current, up slope and down slope time. Finish current and post gas time can be adjust, Software control machine Square wave AC/DC TIG, Easy to get TIG starting..
  • This ARC TIG welding machine can auto save the setting of welding parameter before power off, Great to works with foot pedal (The pedal is not included in standard accessories), We suggest 63A power breaker..
Check Stock

EXCELLWAY Stick Welder, 200A TIG Welder,110V\\/220V IGBT Inverter Portable Stick Welder,Digital Display Built-in Hot Start ARC Force Welding Machine,Overheating Overload Protection ARC Welder

  • 【MMA/Stick/LIFT TIG 2 in 1】:Perfect Christmas gifts for dad and husband,EXCELLWAY 2 in 1 welder,2 welding modes in 1, high frequency starting TIG: non-contact arc ignition, reducing tungsten and material consumption. The rated input frequency is 50/60Hz, the duty cycle is 60%, the welding speed is fast, the welding seam is flawless, and the welding process is the best. Suitable for stainless steel, alloy steel, mild steel, copper, cast iron, chromium, and other metals. (Need to buy an extra tig lift torch, not included).
  • 【IGBT Inverter】: EXCELLWAY TIG stick welder IGBT Inverter Welder IGBT conduit makes the inverter frequency higher, saves metal materials, greatly reduces power loss, and adjusts the output current at a subtle level, making the welding process control more ideal and the effect more satisfactory..
  • 【Overheating&Overload Protection】Our Lift TIG stick Welder durable, safe, and reliable. Suitable for novices and great for professional or DIY use.Hot Start ARC Force: Support Rods:2.6mm- 3.2mm Rods..
  • 【60% High Duty Cycle】: Long-term continuous work. EXCELLWAY Welding Machine can work continuously for a long time, with high work efficiency and good effect..
  • 【Perfect gifts】 Come and give your father, husband, brothe....
Check Stock