Top Tight fitting Adapter

Camco 39319 Flexible 3-in-1 Sewer Hose Seal with RhinoExtreme Hose and Handle- Flexible Fitting Makes Connection to a Sewer Inlet Simple and Less Hands On!, Black, Standard

  • The Rhino Sewer Hose Adapter Flexible Drain includes a pre-assembled Rhino Extreme hose with sewer fitting, a 3-in-1 seal adapter and a pull handle. The seal fits in a 3, 3 and 1/2 or 4 inch inlet. No tools or setup required..
  • Adjusts to any angle for better drainage.
  • 3-in-1 seal adapter works with damaged threads.
  • Built-in swivel fitting with odor tight connection.
  • Includes flexible Rhino Extreme and a pull handle.
Check Stock

WORKSHOP Wet Dry Vacs WS12532A Flexible Crevice Tool for Wet Dry Shop Vacuum

  • A shop vacuum attachment provides long, narrow reach that allows the flexible wet dry vacuum crevice tool to lets a user gets into tight spaces.
  • This unique vacuum crevice tool is designed with flexibility that provides side-to-side agility in tight areas, unlike most wet dry vacuum crevice tools that are hard and rigid..
  • 1-1/4-inch diameter vacuum accessories are designed for maneuverability in tight spaces.
  • Flexible crevice tool comes with an adapter so that it fits most shop vacuums equipped with a 1-1/4-inch or 2-1/2-inch diameter vac hose..
  • This shop vacuum attachment cleans hard to reach cracks and crevices unlike most wet dry vacuum accessories that are too bulky for a tight space.
Check Stock

Nilight 2.5\ Mini Projector Lens for H1 Headlights Bulb Retrofit, Custom Headlamps Conversion:Chrome Shround,2 Years Warranty

  • H1 mini projector kits (low/high beams), fit in tight spaces for quad retrofits or fog lamp upgrade.
  • Bulb's type: h1, adapter plates' type: H4/H7.
  • Sets of installation accessories (lock rings, H7/H4 adapter plates, rubber crush Washers).
  • Package includes: 2x mini projector lens, 2x sets of installation accessories (lock rings, h7/h4 adapter plates, rubber crush Washers)..
Check Stock

NEEWER Mic Stand Adapter, 8 PCS Mic Thread Adapter Set, 5/8” Female to 3/8” Male, 3/8” Female to 5/8” Male, 5/8” Female to 1/4” Male, 1/4” Female to 5/8” Male Screw Adapter for Microphone Arm Stand

  • 【Easy Mount with Multiple Adapter】 Have a mic stand that doesn’t fit you mic holder? This set includes 4 types of adapters: 3/8” male to 5/8” female, 5/8” male to 3/8” female, 1/4” male to 5/8” female, and 5/8” male to 1/4” female adapters. Easily find one to fit your mic stand.
  • 【Securely Connect Your Device】 Made of aluminium alloy with a matte black finish, this screw adapter kit is a simple solution to securely connect a light or microphone to your stand/boom arm. All the included screw adapters are durable, sturdy, and won't rust.
  • 【Non-Slip Side Design】 Each screw adapter is designed with external knurling to provide your hands or fingers with a better grip on the adapter. The threading is deep and burr-free, ensuring a secure and tight fit with your device and stand.
  • 【Slotted Base piece】 The 5/8" male to 3/8" female adapter and the 5/8" male to 1/4" female adapter feature a slot at the base of the adapter so you can easily install or remove the adapter with a flat-head screwdriver. Plus, all of the adapters are lightweight and easy to carry.
  • 【Wide Compatibility】 The screw adapter kit is compatible with most mic stands, mic clips, camera stands, recording stands and other accessories with compatible threading. In....
Check Stock

55 Pack Miaozhun .223/5.56.300 Blackout Wool Star Chamber Cleaning Pads with Rod Fitting Adapter

  • These pads are designed to clean the .223Cal/5.56mm/.300blk star chamber,the locking lugs recess on the barrel extension (bolt locking area) and the face of the chamber..
  • Comes with a male adapter(including a nut to keep the pad on the rod adapter), which can be threaded onto any standard 8-32 gun cleaning rod..
  • How to use: thread a star pad onto the cleaning rod adapter,use the nut to keep the pad tight fit on the rod adapter and insert into the chamber. The pad is cut to fit the locking lugs of the .223/5.56/.300 blk star chamber. You can then twist the rod/pad clockwise to wipe behind the lugs..
  • It's better to apply some oil/solvent to soften the gunk/carbon on the chamber, then use the pads to clean,the pads absorb and holds cleaning solvent well..
  • Made of high density compressed wool felt,pretty stiff. Much easier and efficient to cleaning the star chamber than using cleaning patches..
Check Stock

Delko Remodeler's Drywall Taping Tool with Aluminum Inside Corner Roller and Universal Coarse Thread Handle Adapter

  • Best Selling Delko drywall taping/remodeling tool plus pro-grade metal inside corner roller to smooth mud and embed tape. Free coarse thread adapter to fit any handle or extension pole..
  • Delko Banjo is the only taping tool that includes the internal applicator creaser wheel for applying tape to inside corners. Made of super sturdy and lightweight shockproof plastic body. Ultra durable for long life..
  • Apply mud and tape at the same time with the Delko Taping Tool, apply inside corners with the included creaser wheel, then smooth and embed tape with the corner roller..
  • Included Coarse Thread Adapter allows the corner roller to be used with virtually any pole or extension handle, broom stick, paint roller handle, drywall corner roller handle, etc..
  • Great combo for taping smaller jobs, remodels, additions, renovations, or tight spaces like closets and tight corners..
Check Stock

Kurt-Saw Big Carbide Tip, Heavy Duty Blade for Brush Cutter, Trimmer, Weed Eater (OD-10)

  • Good Compatibility: A must have if you are buying the Renegade Blade. Helped out with fitting to weed trimmer. Perfect kits for your S-tihl String Trimmer. Conveniently to Use. Not OEM part..
  • Gardening Machine Lawnmower Kit Size: Screwdriver size: 128 mm/ 5.0inch, Rider plate diameter: 80 mm/ 3.15 inch, Collar Nut Diameter: 25 mm / 0.98 inch, Thrust Washer Diameter: 45 mm/ 1.7 inch. Please Do Check The Size of Adapter Kit before placing the order..
  • Easy to Install: Easy to replace the string spool on the trimmer with the s-tihl adapter kit. Fit tight and there was very little vibration.Adapter Attachment Washer Plate Maintenance Kit Replacement for String Trimmers.
  • Package include: 1 x Thrust Washer,1 x Rider Plate,1 x Collar Nut,1 x Screwdriver.
Check Stock

NDS 640 Square Grate with Low-Profile Adapter Fits 3 in. & 4 in. Drain Pipes & Fittings, 6 in, Black Plastic

  • Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes. 44 GPM flow rate. 14.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
  • place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
  • Grate top is 5-7/8 in. square with ¼ in. grate openings.
  • Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
  • Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
  • NDS grates are a proven alternative to traditional concrete d....
Check Stock

H4 Polarity Converter 2pcs LED Negative Converter Polar Negative Switch Harness Adaptor Reversed Polarity for H4 Headlight Reverse Polarity Converter Kit

  • H1 mini projector kits (low/high beams), fit in tight spaces for quad retrofits or fog lamp upgrade.
  • Bulb’s type: h1, adapter plates’ type: H4/H7.
  • Sets of installation accessories (lock rings, H7/H4 adapter plates, rubber crush Washers).
  • Package includes: 2x mini projector lens, 2x sets of installation accessories (lock rings, h7/h4 adapter plates, rubber crush Washers)..
Check Stock

EZ-Pour Replacement Water Jug or Gas Can Spout

  • Ideal for Tight Spaces: This gas can replacement spout helps pour fuel easily in standard vehicles. In addition, the extendable replacement spout will let you add fuel even in an eminently narrow opening.
  • USAGE: Yellow cap is coarse thread and typically fits Midwest, Scepter and EZ-POUR A1 Chilton adapter, A2 Jerry can adapter, A3 adapter, and A4 Racing Jug adapter and our A5 63MM Adapter. Black cap is fine thread and typically fits older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans.
  • No More Fuel Spillage: Our gas can spout replacement kit allows you to transport or store fuel conveniently. Everything is included in this kit to ensure no fuel spillage or leakage. The universal kit includes a long flexible spout with a spout cap, base cap, thread cap, gasket, flame arrestor & push-in vent to meet all your gas can replacement needs. With this kit, you can easily manage the fuel flow evenly.
  • Update Your Old Gas Cans: With the EZ-POUR gas can spout replacement kit, you don’t have to go through the trouble of replacing your old can. Instead, you can bring your old gas can back to its new condition with our kit for easy storage and transportation of fuel and water.
  • Premium Quality: All the accessories included in the gas can spout replacemen....
Check Stock

JILINWEI Addi Knitting Machine Adapter with Hex Bit Power Screwdriver Attachment for Drill,Quick Knit Power Adapter,Crank Handle Adapter for Addi Express(22 Needles)/King Size (46 Needles),Black

  • ❤Fits ONLY on Addi Express (22 needles) and Addi Express King Size (46 needles)..
  • ❤Are you still cranking your Addi Express (22 needles)/ King Size Knitting Machine(46 needles) by hand? Our power adapter for quick knitting will help you to knit projects faster..
  • ❤Our adapter fits snugly onto the crank of your knitting machine, easy for placed and removed, release your hands. Perfect for beginner knitters to knit your own cool fashion accessories..
  • ❤Durable Conical Design: Please do not use high RPM drills as it may damage the adapter. We still recommend using your power adapter at moderate speed (maximum 180rpm) as these knitting machines are designed to operate manually..
  • ❤Note: It will be a little tight when the first time you use it, Please don’t worry. You need to use a little bit of strength to screw it in, make it fit your machine. It will be perfect after a few times of use..
Check Stock

Huntury Kayak Track Adapter for Fishing Rod Holder, Kayak Rail Adapter for Fishing Finder, Camera, GoPro, Cup Holder, Fishing Kayak Accessories

  • 【NOTE】 This kayak track adapter is only compatibility with Scotty fishing gear, such as fishing rod holder, fish finder, fish cameras mounts, GoPro, Cup holder, Safe Flag and so on..
  • 【ADVANTAGES COMPARE TO OTHER’S】 Other’s kayak rail adapter grips the rod holder or fish finder tight, but not lock them in the place, after couple months, the clip to hold the gear insert will come loose and you will lost your fishing gear. Our kayak track connector are designed lock and unlock to hold the fishing gear in the place, you will never lose your fishing gear..
  • 【A MUST HAVE FOR KAYAK TRACK】 Fits most standard kayak rail and allows you to quickly adjust the position of rod holder, fish finder, and GoPro in the kayak track. This unit locks down at the base and is still able to pan from the upper part of the unit.
  • this allows you to swing cameras and fishing rods around without the base loosening up..
  • 【MULTIFUNCTIONAL】 You can not only use this in addition to the rod holder extender but also position your rod for trolling, storage, or quick access in your fishing kayak..
  • 【SEPER EASY TO INSTALL】 No drilling is needed, simply insert the to the kayak track, then twist the adapter until it is tight, installation takes within 20 seconds.
Check Stock