Top Tighten Cover Nut

Bicycle Kickstands Adjustable, Bike Kickstand Aluminum Alloy Bike Support Kick Stand Side Fit for 24' 25' 26' 27' 28' Tire Cycling Mountain Bike/Road Bicycle/Adult Bike/Sports Bike/Kids Bike (Black)

  • 【Height Adjustable】 The height of bicycle kickstand can be adjusted between 13.8"-15.7" (350-400mm). You can loosen or tighten the screw of center kick stand and adjust its height by using the bicycle bracket with a wrench.Package include free 4mm wrench for you to easily install, 4mm wrench for length adjustment..
  • 【Widely Compatibity】 With the length of bicycle stand is adjustable,the kick stand suitable for many models of bicycles, such as 22" 24" 26" 28" mountain bikes/road bikes/BMX/MTB/urban commuter bikes/children's bikes/sport bikes/adult bikes / 700 road bike.And this bike stand can be installed on both Rectangular tube and oval tube chain stays with a diameter of 15-28mm. 【NOTE】Please choose the size according to the tire mark, as shown in the picture. Not For Snowmobile..
  • 【Stable & Anti-Skid】 Made of firm and durable Aluminum Alloy, top quality and very strong, waterproof and rust-proof, wear-resistant, easy to use and durable. Designed with rubber cover on the bottom of the stand, wider foot cover with anti-skidding design can prevent slipping on wet surfaces and sinking in mud, practical design for supporting the bike stably on the slippery ground.Even if it is often used on hard ground, it does not need to be replaced ....
Check Stock

Metal Flipper Nut, Warehouse Rack & Gondola Shelving, Add Signs to Slot, 100 Pack

  • ...y to the shelf slots in gondola shelving and pallet rack uprights. Can be used with both retail gondolas and warehouse racks to attach signage..
  • Insert the flipper or metal tab into the teardrop hole on the warehouse rack upright or into the shelf slot on gondola shelving uprights. Attach your signage or display and tighten the screw. As the flipper rotates it will catch the interior wall of the rack upright or the gondola shelf upright. When it hits the internal wall the flipper stops spinning and allows you to tighten the screw all the way..
  • Flipper nut is a 1/4" - 20 x 1.25"L threaded screw with a metal flange nut that fits into the teardrop or slot holes on most warehouse rack and pallet rack uprights. It will also work on most gondola shelving slotted uprights. It is used primarily to attach sign holders or retail displays to the upright of the rack..
  • Great for use by retailers to add cross merchandising displays, clip strips or other sign holders or by operations managers in factories and distribution centers to add warehouse rack label holders, warehouse aisle signs, location signs and inventory control signs..
  • Flipper nut is 100% steel metal construction with a long-lasting bright zinc finish. The screw head is Phillips..
Check Stock

Retractable Clothesline, Coolrunner 9.2ft Retracting Clothes Line Indoor Outdoor Heavy Duty Shower Line with 5 Stainless Steel Clothespins

  • Well Made & Sturdy：The retractable clothesline is made of 304 stainless steel and the line is made of braided stainless steel rope can hold up to 33lbs.
  • Adjustable Clothes Line: The heavy duty clothesline is auto retractable, you can adjust the length of clothing line according to the space and the maximum length is up to 9.2ft (Note: Please tighten the nut after you pull the clothesline out).
  • Good for Indoor & Outdoor: You can hang your wet towels, jeans,socks, carpet cloth and quilt in your laundry room, bathroom, balcony,yard ....
  • How to Install: 1.mark the hole position 2. drill holes with 6mm drill bit 3.drive the expansion bolt into the hole 4.tighten the screws 5.cover the base and screw up.
  • A Best Gift for Wife & Mother: The laundry line is a must for women who prefers sun drying instead of drying, you can send it for your mother as a Mother's Day Gift,she will gonna love it..
Check Stock

PEF Mount for Wyze Cam Outdoor, Weatherproof Protective Cover and 360 Degree Adjustable Wall Mount for Wyze Camera Outdoor Indoor Wire-Free Smart Home Camera System (Black, 1 Pack)

  • Exclusive design: This wall mount is designed for all-new Wyze Cam Outdoor. With the buckle button on cover, no need to use screws while putting your wyze camera into or out of the case, convenient and won't rust..
  • Stand up to any weather: Made of premium ABS plastic, this camera case is sturdy and durable enough to protect your wyze cam outdoor from all kinds of potential damages as downpours, blizzards, and heatwaves..
  • 360 degree rotation: 360-degree swivel and 90-degree tilt, allowing anywhere with any angle that you want your camera to point. Loose the plastic nut to make the metal joint adjustable.
  • tighten the nut after you have fixed the angle..
  • Seize the day, Illuminate the night: No influences to the night vision and two-way audio, helps you monitor your home day or night. See, hear, and speak to visitors from anywhere, it’s like being home even when you’re not..
  • Everything included: Full installation kit-each pack comes with 1 camera cover, 1 wall mount, necessary screws and anchors, 1 user guider and worry free money back guarantee..
Check Stock

Pagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2

  • Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
  • This nuts tools A must have for hurricane Snowstorm prone areas.
Check Stock

Tile Leveling System Kit,200pcs Reusable Tile Leveler Spacers+1000pcs 1/12\ Cross-shaped Tile Spacers+5pcs Wrench+50pcs 1/16\ Replaceable Spare Steel T-Pin,Tools for Wall Floor Tile Adjustment(200)

  • Quality material: t-pins steel needles are made of stainless steel, which are durable and sturdy, with nice abrasion resistance, impact resistance, pressure resistance and wear-resistant, can serve you for a long time.
  • Sufficient quantity: the package comes with 100 pieces tile installation tools for tile leveling system, and they be replaced in case of broken or deformed needle.
  • Abundant quantity can meet your daily needs and replacement.
  • Size details: each replacement t-pins steel needle measures about 32 mm/ 1.26 inch in length, thickness is about 1/16 inch/ 1.5 mm, the right size is suitable for tile space between 2 to 6 mm, and suitable for tile with a thickness of 0.12 inch/ 3 mm to 0.63 inch/ 16 mm.
  • Apply to: the replaceable t-pins needles kit fits well for floor/ wall setting.
  • The system ensures flatness between tiles avoiding movements during the mortar setting.
  • Easy to install: replaceable pin tool is easy to use, only need to remove the nut cover, insert the T-pin steel needle into the groove, put the red cover into the groove, and tighten the nut cover.
  • Remove the T-type straightener about 5-6 hours after leveling before the tile binder or cement is completely dried.
  • It will increase tile installation speed and be more cost effective.
Check Stock

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

PEF Mount for All-New Wyze Cam V3 ONLY, Weatherproof Protective Cover and 360 Degree Adjustable Wall Mount Solid Housing for Wyze V3 Outdoor Indoor Smart Home Camera System (White, 3 Pack)

  • Exclusive design: This wall mount is designed for all-new Wyze Cam Outdoor. With the buckle button on cover, no need to use screws while putting your wyze camera into or out of the case, convenient and won't rust..
  • Stand up to any weather: Made of premium ABS plastic, this camera case is sturdy and durable enough to protect your wyze cam outdoor from all kinds of potential damages as downpours, blizzards, and heatwaves..
  • 360 degree rotation: 360-degree swivel and 90-degree tilt, allowing anywhere with any angle that you want your camera to point. Loose the plastic nut to make the metal joint adjustable.
  • tighten the nut after you have fixed the angle..
  • Seize the day, Illuminate the night: No influences to the night vision and two-way audio, helps you monitor your home day or night. See, hear, and speak to visitors from anywhere, it’s like being home even when you’re not..
  • Everything included: Full installation kit-each pack comes with 1 camera cover, 1 wall mount, necessary screws and anchors, 1 user guider and worry free money back guarantee..
Check Stock

PANZHENG 5 Pcs 6 Inch Mini Chainsaw Chain With 2 Pcs Replacement Saw Chain Bar Replacement Chains For 6 inch Mini Cordless Electric Portable Battery Powered Handheld Chainsaw

  • ...links 6 inch chainsaw chain, Cannot replace chain with less than 36 drive links or more than 38 drive links. Please confirm drive links of your original chain before purchasing.
  • [ EASY TO REPLACE ]: Use a nut driver to open the side cover, replace the original chain with one of our chains, install the side cover and tighten the nut, then use a screwdriver to turn the screw to adjust the tightness of the chain. NOTE: Please pay attention to the direction of cutter teeth.
  • [ SHARP AND STRONG CHAIN ]: Chain is deeply quenched to ensure smooth cutting and optimal lubrication. The service life of the saw chain is longer and smooth, lightweight, wear-resistant, and cuts smoothly.
  • [ GOOD SERVICE ]: We offer 60 days money back Guarantee, 2 years product warranty. If you have any questions about the 6 inch mini chainsaw chain, please feel free to contact us.
Check Stock

Xcover Truck Bed Cover Tonneau Cover, Compatible with 2017-2023 Ridgeline, Low Profile Hard Folding Truck Bed Cover

  • ...n: Solid Core Hard Panels can be rated up to 500lbs of evenly distributed weight.Please see the video on the left for installation , it is completely assembled for easy No-Drilling installation in minutes. ATTENTION: Make sure the Flat Washer and Spring Washer are all placed on bolt before screw the plastic nut on. TIGHTEN ALL BOLTS & NUTS BEFORE DRIVING!.
  • 5 Years Warranty: Against defects in materials and workmanship under its intended use, Please be assured to use our tonneau cover, any questions, please contact our customer service. WARNING: Always make sure the clamps and bolts are tightened before driving, never drive with a cover in partially opened position..
Check Stock

BleepinJeep Yoke Wrench Tool

  • Fits many style yokes or flanges, axles or transfer cases. Used to hold the yoke in place while applying torque on the nut/pinion nut and for setting bearing pre-load. Perfect for loosening stubborn pinion nuts or for high torque applications such as a crush sleeve that requires 250 ft. lbs..
  • Use a 1/2” breaker bar or a 3/4” black pipe (available at any hardware store) for leverage.
  • Hole is over 2” and fits most sockets. Use a breaker bar to loosen or a torque wrench to tighten retaining nut to spec..
  • For higher torque applications use a grade 8 bolt with a shoulder so the threads arent taking the load..
Check Stock

Bekith 2 Pack Beverage Dispenser Replacement Spigot, Stainless Steel Polished Finished Water Drink Dispenser Replacement Faucet

  • Bekith 2 pack durable beverage dispenser replacement spigot makes serving easy, keeping your dispensers running more efficiently.
  • Made of high quality lead free food grade stainless steel, non- corrosive and extremely durable. No lead, no rust and leak-free, they can last a lifetime under proper appliance..
  • Fits 5/8 of an inch or 16mm openings and fits beverage dispenser up to 11/16 inch or 17 mm thick. Works for most self-serve and traditional beverage service..
  • Ideal for dispensing your favorite lemonade, sun tea, kombucha, wine, juice or water at parties and wedding receptions..
  • Tips: Wash before use. For easy assembly use a ¾ inch wrench to tighten the nut, do not over-tighten, for optimum care rinse after using when nut is loosened and handle partially opened..
Check Stock