Top Tile Cutting Hole Saw

Diamond Hole Saw Cutter Tools Coated Drill Bit Angle Grinder Hole Opener for Ceramic Marble Stone Glass(60mm), Hole Saw

  • PREMIUM DIAMOND MATERIAL: Hole saw cutter tools is made of premium diamond material with high hardness, so it is durable in use..
  • HIGH DRILLING SPEED: Diamond hole saw has high drilling speed, neat and smooth opening, and has no broken edges..
  • SPECIAL DESIGN: Chip removal hole design reduces cutting resistance for easier drilling, it effectively improves work efficiency..
  • PAINT SPRAYING TREATMENT: Paint spraying treatment can avoid rusting of the drill bit..
  • SCOPE OF APPLICATION: Diamond hole saw is suitable for opening and coring of marble, stone, vitrified tile, ceramic tile, etc..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

Tile Cutter Hand Tool Cut Floor Tile Glass Tile Cut Tiles Straight or Quarter Curve Manual Tile Cutter Tool for Cutting Wall Tile Porcelain Tile and Glass Tile Faster and Cleaner than a Wet Tile saw

  • ...rill Holes For Grab Bars Shower Doors And Towel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cutter by The Grips When Scoring as You Cannot Apply Pressure to The Handheld Tile Cutter Blade If Held Far Back. If You Do Not Follow These Instructions It Will Not Work for You. DOWNLOAD THE USER GUIDE for Extra Hints and Tips.
  • How To Cut Glass Mirror Stained Glass Sheets Instructions With Tips And Trade Secrets. Do You Know Anybody That Didn’t Break the Last Piece o....
Check Stock

Tile Cutters Tile Tools for Cutting Ceramic Tile Glass Tile Cut Straight Lines and Curved Lines Cleanly No Wet Saw No Mess Cut Faster and Cleaner than a Wet Tile saw Replaceable Blade Cuts 1000 Feet

  • ...wel Rails, Kit 3 Includes Diamond Tile Hole Saw And Guide For Shower Head Or Faucets..
  • No Wet Saw Rental No Messy Tile Saw, Even Professional Tile Setters Don't Like the Mess a Wet Tile Saw Makes and Even the Best Diamond Blades Can Chip the Edges of The Tiles Forget About Cutting Glass Mosaic Backsplash Tiles on Mesh with Water Saw They Chip Scrunch Up Fly Away and When They Get Wet, They Fall Off Anyway. So, You End Up Pushing Each Tiny Tile Through the Wet Saw with What’s Left of Your Fingers. So, No More Running in And Out the House with Every Tile for Every Single Cut..
  • Not the Old-Fashioned Glass and Tile Cutter It's Not Sharp Its Hard, You Must Apply Pressure to Tile Cutting Wheel to Work Only Work If You Soak Cutter Wheel in Oil and Keep Oiling. Score Tile at Waist Height Not on a Floor. Must Use 2 Hands to Score Hard Tile Never Hold Cutter by The Grips When Scoring as You Cannot Apply Pressure to The Handheld Tile Cutter Blade If Held Far Back. If You Do Not Follow These Instructions It Will Not Work for You. DOWNLOAD THE USER GUIDE for Extra Hints and Tips.
  • How To Cut Glass Mirror Stained Glass Sheets Instructio....
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

LENOX Tools Hole Saw, Diamond Grit, 1/4-Inch or 6.4mm (121074DGDS)

  • Each LENOX hole saw has a continuous, brazed edge that lasts longer in tile and stone.
  • The diamond-tip hole saw uses a low-torque design that requires little pressure for fast cutting.
  • An over-sized slot in the LENOX Diamond hole saw allows for easy plug removal.
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Milwaukee Electric Tool 49-56-0305 Recessed Light Hole Saw, 6-3/8\ D

  • For best results, 600 RPM is recommended.
  • 6-3/8 in. diameter 1-3/4 in. depth of cut.
  • For cutting through drywall, plaster, acoustical tile, ceiling tile and stucco with wire mesh backing.
Check Stock

Hole Saw Guide, Multiple Sizes Unique Design Sturdy Durable Hole Saw Guidance Fixture for Glass Drilling

  • Unique Design: This tile glass hole saw guide is designed to locate and drill drill glass, ceramic tiles, marble, etc..
  • Multiple Sizes: This tile glass hole saw guide is applicable 4 to 12mm holes, meeting your different needs..
  • Premium Material: This tile glass hole saw guide is made from premium ABS and rubber material, which is sturdy and durable..
  • More Convenience: Suitable for those hard to get awkward areas, such as drilling horizontally in tiled wall or vertically in floors..
  • Firm Attachment: This tile glass hole saw guide attaches to most tiled surfaces by means of its lever operated vacuum base..
Check Stock

HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster

  • 2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
  • Not recommended for cutting metal sheet, concrete block, cement tile.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
  • 【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check Stock

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock