Top Tile Drill Saw

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 100mm(4"),total length: 56mm(2.2").Package includes 1 pcs 100mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

4-1/2” Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 115mm(4-1/2"),total length: 56mm(2.2").Package includes 1 pcs 115mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Ladieshow Hole Saw,Diamond Drill Bits Marble Ceramic Tile Wall Glass Angle Grinder Hole Saw Tool(32mm)

  • [Sturdy Hole Saw ]These diamond drill bits are made of industrial grade carbon,which is sharp and durable,has a long service life.
  • [Easy Job Done]Professional design dedicated to angle grinder, it is more labor-saving,the holes are neat, smooth and without broken edges, and no tremor effect.
  • [High Efficiency]Tile tools using hot pressing technology, the blade is thick to achieve excellent cutting strength.
  • [Wide Application]Tile drill bits suitable for marble, ceramic tile, vitrified tile, floor tile, full tile, stone, jade and microcrystalline stone.
  • [Friendly Reminder]Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Rokrou Diamond Drill Bits Diamond Brazed Hole Saw Kit 10PCS Tile Drill Bit with Hole Saw Guide from 6 -50mm /1/4\-2\ for Tile, Drill, Glass, Marble, Granite …

  • 【10 ᴛɪᴍᴇs ʟᴏɴɢᴇʀ ʟɪғᴇ ᴛɪᴍᴇ】Processed with brazing technology, premium level super fine diamond sand is attached to the coated steel body. Our Brazed Hole Saw can last 10 times longer than an ordinary hole saw..
  • 【ᴍᴜʟᴛɪᴘʟᴇ sɪᴢᴇs】The diamond hole saw contains ten different sizes, including 6mm/0.24" 8mm/0.31" 10mm/0.39" 14mm/0.55" 18mm/0.71" 22mm/0.87" 25mm/1" 32mm/1.26" 40mm/1.57" 50mm/1.97"..
  • 【ғᴀsᴛᴇʀ ᴅʀɪʟʟɪɴɢ ᴡɪᴛʜ ʙᴇᴛᴛᴇʀ ᴅʀɪʟʟ】Compared to the ordinary material hole saw, our drill with fine diamond sand can drill holes on hard materials such as tile, drill, glass, marble, granite, much faster..
  • 【ᴅʀɪʟʟ ɢᴜɪᴅᴇ】No need to worry about scratching your tile when drilling the hole. Our Adjustable hole saw drilling guide with a suction cup and 4 bearings will hold the diamond hole saw still during the process. From 6mm to 50mm all the hole saws can fit in this guide..
  • 【ᴛɪᴘs】When the diamond drill bit is working, continuous cooling with water is key to reduce the chance of burning your bit, extending the life of the drill..
Check Stock

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Hole Saw Set 7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture 1-3.15 inch Coated Core Drill Bits Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable..
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken....
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws..
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes....
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone.
Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

  • DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
  • EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
  • WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
  • DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
  • Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..
Check Stock

Glass Drill Bit Set,5 pcs Diamond Bits Hole Saw Bottle Extractor Remover Tool for Ceramics,6-14mm Set Drilling Granite Porcelain Tiles Pot Lamp Quartz Slate Pieces Fish Tank Pack Coated Grit

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes..
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life..
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • 【WIDE USAGE】5 varied size drill bits Included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone..
  • 【100% Satisfaction Guaranteed】We are committed to making sure that you have a satisfying purchase experience, so if you have any questions or sugguestions, please contact us.(Log in to your account, check the order ID and click "Contact Seller" to contact us.).
Check Stock

Drilax Diamond 3 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick Cinder Block 3/8 inch Standard Shank Rotary Tools

  • Industrial heavy duty, commercial quality, durable 3 inch core drill bits for concrete, exactly 3 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 3 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop,....
  • 3 inch concrete core saw hammer drill bits for concrete.
  • Laser welded concrete hammer core bit fits your standard drill..
Check Stock

1 1/4 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Tiles Quartz Granite Countertop Glass Bottle 1.25 inch Tile Drill Bit 1-1/4 inch Hole Cutter

  • 1-1/4 inch Premium Quality Diamond Hole Saw Solid Steel Body: Spins True, Cools Better, Lasts Longer.
  • Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
  • Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Increased Body Height for Deeper Cuts Clean, Precise, Fast, and Dustless Cuts Every Time.
  • Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.
Check Stock