Top Tilt Latch Screw

SWNAQUY CZMY 105x50mm Stainless Steel Boat Locker Hatch Anti Rattle Latch Fastener Hold Down Clamp-Locking Cam Latch Boat Caravan 90 Degree

  • Boat cam latch is with pefect finish and polished 316 stainless steel.
  • Marine latch flush door pull can be recessed into the hatch.
  • Boat latch supplies stainless steel hinge pin.
  • Boat hatch handle, locking arm height is adjustable which is secured with set screw.
  • Stainless steel cam latch, 3.68" Length and 2.99" width. overall height: 4.92" · The Screw hole on the patch is 0.21".
Check Stock

Prime-Line F 2598 Tilt Latch Pair, White Plastic Construction, Spring Loaded, 2 inch Hole Center Spacing

  • Used on single and double hung windows alike.
  • The plastic thumb latch locks and releases spring loaded latch.
  • Includes 1 left and 1 right spring-loaded tilt latch.
  • All necessary mounting hardware is included for a quick and easy installation.
Check Stock

Push Barrel Bolt Latch Slide Lock ATTHW® 2 Pack 3 Inch Spring Stainless Steel Barrel Locks for Garage Sliding Gate Latches for Inside Door Press Button Hardware for Rv, Toilet, Bathroom Shed Cloakroom

  • ..., cracking, and rust. Make these metal door lathes & bolts are long-lasting to hold up to outdoor exposure in the sun. The bolt and push-pin with carefully welded together make a smooth movement..
  • ✅Wide Application: The thicker edges and smooth surfaces will not hurt your hands when installed. the push barrel bolt latch is great as a replacement bolt latch perfect for room doors, boxes, yards, fences, cabinet doors, shed, chests, closets, kennels, chicken coop, and windows..
  • ✅Easy to Install: 1.Decide where you want the lock and take the small side piece hold it up against the frame.2.Use a pencil to make two circles, pre-drill, then screw in with the screws. 3.Take the larger piece and push the bolt across so that it’s through the piece you’ve already installed to hold it in place.4.Use a pencil to mark the upper left-hand place for the screw for the first hole. 5. Once you have one screw installed it’s much easier, again pre-drill and then installs other screws..
  • ✅What You Get: 2 x Barrel bolt latch silver, 12 x Screws (Warm Tip: For single doors, you can install one barrel bolt latch on top, middle, and bottom randomly. For double doors, you can install one bolt latch on the top and bottom randomly. But you cannot install only one bo....
Check Stock

HOME MASTER HARDWARE 10 Pack 4 inch Hook and Eye Latch Cabin Hook Eye Latch Gate Door Hook with Mounting Screws

  • The cabin hook eye latch manufactured from zinc-plated steel material,durable,sturdiness and long-lasting use..
  • Easy to use and install,the screw hook with sharp tip, not easy to bend or deform,and can be easily installed and inserted into wood, plywood or drywall ..
  • Ideal for hanging and fixing light weight to medium weight tool on latching doors, screens, cabinets and gates and many different places to hang various items..
  • Package Inlcude 10 Pack steel hook and eye latch, screw fixed type, including hook and eyecup lock, simple unlocking design hook-shaped latch allows you to quickly unlock and accurate matching..
  • Home Master Hardware Lifetime Warranty - If anything ever goes wrong with your hook and eye latch, please contact us,we will replace them with new ones or full refund ,and provide best service (lifetime tech support, 12 month replacement) ..
Check Stock

Game Room Guys Plumb Bob with Thumb Screw

  • PLUMB BOB WITH THUMB SCREW Replacement - Replacement Plumb Bob with Thumb Screw for Pinball Machine.
  • FOR TILT FEATURE ON PINBALL - This is the Component that Controls the Tilt Feature in Most Pinball Machines.
  • VERSATILE PINBALL PART - Part Works on Many Makes of Pinball Machines.
  • DIMENSIONS - 1-5/8" H x 1" Base Diameter.
Check Stock

2Pcs Barn Door Latch, 4 Inches Privacy Hook and Eye Latch with 8Pcs Mounting Screws, Solid Thicken Stainless Steel Cabin Hooks, Best for Sliding Barn Doors, Bathrooms, Windows, Bedrooms, Closet

  • 【High-Quality / Stronger and Durable】This eye latch is made of premium solid thicken stainless steel and coated with 2 layers black powder coating, With Corrosion resistant, non-fading, not easy to break, durable in all weather, anywhere..
  • 【Excellent Design】 the curved design of the new door latch is smooth and elegant, adding a fashionable but subtle retro flavor to any decoration. The design of countersunk mounting screw hole makes the screw not appear on the outside, so it is more beautiful and safer..
  • 【Safe and Practical】The privacy hook is designed for safe applications with a unique end hook design that does not automatically unlock even when pressure is applied. At the same time, it can prevent toddler and pets from sneaking away from the room, providing extra security for you and your family..
  • 【Wide Application】The barn door latch is suitable for most doors, such as cabin door, sliding door, revolving window, bathroom, cabinet, shed, shutter, storage room, door, engine room door, etc..
  • 【Easy to Install】Each installation kit contains gate latch and mounting screw. The length of the whole door lock is 4.56 * 1.36 * 0.57in. It can be fixed directly to wood or other flat surface. Very convenient. If you have any question, ple....
Check Stock

Woopeey 8 Pcs 1.25 inch Universal Aluminum Vehicle Hood Pins-Quick Release Lock Latch Bumper, License Plate Lock Clip, Push Button Bonnet

  • ...ke even when drifting or turning, and it will lock the hood firmly when driving on the road or being hit by others. It must be drilled to properly install it on the hood..
  • [ FEATURES ] - Made of high-quality aluminum and stainless steel, not easy to corrode and very durable. Very suitable for car hood, quick release latch suitable for all vehicles. It can be widely used in furniture, cabinets, or any other purpose you can imagine..
  • [ PREMIUM QUALITY ] - Each quick release device will be 100% tested before leaving the factory to ensure product quality and ensure that the latch button works smoothly without hindering the feel..
  • [ INSTALLATION ] - Screw the nut and washer into the screw, put it in the hole of the engine cover, and fix the screw. Apply a little black grease to the top of the screws, close the hood, and press the hood lightly. After opening it, you can see a black dot printed on the screw cover, piercing the black dot. During the punching process, place the button cover on the hole and observe whether the size is appropriate..
  • [ GUARANTEE ] - If the quick release latch has any quality or other problems, please feel free to contact us, we try our best to provide you with a satisfactory solution within 24 hours..
Check Stock

Really Right Stuff MH-01 High-Capacity Monopod Head with B2-Pro II Clamp,75 lb Capacity

  • MH-01 High-Capacity Monopod Head - B2-PRO-II 2.36" Screw Knob Clamp - Flat-Head 1/4"-20 x 3/4" Clamp Mounting Screw - 5/32" Hex Key - User's Guide - Really Right Stuff 5 Year Limited Warranty.
  • 75-pound tilt lock capacity with nylon brake system.
  • Oversized tilt lock knob for easy grip and operation.
  • 1/4"-20 socket with anti-twist bosses provides non-twisting mount for RRS clamps (B2-AS-II, B2-Pro-II, or B2-40-LR).
Check Stock

Heavy Duty Slide Bolt Gate Latch Hardware, 6.3 Inch Solid 304 Stainless Steel Latches Electroplating Finish, Barrel Bolt Lock for Wooden Fence, Yard Door, Barn Door, Shed Door, Interior (Black)

  • 【Upgrade Stainless Steel Door Lock and Screw】The fence gate latch is made of high quality heavy duty 304 stainless steel with black finish, elegant and beautiful look,rustproof, durable and wear-resisting, apply the upgrade 304 stainless steel screw to help fix the gate latch more deep and firm..
  • Padlock Hole Dia: 3/8″(9mm) (Note: This door latch doesn't include padlock).
  • 【Two Installation Methods】: The barrel door slide latch lock can be installed on any side & direction: left, right, vertical or horizontal.
  • it can be used as right angle barn sliding door lock, sliding barn door lock and bolt lock cam lock, privacy lock, door lock buckle.
  • If you install it on the bottom, such as ground, you can use door latch + dust canister..
  • 【Easy to Install & Multipurpose】: Simply fit the 90/ 180 degree sliding barn door lock hardware to your door frame, mark the height and mounting holes and mount to your door jam with the supplied stainless steel screws and expansion tube. Sliding barn door flip latch is suitable for wood gates, m....
Check Stock

YMHHefy Blue Quick Latch Hood Pins 2.44\ Diameter Universal Quick Release Latch Push Button Quick Release Hood Bonnet Pins Lock Clip Kit for Hood Bumper or DIY 2Pcs

  • ...ke even when drifting or turning, and it will lock the hood firmly when driving on the road or being hit by others. It must be drilled to properly install it on the hood..
  • [ FEATURES ] - Made of high-quality aluminum and stainless steel, not easy to corrode and very durable. Very suitable for car hood, quick release latch suitable for all vehicles. It can be widely used in furniture, cabinets, or any other purpose you can imagine..
  • [ PREMIUM QUALITY ] - Each quick release device will be 100% tested before leaving the factory to ensure product quality and ensure that the latch button works smoothly without hindering the feel..
  • [ INSTALLATION ] - Screw the nut and washer into the screw, put it in the hole of the engine cover, and fix the screw. Apply a little black grease to the top of the screws, close the hood, and press the hood lightly. After opening it, you can see a black dot printed on the screw cover, piercing the black dot. During the punching process, place the button cover on the hole and observe whether the size is appropriate..
  • [ GUARANTEE ] - If the quick release latch has any quality or other problems, please feel free to contact us, we try our best to provide you with a satisfactory solution within 24 hours..
Check Stock

Solid Brass Bar, Cabinet Door Flush Mount Right Hand Latch | Old Icebox Latch | Antique Shutters, Cabinet, Cupboard, Furniture Hardware | I10-B323SBR

  • Material/Finish: This old fashioned flush mount bar latch is made of solid brass.
  • Size Latch: Centers: 1" and 1 1/4" , Base Dimensions: 2" x 1 3/4" x 1/8" , Latch Length: 2 3/8".
  • Size Strike Base: Centers: 1" x 1/4" (25.4 mm x 32 mm), Dimensions: 2" x 1 3/4" x 1/8".
  • Use: The right hand bar latch works perfectly w/ antique shutters, cabinet doors & ice boxes.
  • Package includes (1) one right hand unfinished solid brass bar latch (requires #7 wood screw).
Check Stock

Zhiyun Smooth Q2 [Official], 3-Axis Handheld Smartphone Gimbal Stabilizer for iPhone, Samsung, Android, iOS, with Time-Lapse Vertigo Shot Object Tracking

  • 【Quick Release Clip】Utilizing the quick release latch design, SMOOTH-Q2 is able to transform your smartphone into a professional camera within a split. Providing an easy transition between standby mode and shooting mode. Smooth-Q2 does not require any re-balancing when the clip is re-attached back..
  • 【Pocket-Size Smartphone Gimbal】Aerospace-grade aluminum alloy on Smooth-Q2 enhances the compactness and stability.
  • 【Reach More Creativity】Smooth Q2 supports 360 degrees of rotation and has 3-axis stabilization, containing a Tilt motor, a Roll motor, and a Pan motor. Unleash your artistic side with SMOOTH-Q2 such as timelapse, vertigo shot, object tracking, and panorama, etc..
  • 【Smart Control Panel】Smooth Q2 simplified all the controls to one LED indicator, two buttons, and one 5 way control joystick, which is intuitive and convenient. The common 1/4" screw thread fitting makes Q2 compatible with most add-on accessories in the market..
  • 【17h Battery Life】Power on your eventful day and charge your devices on the go if necessary.
Check Stock